[GUIDER 800Z Product Description Manual] 1
cat a l o g u e 1. product presentation ........................................................................................ 5 2. usage method ................................................................................................... 11 1 basic operation ........................................................................................ 11 2 factory data reset ....................................................................................12 3 charge ...................................
2.6ECG ......................................................................................................25 2.7 Respiratory training ...................................................................... 27 3 Remind function ........................................................................................28 3.1 Alarm clock reminder ................................................................... 28 3.2 Message (newsletters, calls, other applications) reminder29 3.
5.1 Take photos ..................................................................................... 37 5.2 Female function ............................................................................. 38 5.3 Reset the password .......................................................................41 5.4 Switch setting ................................................................................. 43 4. App ..................................................................................................
一、 product presentation This watch is a healthy and smart watch that integrates exercise data collection, PPG pulse rate, physiological sleep monitoring, ECG ECG measurement, and blood oxygen monitoring. Users can monitor the body state, adjust the work and rest, and cultivate a healthy lifestyle. The watch can be matched with our client App "800Z", personalized Settings, synchronous data. In addition, the watch also has information push, alarm clock reminder and other functions.
Call rejection, silent Connect Bluetooth, can reject, mute Open the code meter on the watch stopwatch for timing On the watch operation to open the calculagraph countdown for timing Viate the phone by operating the Find the phone watch Ten movement modes are selected to make the movement data more Multi-movement mode accurate.
Support for immediate measurement and continuous blood oxygen monitoring of blood oxygen at night Support the ECG measurement, and the mobile phone measurement ECG electrocardio can display the instant waveform and save the report Follow the continuous night blood HRV oxygen monitoring function Help users to take deep breaths to respiratory training relieve pressure Set the labeled alarm clock, to the The alarm clock to remind point time reminder Brief message / other Support mobile phone information applic
reminder reminder Mobile phone set the heart rate Heart rate alarm alert upper limit, watch instant reminder Mobile phone set up sedentary Sedentary reminder time, to the point to remind The phone sets motion goals, goals Reminder of movement achieved, and the watch vibrates goals achieved and displays goals achieved Mobile phone and watch binding, Binding equipment synchronous upload information Check whether the wearing is Wear the test correct, and detect the accurate measurement data Set the turn wri
and experience effect is better A variety of main interface styles for Main interface style setting users to choose from Open the no-disturb mode, the Disturbance mode device will not remind the user of functional vibration Hand ring control the phone to take take a picture photos, photos are automatically saved According to user Settings, intelligently push health Female function suggestions to protect women's physical health Can set "blood oxygen night monitoring" "automatic heart rate switching syste
Support language Support language wrist strap Traditional Chinese, English, simplified Chinese.
二、 usage method 1 basic operation Power on: off, press the side key for 3 seconds, the watch vibrate and display the "main interface" of the watch. See Figure 2-1-1. Key operation: slide left and right to switch the watch interface, slide right to return to the upper interface. If there is a subinterface, click the diagram to enter. Function selection interface: the user switches to the function interface and selects the function required to operate.
graph 2-1-1 graph 2-1-2 graph 2-1-3 2 factory data reset Users can clear the watch data and restore the watch factory Settings. operation declaration App terminal: turn on "800Z", "Connect device", "My Device" and "Data:" Clear ". After operation, the watch will clear all data and set all function switches to the preset value.
graph 2-1-4 graph 2-1-5 graph 2-1-6 3 charge When the power is too low, the watch vibrates to display the "low power" interface (Figure 2-1-7). After the shutdown, the charging is automatically turned on. During the charging process, the "charging animation" is displayed (as shown in Figure 2-1-8), and the interface surface cannot be switched over.
5 Equipment information This device information can be viewed on the device. operation declaration Click the screen to slide the screen (press the side key again to enter) click "System Settings" to view the device information. 三、 Product function introduction and operation instructions 1 Timed function 1.1 stopwatch "stopwatch" interface display time, minutes, seconds, "Start / pause" and "Reset" diagram (Figure 3-1-1).
operation declaration Click the side key, click again, click the side key to select "code table", click "Start" to keep time, and click again to pause. You can also click the "Continue" graphic to retime. .
Click the side key, click again, click the side key click "timer" set time for countdown. .21 Looking for a mobile phone When the phone App is connected to the device, users can find the phone through the "Find the phone" function. After clicking "Find the phone", the device enters the search countdown stage (Figure 3-1-5), click "Cancel" or swipe right to stop searching. After the countdown completes, the "ringing" interface (Figure 3-1-6), and the phone vibrates and rings the bell.
2 Health-related functions 2.1 Multi-sport mode Sports modes include 10 kinds of outdoor running, indoor running, outdoor walking, indoor walking, indoor cycling, indoor cycling, hiking, stepping machine, elliptical machine and rowing machine, as shown in Figure 3-2-1. The above exercise mode can record the user's heart rate, calories, and exercise time, midway can "pause / continue" or "exit".
