Gouging processes MAGYS 500 GR / 500 WS CUTTER 85A / CUTTER 125A TRI Arc-air® Gouging Plasma Gouging www.gys.
Arc-air® Gouging The purpose of this process is to use copper coated carbon gouging electrodes for a good transfer between the electrode and the metal. The melted metal is removed by compressed air. The Oxygen present in the compressed air will oxidise the metal in fusion thus limiting its grip to the metal. APPLICATIONS • Remove defective welds. • Remove cracks and re-weld. • Remove excess material. • Prepare surface for root welding. • Prepare joints before welding.
Plasma Gouging This process is the best alternative to traditional gouging more particularly when precision and safety are priorities. With a removal capability of up to 8 kg/h, Plasma gouging improves operating conditions by reducing noise and fumes. Using the same process as Plasma cutting it enables the removal of metal efficiently, precisely and cleanly. APPLICATIONS • Correct defective welds. • Prepare weld reinforcements on a root weld.
Accessories and consumables Gouging start-up Arc Air® Gouging - MAGYS 500 GR / 500 WS 1 OP V Gouging electrode holder 1000 A TIM A L S YN E R G 10 -1 MADE IN FRANCE IC 15 -2 041516 mm MANUAL m/min 4T SPOT 2 Screw the gouging adaptor to the torch +3 1 24 m/min M A N UA L SYNERGIC -4 2 2T 3 20 -3 SYN TEST to the compressed air supply. 2 +2 5 A press 3s 1 Connect and screw the gouging torch 1 +1 and connect it to the rear of the Magys.
