Datasheet

MADE in CHINA
- EN 60974-1
MULTIWELD FV 220M-C
 

MMA

MIG
ømm
ømm

Ø mm
équipé d’origine /
original equipement
/ originalausstatung
/ equipamiento de
fabrica
MIG-MAG
EN 60974-1 (40°C)
MMA
EN 60974-1 (40°C)
U
0
 
IP
 
Protected
& compatible
power generator
(+/-15 %)
50/60 Hz A A A
GAS
NO
GAS
200 300 Ø mm
Electronic
Control
m/min
IA
(60%)
100%
IA
(60%)
100%
V cm kg
230 V 1~ 16 30  200 30  220
0.6
-
1.0
0.9
-
1.2
1.6  5 2  15
0.8
1.0
160 A 120 A 140 A 100 A 75
58 x 52
x 34
24 IP 23 9 kW
110 V 1~ 32 30  120 30  140 1.6  3.2 2  11 110 A 90 A 100 A 80 A 67
WELDING MACHINE
MMA / MIG-MAG
INVERTER
30  220 A
Ref. 065499
MIG/MAG welding :
- steel wire: Ø 0.6 to 1.0 mm
- stainless steel wire: Ø 0.8 to 1.0 mm
- aluminium wire: Ø 0.8 and 1.0 mm
- cored wire (reverse polarity): Ø 0.9 to 1.2 mm
MMA welding: basic and rutile electrodes (up to Ø 5 mm).
ACCESSORIES (options)
MULTIPROCESS
ROBUST
IP 23 classication for outside use.
Accepts very long extension cords (100 m).
2 steel handles for easy manipulation.
Protected against overvoltage up to 400 V (PROTEC 400).
The MULTIWELD 220M-C is a compact single-phase welding machine, combining MIG/MAG, cored wire and MMA welding
processes. It operates on a supply voltage between 85 and 265 V thanks to its FV (Flexible Voltage) power supply. Equipped
with an accurate 4-roller wire feeder system and a reinforced structure with 2 handles for lifting and slinging, it is ideal for
welding in the workshop and for quick troubleshooting on site.
www.gys.fr
INTUITIVE
Display readable even in bright light.
Simple user interface with ergonomic controls
allowing gloved use.
Welding voltage
Choice of the trigger mode: 2T or 4T.
Welding guide: tables assist the user to adjust and ne tune the voltage and the
diameter of the ller wire according to the thickness of material being welded.
OPTIMISED MIG/MAG SETTINGS
INTEGRATED WIRE FEEDER
Compatible with reels : Ø 200 / 300 mm
Wire feeder with 4 rollers for an ecient wire feeding.
EURO torch connector for quick assembly/disassembly.
PRE-HEATING, PURE CO2
Pre-installed socket (36 V - 4.2 A) for gas heater in pure CO2 welding
(heater not included).
Compatible with US (type A) and EURO electrical sockets (type C/E/F).
Arc dynamic
MIG/MAG: Wire feed speed
MMA: Welding intensity
Trolley
JOB SITE XL
039568
Supplied
with
MIG25 - 3 m
2.5 m - 25 mm²
2 m - 25 mm²
Drive rolls type A
Steel / Stainless
steel
Ø 0.6 / 0.8
x1
042339
Ø 0.8 / 1.0 041189
Aluminium Ø 0.8 / 1.0 041196
Cored wire Ø 0.9 / 1.2 042346
Consumables box
MB25 (250 A)
041233
Welding kit for
cored wire
Ø 0.9/1.0 & 1.2 mm
072336
+
042346 (x1)