Intelligent Gimbal for Camera Instructions EN V1.
Catalogue 1. Overview… ………………………………………………………… 2 2. Start to Use… ……………………………………………………… 4 2.1 Charging……………………………………………………………………… 2.2 Unlock/Lock… ………………………………………………………………… 2.3 Battery Installation… ………………………………………………………… 2.4 Camera Installation and Balance… ………………………………………… 2.5 Power On/Off… ……………………………………………………………… 4 5 5 6 8 3.1 Function/Modes Introduction… …………………………………………… 3.2 Function Operation of Remote Control… ………………………………… 3.3 Remote Control Touch Screen… …………………………………………… 3.
QING is a professional gimbal for DSLR/mirrorless camera. It is compatible with popular DSLR camera on the market. It is available to install on the tripod or other carrier to extend its shooting function. It has a oversized touch screen on remote control, allows users to switch work modes, control rotating direction and set up parameters on it directly and visibly. Users can also control camera's follow focus and zooming after connecting camera to QING via cable.
1. Overview * The product is NOT included the camera. www.feiyu-tech.
www.feiyu-tech.
2. Start to Use TIPS · Please install the camera and balance it before power on the gimbal. · Please do not touch tilt motor and gears to avoid gripping. · When the battery is low, please charge the battery. · When not in use, power off the gimbal and then remove the batteries. 2.1 Charging Please fully charge the dedicated battery before power on the gimbal for the first time. Please choose the suitable charger when quickly charging. 2.1.1 Charging for the Gimbal Using USB2.
2.1.2 Charging for the Remote Control Using USB2.0 to Micro cable to charge the remote control, support 5V/3A input. 2.2 Unlock/Lock There is a position lock on the tilt axis, which is convenient for locking the position, installation, storage. Unlock the gimbal before powering on it. 2.3 Battery Installation Please fully charge the dedicated battery before power on the gimbal for the first time.
② ① 2.4 Camera Installation and Balance TIPS · Make sure the battery and memory card are loaded before camera installation. · Before balancing the gimbal, the lens cover should be removed from the camera and the memory card needs to be inserted to the camera to complete all the cable connections to ensure that the camera is ready for shooting. · During balancing the gimbal, make sure the camera is power off and the gimbal is turned off.
Step 2: Mount camera on ARCA quick release plate ②, and tighten it. Step 3: Install the ARCA quick release plate on the quick release plate, and tighten the ARCA quick release plate safety lock ③. Install the lens support frame ④ and tighten the thumb screw ⑤ to hold the lens firmly. Step 4: Unlock the position lock ①, and loose the thumb screw ⑥. Slide the slide arm ⑦ to balance, and tighten the thumb screw ⑥ after the balancing is completed.
2.5 Power On/Off Please release the tilt motor lock before powering on. Please do not touch tilt motor and gears to avoid gripping. Steps: (1) Gimbal: Install the dedicated battery and long press the power button and release it when the battery indicator and function indicator turn on together and hear the tone. Long press again to power off. (2) Remote Control: Long press the power button, release it when the touch screen shows Long press again to power off. . www.feiyu-tech.
3. Function & Operation 3.1 Function/Modes Introduction ① Pan Mode (Default mode) When attached on the other equipment, the tilt direction is fixed, and the camera direction moves according to the rotation of the equipment. ② Lock Mode When attached on the other equipment, the tilt direction is fixed, the camera direction doesn't move while rotating the equipment. ③ Reset Reset to Pan mode, tilt and pan axis reset to initial position. www.feiyu-tech.
④ Time-lapse photography User can set the start and stop shooting route on remote control, QING will auto rotate according the setting. Refer to P17 3.4.1. TIPS: a. After click "Start" under time-lapse mode, gimbal will record all the movements before it stop. Do not repeat unnecessary actions during time-lapse. b. The parameter a/b fps indicates how long the video will be play under the condition you set below.
