R TE EN C C DO N HE IS ZH CRANE 2 User Guide V1.
桂林智神信息技术有限公司 ZH IS HE N DO C C EN TE R
ZH IS HE N DO C C EN TE R Contents Packing List 1 Disclaimer and Warning 2 Get to Know CRANE 2 7 Preparing and Charging the Batteries 8 Installation 10 Balance Adjustment 13 How to Use 16 APP Operations 23 Calibration and Firmware Upgrade 25 Usage of Main Accessories 29 Parameter Specifications 33 Warranty Terms 34 Contact Card 36
Packing List Disclaimer and Warning Thank you for using ZHIYUN CRANE 2. The information contains herein affects your safety and your legal rights and responsibilities. Read this entire document carefully to ensure proper configuration before use. Failure to read and follow the instructions and warnings herein may result in serious injury to you or bystanders, or damage to your device or property. The product package comes with the following items.
Disclaimer and Warning Disclaimer and Warning Warning ZH IS 1.CRANE 2 is a high-precision control device. Damage may be caused to CRANE 2 if it is dropped or subject to external force, and this may result in malfunction. 2.Make sure the rotation of the gimbal axes is not blocked by external force when CRANE 2 is turned on. 3.CRANE 2 is not waterproof. Prevent contacts of any kind of liquid or cleaner with CRANE 2. It is recommended to use dry cloth for cleaning. 4.
Disclaimer and Warning Disclaimer and Warning DO C C EN TE Battery Disposal Dispose of the battery in specific recycling boxes only after a complete discharge. Do not put away the battery in regular trash containers. Strictly follow your local regulations regarding the disposal and recycling of batteries. N Battery Charging 1.Do not attach the batteries to a wall outlet or car charger socket directly. Always use a ZHIYUN approved adapter for charging.
Preparing and Charging the Batteries Get to Know CRANE 2 For the first use of Crane 2, please use the dedicated charging device contained in the package to fully charge and activate the batteries to ensure the normal use of the product.
Installation Preparing and Charging the Batteries Battery Installation Charging Procedure Unscrew the battery compartment and insert the three IMR 18650 batteries in the right direction (positive/negative end), then tighten the battery compartment. Power Outlet EN Adapter Power Outlet N Adapter Please use and charge batteries provided or approved by ZHIYUN only, in case of accidents.
Installation Installation Installing Camera Connecting Camera Control Cable In the case of Canon camera, connect the control cable to the port on the tilt motor axis with the Micro USB end, and then the other end to the left-side port on the camera. 1.Loosen the mounting plate thumb screw, press and hold the safety lock while sliding out the quick release plate (to the opposite direction of the arrow mark on it). ZH IS HE N 2.
5.开机与启动 Balance Adjustment Balance Adjustment The balance status of the stabilizer will greatly affect the run time. Please make sure the camera is properly mounted and balanced, other wise the stabilizer may fail to start or operate normally. Balance Adjustment on Tilt Axis Level Adjustment on Tilt Axis Loosen the thumb screw (rotate about 3 times); Adjust the tilt axis until the camera can stay still with the lens facing up (i.e.
How to Use Balance Adjustment Control Panel Description Balance Adjustment on Pan Axis Follow Focus Controller 11 Mode 1 OLED Display 2 Joystick 3 ON/OFF&Video Mode 15 zhiyun-tech.com IS ZH If the camera installed is too light that it's impossible to achieve balanced adjustment, please purchase the dedicated counter weight (100g) provided by ZHIYUN and install it under the camera mounting plate to finish balance installation.
How to Use How to Use Follow Focus Controller* Rotate the controller to adjust the focal length in real time and realize follow focus control. OLED Display Description Display screen for camera params setting Mode Press for 1 second to enter or exit standby mode. Single press to switch between pan-following and lock mode. Quick double press to enter the following mode.
How to Use How to Use Motor Force Adjustment Control Mode Description The motor force of the stabilizer needs to be adjusted (3 levels) to adapt the stabilizer to cameras and lens of different weight for ideal use. E E OD sM OD R sM es es pr le pr le ng Si ng Si TE EN E DO E OD C C sM OD Double pressMODE Single pressMODE Following Mode (F) Mode Switch Tilt Axis Tilt Axis HE N Tilt Axis IS ZH 2.
How to Use How to Use Bottom up Mode Operation DC 8.0 V Power Outlet Usage Bottom Up Mode The DC 8.0 V power outlet on the side of the stabilizer can be used for charging the Canon 5D camera through a DC connector DR-E6 ( purchase separately). Charging 5D3/5D4 camera: Powering on: 1.First, connect the power input end of the connector to the DC 8.0V power outlet, then connect the other end of the connector to the camera. 2.
APP Operations APP Operations Main Features of the APP APP Download and Installation B a s i c S e t t i n g S c re e n : Motor force setting and camera brand selection. Control Screen: Stabilizer control panel via Bluetooth. Calibration Screen: Calibration is required when deviations are found in the 3 axes and the leveling of the c a m e r a . Ta p " S t a r t Calibration", and complete the 6-side c a l i b r a t i o n p ro c e d u re following onscreen illustrations.
Calibration and Firmware Upgrade Calibration and Firmware Upgrade When do you need to calibrate the stabilizer? Six-side calibration Please calibrate the stabilizer when necessary to ensure normal use. How 1.Power on the stabilizer and enter the standby mode, press menu, rotate the dial to “calibration” option, press Right to enter the option. 2.As seen below, conduct the six-side calibration following the 6 steps shown in the graphs, finish by pressing any button to exit the menu.
5.开机与启动 Calibration and Firmware Upgrade STEP 4 Calibration and Firmware Upgrade Motor fine-tuning Fine tune the motor through stabilizer: Power on the stabilizer and enter standby mode, then rotate the dial and press right to enter the “angle” option; Adjust the value of the tilt and roll axis angle to your actual needs.
Usage of Main Accessories Usage of Main Accessories Crane-EH002 CRANE 2 Extended Handle (purchase separately) Top down gesture Bottom up gesture ZH IS HE N DO C C EN TE R Installation method: 1.Insert in the two handles from the two sides of the horizontal rod. 2.Tighten the screws on the handles. 3.Loosen the screws on the fixing clamp to install the stabilizer, then tighten the screw to fix it. 29 zhiyun-tech.com Clip the fixing clamp onto the stabilizer at the position indicated.
Usage of Main Accessories Usage of Main Accessories Basic Specifications: Charging voltage: 5V Charging current: 100mA Theoretical work time: ≥30 hr. Built-in Polymer lithium batter y capacity: 150mAh Emission and received current: 11.9mA Operating current: 4.2mA Effective control distance: 10M (without blockage) ZW-B02 Remote Controller R Charging Indicator TE MODE Button Toggle Charging Indicator Charging: ●RED light. Charging complete:●GREEN light.
Parameter Specifications Warranty Terms Product model: CRA02 12.6V 40°C 18h 2.5h Weight Well balanced with camera mounted Charging current 2400mA 1250g -135° R 25°C 12h Charging Time Tilt Angle Range 6000mA Excluding batteries +185° 360° Unlimited rotation Pan Angle Range 360° Unlimited rotation ±0.01° ±0.03° Following Deviation in Motion State ±0.05° ±0.1° 500g 3200g Compatible Camera Sizes Product Dimension 33 zhiyun-tech.
Contact Card ZH IS HE N DO C C EN TE R Warranty Terms 35 zhiyun-tech.com zhiyun-tech.
EN TE R 合格证 FCC statements: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference causedby unauthorized modifications or changes to this equipment.
