INTERVAL Quick Start Guide What’s in the Box: INTERVAL headphones and USB cable.
How to charge battery: The battery is charged with a special USB charger cable. #1 – Connect the cable to the INTERVAL There are 2 pins INTERVAL body at the back. Attach the charger cable and line up the pins. A magnetic force will pull the connector in when it is in correct place. Make sure the connector pins are clean and dry when connecting and charging the INTERVAL. LED light will be RED when charging. When battery is full – LED light will turn off TIP: DO NOT move the INTERVAL when it is connected.
How to wear: The speakers are marked L and R. Attach the swim goggle straps through the slots on the speakers. For best sound experience - orient the speakers to be in front of the ear. You can try and find a location on the goggles that provides the best sound. Bone conduction sound works by the vibration of the speaker that is conducted to the inner-ear.
Green Light: - Solid: Playing from memory - Slow blinking: Music is paused Blue Light: - Solid: Bluetooth mode – connected. - Slow blinking: Looking for Bluetooth connection We are Happy to Help : ) For more tips and videos – please visit the H2O Audio INTERVAL page: https://h2oaudio.com/pages/interval-user-guide For any issues or questions, please contact us directly Email: support@h2oaudio.com Web: h2oaudio.
FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.