⑥ Wide Angle For grand scenes or special scenes, the gimbal supports wide angle shooting ( 9 square panorama) can be assemble into 1 picture later on computer or Feiyu ON App. Refer to P19 3.4.3. ⑦ Pan Shoot Gimbal will rotate precisely (pan rotate 180°or 360° for panorama) and take pictures according to the setting. Refer to P19 3.4.4. Take 180° for instance: www.feiyu-tech.
To get more videography skills with gimbal and it's tutorial, please kindly visit our official of Remote Control or download Feiyu ON App. http://www.feiyu-tech.com 3.2 Function Operation of Remote Control 3.2.1 Power Button Operation Function Button Operation Power Button Function 1. Remote control power ON/OFF 2. Lock/unlock screen 3. Return to home page Instruction Long press (Long press the power button, and release it when it shows " " on display.
3.2.3 Turntable Operation Function Button Operation Turntable Function 1.Control the movements on pan axis 2. Adjust the parameter Instruction Rotate the turntable Rotate the turntable 3.2.4 Capturing/Recording Button Operation After QING connecting control cable with camera，Remote Control can directly control picture-taking , video recording, follow focus. Function Button Operation Capturing/Recording button(2-stage way, half-way press and fully press) Function Instruction 1.
3.2.5 Knob Operation Function Button Operation Knob Function 1. Control the movements on tilt axis 2. Select the setting 3.2.6 Function Button Operation Function Button Operation Function Button Instruction Rotate clockwise or anticlockwise Rotate clockwise or anticlockwise Function Switch sensitivity: fast/low Instruction Switch control object: tilt axis/optional object* Single tap Double tap *select electronic follow focus, electronic zoom, AKFⅡ in control object setting in the second screen.
3.2.7 Power Button Operation Function Button Operation Power Button Function Power on/off Customize initial position* 操作说明 Long press and release Double tap NOTE : The battery should be installed before using. The default angle for tilt and pan axis is 0°, user can customize the initial position by rotate the turntable and knob. (To reset to default angle please rotate the turntable and knob to the position the image shows below and double tap the Power button). www.feiyu-tech.
3.3 Remote Control Touch Screen 3.3.1 Touch Screen Display icon Mode / Status Display icon Mode / Status Gimbal Connected MODE Current Mode Battery Level of Remote Control LK Lock Mode Gimbal Disconnected USB Camera Connected USB Camera Disconnected Lock Status Unlocked Status Battery Level Control-Follow Focus Control-Zoom In/Out HF Tilt Pan Pan Mode Tilt Axis Pan Axis High Sensitivity Low Sensitivity Control-Brushless Follow Focus Control-Gimbal Tilt Axis www.feiyu-tech.
3.3.2 Display Screen Switching Switch screen by sliding left and right. 3.3.3 Touch Screen Common Gesture Operation Slide to left: Switch to left screen Slide to right: Switch to right screen/back to previous page Click: Check this option 3.3.4 Lock and Unlock 3.4 Modes Setting Slide right to left Slide left to right Tap to select current menu 3.4.
(2) For the first time, please set up all the time parameters at Time Set menu, including movements time on pan, tilt axis, interval time and stop time for long exposure of photography. (3) Enter Rotate Set menu, use the knob and the turntable to control the path of lens, record start and end points of path. (4) Click Start to go to auto timelapse photography, the gimbal will show up remaining time , current and total number of photos. Please wait for completion by itself. 3.4.
(3) Tag direction icon or , to start to rotate, tag again to stop. Once got settings set up, simply tag the trigger button to re-control the pan/tilt via turntable and knob. 3.4.3 Wide Angle Slide to right to enter reverse screen, tag to enter the Wide Angle interface, as the picture shows: Once setting done, simply tag the trigger button to re-control the pan/tilt via turntable and knob. 3.4.
3.4.5 Sensitivity Setting Once setting done, simply tag the trigger button to re-control the pan/tilt via turntable and knob. 3.4.6 Control Object Setting Use the touch screen to switch. Refer to P15 3.2.6. Control the gimbal Zoom 3.4.7 Motor Power Setting Follow focus Control the non-brush follow focus Scroll the left knob to select auto/customize, and scroll the turntable under the display to adjust the custom force.
