User Guide WII Wireless Hunch Adapter Introduction Before operating the Wireless Racing Wheel, please read this Manual thoroughly,and retain it for future reference. Unleash your Wil Remote & Hunch. . .Go Wireless! Transform your existing Wii Remote and Hunch into wireless gaming weapons This Wireless Hunch Kit allows you to play your favorite Wii games without being limited by the Remote-to-Hunch cable.
Setup + Remove the top cover and battery compartment cover of the Wireless Hunch Housing, Connect the Hunch plug to the Wireless Hunch Housing following the below photo instruction. « Properly mount the Hunch into the Hunch shell of the Wireless Hunch Housing and insert the top cover. « Insert 2 AAA batteries into the battery compartment of Wireless Hunch Housing observing the correct polarity Insert and close the battery compartment cover.
Connection Turn on WII console, sync the Wii mote. Simply snap the wireless receiver to the bottom of the Wii mote Signal Lock Indicator on receiver begin to flash. Press CONNECT button on Wireless Hunch Housing, the CONNECT LED begins flashing. The connection is established automatically and your Wireless Hunch Adapter is functional. You can continually press button C and button Z, the Signal Lock Indicator will illuminate implying the connection is established.
» CONNECT LED FLASHES 10 seconds, then off The connection with the receiver failed or was interrupted. Enter sleep mode « CONNECT LED Offing Wireless Hunch Adapter is off + CONNECT LED FLASHES quickly 30 seconds, then off The connector is rot connected to the Wireless Hunch Housing + CONNECT LED FLASHES quickly and continuously Your Wireless Hunch Adapters batteries are weak. User Manual information: FCC Part 1 n 15.