STOCKHOLM owner’s manual
You’ve chosen well The Vifa Stockholm. A loudspeaker for anyone who values exclusive Nordic design and authentic sound. It’s designed to be intuitive for you to use. This manual just spells out the details - for instance, how to connect wirelessly in a flash.
IMPORTANT SAFETY INSTRUCTIONS Regulatory Safety Information 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
IMPORTANT STATEMENTS: This device complies with Part 15 of the FCC Rules. Its operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Cet appareil est conforme à la section 15 des réglementations de la FCC. Le fonctionnement de l’appareil est sujetaux deux conditions suivantes: Cet appareil ne doit pas provoquer 1.
Buttons and indicators on Stockholm............................................. 6 Status indicator............................................................................... 7 The Vifa remote.............................................................................. 8 Input options................................................................................. 10 Connecting priority....................................................................... 11 Connecting to Stockholm Bluetooth .........
BUTTONS AND INDICATORS ON STOCKHOLM You can change the light intensity of the status indicator using the Vifa app.
STATUS INDICATOR No light – Stockholm is in standby mode or is off Breathing – Stockholm is hibernating (Stockholm will automatically go into hibernation after 5 min. without signal) To wake up Stockholm press the POWER button. • From standby: press until the status indicator flashes WHITE. • From hibernation: play music on one of the inputs, or briefly press the power or one of the vol. buttons.
THE VIFA REMOTE The Vifa remote lets you easily control your Stockholm loudspeaker from anywhere in the room. Turn up the volume of your favorite music or easily set up your Stockholm to your preferred connection, like Wi-Fi Direct, your Wi-Fi network or via wired input.
Changing the VIFA remote battery Replace the battery with a CR2025 battery. To replace the battery: 1. Use a coin to remove the battery compartment cover. 2. Remove the battery. 3. Insert a CR2025 battery with the positive side facing up. 4. Replace the battery compartment cover and use a coin to tighten it.
INPUT OPTIONS • Bluetooth Fast and easy and works for virtually every phone, tablet or MAC/PC - supports aptX for Hi-Fi sound. • Wi-Fi Works for phones, tablets, MAC/PC Wi-Fi and networked DLNA enabled devices - supports Wi-Fi Direct. • Wired optical or analog For music players, media players or televisions. • Wired USB USB playback works for iOS. USB will charge your device.
CONNECTING PRIORITY Stockholm automatically selects input for you based on the following rules. 1. 1st priority is Wi-Fi and USB If Wi-Fi or USB is connected and playing music, other connections are disconnected. 2. 2nd priority is Bluetooth If Bluetooth is connected and playing music, a wired analog or optical connection will be disconnected. 3. 3rd priority is wired When no Bluetooth, USB or Wi-Fi is used, you can use the wired input.
CONNECTING WITH BLUETOOTH Fast and easy wireless connection for virtually every phone 1. Enable Bluetooth pairing on your device and select Vifa BTxxxxxx as your Bluetooth device. 2. Let the music play, the status indicator turns BLUE when Stockholm receives the music. 3. Adjust the volume on Stockholm, with the remote or your device. Note: Release of the Bluetooth pairing can be done either on the paired device, on Stockholm or with the Stockholm remote.
CONNECTING WITH Wi-Fi DIRECT For AirPlay and DLNA direct playback 1.1 On Stockhol m: Press and hold the CONNECT button until the status indicator flashes WHITE rapidly and then release the CONNECT button – the indicator will now start to pulse until it receives a music signal. 1.2 With the rem ote: P ress and hold the CONNECT button until the status indicator flashes WHITE rapidly and then release the CONNECT button – the indicator will now start to pulse until it receives a music signal. 2.
CONNECTING TO YOUR Wi-Fi NETWORK Manual setup 1.1 On Stockholm: Press and hold the CONNECT button until the status indicator flashes WHITE rapidly and then release the CONNECT button – the indicator will now start to pulse until it receives a music signal. 1.2 With the remote: Press and hold the CONNECT button until the status indicator flashes WHITE rapidly and then release the CONNECT button – the indicator will now start to pulse until it receives a music signal. 2.
e e l http://192.168.1.1 VIFA AIRPLAY SETUP 5. Now the Stockholm setup page open up. 6. Choose your preferred network and enter the password if needed. Then type in the name you want displayed for Stockholm on the network ex. “Stockholm Living room”. 7. Then press “Apply”. 8. When the status indicator turns solid WHITE the connection is established. 9. On your device, remember to change network back to your preferred network.