3.4.8 Gimbal Calibration Setting 3.4.9 Remote Matching Settings 3.4.10 Language Settings 3.4.11 About the Gimbal Introduction about the firmware version of the device. 3.5 Gimbal Initialization You can initialize your gimbal when: a. When camera is not balance level. b. If not use for a long period of time. c. In case of extreme temperature variations. www.feiyu-tech.
Gimbal calibration step: (1) put the gimbal on the horizontal table. (2) Select "gimbal calibration" on the remote control (see P21 3.4.8). During the calibration, the tilt will sag gently. (3) After the calibration is successful, the gimbal will be gently raised to the horizontal state. 4. Accessories 4.1 Brushless Follow Focus (AKF II) ① Fix the lens gear to the camera's focus ring position.
4.2 Wireless MIC Kit The receiver transmitter can collect the sound from the transmitter within 20m range. 4.2.1 How to Use (1) Manually set video mode on camera. (2) Plug in the wireless microphone (receiver terminal) to camera MIC jack. Turn it on. (3) Turn on the wireless microphone (transmitter terminal), it is available to use. (To get a better effectiveness, please wear it as close to the sound source as possible.) www.feiyu-tech.
(4) Plug the wireless clip-on microphone in the wireless microphone ( transmitter terminal) mount. 4.2.2 Wireless microphone kit is available to use individually. 4.2.3 The indicator description of wireless microphone kit * Workable for both receiver and transmitter terminal.
5. Specifications Product Dimensions 134mm×157mm×133mm Max. Panning Range 360° Max. Tilting Range Tilting Speed Panning Speed Theoretical Battery Life for Gimbal Weight Payload Adapted cameras 120° 8°/s ~ 140°/s 12°/s ~ 165°/s 5.5h Gimbal 1340g ( Including Battery ) Remote Control 316g ( Including Battery ) 3500g ( After Balancing ) www.feiyu-tech.
Compatible Cameras for Reference Brand QING Lens Compatible List Brand Camera(H/W/D） Model Can be equipped with a lens √ FE 16-35mm F2.8 GM Φ89mm×122mm 680g √ √ √ √ √ × √ √ √ × √ √ √ √ √ × Φ64mm×60mm 200g √ √ Φ64.8mm×73.3mm 265g √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ Φ64mm×60mm 200g √ √ Φ64.8mm×73.
Brand Brand Camera(H/W/D） EOS R 佳能 EOS RP QING Lens Compatible List Model 佳能 Lens size & weight (Φ×L） Camera Brushless follow focus + Camera EF-S 18-200mm f/3.5-5.6 IS Φ78.6mm×102mm 595g √ √ EF 50mm f/1.4 DG HSM Art Φ85mm×100mm 815g √ √ √ √ √ √ EF 24-70mm f/4L IS USM RF 28-70mm F2L USM RF 24-105mm F4L IS USM EF 70-200mm f/2.8L IS III USM 5D MarkIV 5D MarkIII 6D MarkII 6D 80D EOSR Can be equipped with a lens Φ83.4mm×93mm 600g Φ103.8mm×139.8mm 1430g Φ83.5mm×107.3mm 670g 1.
Disclaimer Thanks for using FeiyuTech product. The information in this document affects your safety and your legal rights and responsibilities. Read the entire document carefully to ensure proper configuration before use, Failure to read and follow instructions and warnings in this document may result in serious injury to yourself or others, or damage to your products or damage to other objects in the vicinity.
3. Please storage the battery in dry environment. 4. DO NOT overcharge or overuse the battery, otherwise it will cause damage to the battery core. 5. Never use the product when the temperature is too high or too low. 6. For the product with removable batteries, please take out batteries if you don't use it for a long time. Battery Safety Guidelines 1. To avoid fire, serious injury, and property damage, observe the following safety guidelines when using, charging or storing the battery.
www.feiyu-tech.
FCC regulatory conformance： This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
