User Manual V1.
CONTENTS I Product Overview II How to use Summon EN 1 2 1. Function introduction of buttons and ports 2 2. Camera menu introduction 3 3. Introduction of photographing and shooting 6 4. Introduction of operating mode 6 5. LED indicator instructions 7 6. Reverse shooting 7 7. Firmware upgrade 7 8. Charging mode 8 9. Initialization 8 10.
Product Overview I Product Overview Summon is a controllable all-in-one camera with 3-axis stabilization function. It has simple and elegant structure and is easy to operate, the photographing and shooting are controllable so as to take stable HD videos and pictures. It has realized some functions including fixed point shooting, following shooting and time-lapse photography.
How to use Summon II How to use Summon Power on: Long press the function button until the green light up, then release it to turn on the gimbal. Power off: Long press the function button until the red light always on, then release it to turn off the gimbal. 1 Install battery Remove the hand shank and insert one 22650 battery into it. 2 ! Power on / off The function button can control power on or power off.
How to use Summon Joystick Control the orientation of camera lens Control camera menu * Joystick Camera lens Joystick Camera menu Up Down Up Upward selection Down Up Down Downward selection Left Left Left Return to the previous menu / Exit Right Right Right Access the next menu / Confirm * Triple tap function button to access camera menu, the joystick can set the camera menu at this moment. Function button Switch working mode or access camera menu.
How to use Summon Only display in Video mode Menu introduction Media Playback VIDEO Only display in Photo mode Play back recorded videos JPG Check the pictures Joystick VIDEO JPG Up Check the previous video Check the previous picture Down Check the next video Check the next picture To the left Return to menu Return to menu To the right Play videos Check picture information Under the "VIDEO" or "JPG" option, click the " Photo / Video switchover button" enter the delete menu, you can cho
How to use Summon Photo Burst Only display in Photo mode. 3 / 5 / 10 pictures are settable for continuous shooting, factory default setting is Off. Press Shutter botton for continuous shooting after setting. Timelapse Open the timelapse function and set the internal time for shooting two adjacent photos. You can choose from 3 sec / 5 sec / 10 sec / 30 sec /1 min / Off. Factory default setting is Off. Timelapse Duration Set the shooting time of time-lapse photography.
How to use Summon 3. Introduction of photographing and shooting Photo / Video switchover button Photographing Switch to Photo mode by “Photo / Video switchover button”. Single tap “Shutter”button to photograph. Special modes: Photo Burst / Scheduled picture Shutter Shooting Switch to Video mode by “Photo / Video switchover button”. Single tap “Shutter” button to start recording and press this button again to stop recording.
How to use Summon 5. LED indicator instructions Color Flashes Mode / Status Blue Single Panning mode Blue Double Panning and Tilting mode Blue Triple Standby Blue Always on Lock mode / Initializing Blue Quickly Initialization failure / Malfunction Indicator 6. Inversion shooting Turn the hand shank to the upward side of camera to realize the inversion for shooting in the scenes with low angle. 7. Firmware upgrade Micro port Upgrade........
How to use Summon 8. Charging Micro port USB data cable 5V USB power adapter (Equipped by user ) USB port After power off, connect the USB data cable to USB port, and connect with 5V USB power adapter by USB cable (equipped by user). Or take out the battery, and use the corresponding charger to charge the battery (equipped by user). The red indicator light is on during charging, and green light is on after the battery is fully charged. 9.
How to use Summon (3)To select “Timelapse”, turn the joystick to the right to access this interface, you can set the interval time of continuous pictures taken by time-lapse photography. For example, you can set it as 5 seconds. Turn the joystick to the right to save, and return to the previous menu.
III Product Parameters 97 mm 81 mm 232 mm 143 mm Weight: 350g (Not including battery) Tilting angle range 310° Maximum control speed ±120°/s Rolling angle range 310° Battery model 22650 Panning angle range 360° Working voltage 3.7V ~ 4.2V Graph sensor 16 mega pixels Lens field angle 95° Lens specification 1 / 2.3” Aperture Size f 2.8 Display screen 2.0 inch / 4:3, ISO 50~3200 , Automatic Resolution: 320x240 4K@25FPS / 4K@15FPS / 2.7K@30FPS / 2.
Package List Name Quantity Name Quantity Summon 1 Lens filter cap 1 22650 rechargeable battery 1 User manual 1 USB cable (micro port, 50cm) 1 Warranty card 1 DISCLAIMER Prohibit any user for any illegal purpose. Users will be responsible for all behaviors of purchase and use products. The Company assumes no liability for any risks related to or resulting from the debug and use of this product (including the direct, indirect or third-party losses).
Create More Possibilities For more information, please visit our official website www.feiyu-tech.com Support Email: service@feiyu-tech.com www.feiyu-tech.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.