CONNECTING TO YOUR Wi-Fi NETWORK Using iOS device 1. Make sure your iOS device is connected to your network. 2. Connect your iOS device to Stockholm using a USB cable. 3.1 On Stockholm: Press and hold the CONNECT button on Stockholm until the status indicator flashes YELLOW rapidly and then release the CONNECT button.
3.2 With the remote: Press and hold the CONNECT button until the status indicator flashes YELLOW rapidly and then release the CONNECT button. 4. The iOS device will ask you if it may transfer network settings to the speaker. Press Allow on the iOS device. 5. When the status indicator on Stockholm turns solid WHITE, the connection is established.
CONNECTING TO YOUR Wi-Fi NETWORK Using WPS WPS 1. Press WPS button on your router. 2.1 On Stockholm: Press and hold the CONNECT button until the status indicator flashes YELLOW rapidly and then release the CONNECT button. 2.2 With the remote: Press and hold the CONNECT button until the status indicator flashes YELLOW rapidly and then release the CONNECT button. 3. When the status indicator on Stockholm turns solid WHITE, the connection is established.
PLAYBACK THROUGH Wi-Fi Connect your playback device and Stockholm to the same Wi-Fi network - and playback is simple, choose Stockholm as sound device or renderer on your playback device. For iOS device just press the AirPlay logo and choose Stockholm. Using iTunes on a MAC/PC, you can stream music through your preferred network to multiple Vifa Stockholms simultaneously. You can even remote control iTunes with a free Apple remote app.
WIRED CONNECTION Connect Aux optical and analog input; MP3 players, media streamer or TV USB / iOS device • On the rear of Stockholm, the 3.5 mm mini-jack auxiliary input will support both an analog signal and an optical input with a digital data stream up to 24bit/192kHz. TO LOCK ON TO WIRED INPUT A1. On Stockholm: Press and hold the CONNECT button, until the status indicator flashes rapidly GREEN and then release. A2.
RESET AND SET TO FACTORY DEFAULT Connect Reset Power RESET - MAY BE USED IF STOCKHOLM FREEZES To reset Stockholm, briefly press the reset button - no user settings will be lost. FACTORY DEFAULT - RESETS STOCKHOLM’S SOFTWARE TO FACTORY SETTINGS To factory default Stockholm: press and hold the POWER and the CONNECT button simultaneously until the status indicator starts triple flashing WHITE.
THE VIFA APP To get the most out of your Vifa Stockholm, download the free Vifa app. You can find links to the app. under “support” on the Vifa website. The Vifa app allows you to: • Adjust the sound to your preferred taste or surroundings • Change the name that Stockholm will show on the Wi-Fi network • Change the network settings on Stockholm • Manage your inputs on Stockholm • Adjust the light intensity of the ”status indicator” www.vifa.
PRODUCT CARE This product is designed for premium music performance in normal living space. Exposure to rain, moisture, high humidity or sources of heat may damage the product. The intended use is within a temperature range of 5 - 40 °C (40 - 105 °F). CLEANING Your Vifa product is covered by beautiful highly durable textile from Kvadrat. Remove non-greasy stains by carefully dabbing with a lint-free cloth or use a lint roller to remove lint from the textile.
TROUBLESHOOTING In the extreme case that Stockholm is pushed to overheating, the status indicator lights RED constantly - please unplug the power cord and wait for approximately 5 min. before plugging in Stockholm and powering it up again. Here you can find further support on our Vifa products: www.vifa.
SPECIFICATIONS Description Wireless loudspeaker Technical features Bluetooth aptX Wi-Fi Direct Apple AirPlay Works with DLNA DSP signal processing Force Balanced Woofers Digital pure path amplifiers Drive units Tweeter 2 X 28 mm Vifa drive units with soft dome and neodymium magnet. Midrange 2 X 80 mm Vifa drive units with aluminium cone and neodymium magnet. Woofer 4 X 100 mm Vifa drive units with flat sandwich cone and neodymium magnet.
REGISTER AND TRADEMARKS We encourage you to register your product at: www.vifa.dk/register A Vifa product is in compliance with directives of relevance, including RoHS directive – see product label for more regional regulatory approvals.
The Wi-Fi Certified Logo is a certification mark of the Wi-Fi Alliance. The Bluetooth logo, the Bluetooth name and the combination are trademarks owned by Bluetooth SIG Inc. © 2013 CSR pic and its group companies. The aptX® mark and the aptX logo are trade marks of CSR pic or one of its group companies and may be registered in one or more jurisdictions.
2014 08 REV.2 For more information please visit our website at www.vifa.