Data storage The watch only keeps the last 3 sports data. operation declaration Enter: Click the side button and press the side button again to enter "Movement" (see Figure 3-2-2), slide and select "Movement mode" (see Figure 3-2-1). Pause / Continue: Enter the Movement interface (Figure 3-2-3), slide left and click "ause / Continue" to pause / continue (Figure 3-2-4).
graph 3-2-3 graph 3-2-5 .22 Step counting, distance, calories The "step" interface shows the total steps, distances and calories (Figure 3-2-6). Daily 0:00 clear, users can connect to the App to upload all data. operation declaration Click the side key to slide right to enter "step" (or press the side key again to enter "step").
.32 Sleep The "sleep" interface shows the total and deep duration of sleep (Figure 3-2-7). The App end displays detailed sleep data, including sleep quality, sleep duration, wake duration, sleep duration, wake duration, deep sleep duration, shallow sleep duration, and deep sleep duration (Figure 3-2-8) operation declaration Device side: Click the side key to slide right to "Sleep" (or press the side key again to "Sleep").
The Heart Rate interface shows the user's last manual measurement record, the highest and lowest automatic monitoring values, and the 24-hour heart rate scatter chart (Figure 3-2-9). graph 3-2-9 operation declaration Click the side key to slide right to enter the "heart rate" (or press the side key again, click the "heart rate") Heart rate (PPG pulse rate) monitoring: turn on the "automatic heart rate monitoring" in the watch or the App setting, and the watch detects it every 10 minutes.
App terminal: open "800Z" connected device click "My device" click "Switch" set "click" Heart rate automatic monitoring " switch Abnormal heart rate (PPG pulse rate): When the device end automatically monitors that the user's heart rate is abnormal, it shows that the "heart rate is abnormal" (see Figure 3-2-11). The App end can set the "heart rate alarm" switch and the alarm threshold, and the device end can only set the "heart rate alarm" switch.
graph 3-2-12 .52 Blood oxygen After entering the "blood oxygen" interface, the detection automatically begins, and the blood oxygen level is displayed during the process (Figure 3-2-13). If the detection fails, the "detection failure" interface is displayed (Figure 3-2-14). graph 3-2-13 graph 3-2-14 data display Device end: the interface displays the instant detection results. App end: blood oxygen and apnea data and distribution.
Manual detection: App terminal: open the "800Z" connection device, click the "data panel", click the "more operations", click the "Blood oxygen"; Device side: click side key, click again, click side key click "blood oxygen". Automatic monitoring: turn on the "blood oxygen night monitoring" in the watch or App. The device side data is cleared at 0 o'clock on the same day, and users can connect to the App to upload all the data.
2.6ECG After entering the "ECG" interface, click "Start" to enter the countdown time before detection. After touching the wrist and finger electrode within 3s, show the progress during detection (Figure 3-2-17), and display the results after completion (Figure 3-2-18). If the test fails or is not worn correctly, the device is displayed (Figure 3-2-19). graph 3-2-18 graph 3-2-17 graph 3-2-19 data display Device end: the interface shows the last test result and test time (Figure 3-2-20).
graph 3-2-20 operation declaration Manual detection: App terminal: open the "800Z" connection device, click "data panel", click "more operations", click "ECG"; Device side: click side key, click again, click side key click "ECG" click "Start" wear detection to start measurement.
Device end: long press the side button for 3 seconds, the watch screen appears in emergency ECG mode, click "Emergency ECG", click "Start", wear detection to start measurement. Save the data to the APP. .72 Respiratory training Users can turn on the "breathing training" on the device end (Figure 3-2-21). operation declaration Click the side key, click again, click the side key and click "breathing training" to select the training time and click "Start" (see Figure 3-2-22).
graph 3-2-21 graph 3-2-22 3 Remind function .13 Alarm clock reminder In the App terminal connected device state, the user can set the alarm clock on the App end (up to 20 sets of alarm clocks). Open the unexpired alarm clock at the device end (Figure 3-3-2). graph 3-3-2 operation declaration Set alarm clock: Open the "800Z" connected device, click "My device", click "Alarm clock setting", click "+" diagram to set up.
Turn off / delete the alarm clock: Open the "800Z" connection device and click "My device" and click "Alarm clock Set", left-swipe the alarm clock (or click the alarm clock and click "Remove the alarm clock"). .23 Messages (newsletters, phone calls, other applications) reminders When the device is connected to the mobile App, the device will receive SMS, call and application messages (including wechat, QQ, Twitter, Facebook, Instagram and other common applications).
.33. Bluetooth Disconnect reminder Users can set a Bluetooth "disconnection reminder" on the device side or the App side. On the device master interface, slide down to view the Bluetooth connection status. When Bluetooth is disconnected, the watch vibrates and displays "Bluetooth off" (Figure 3-3-5). graph 3-3-5 operation declaration Equipment side: see "Switch Settings" below.
App end can set the reminder period and reminder interval (Figure 3-3-6). When the device detects that the user moves small during the reminder interval, it will vibrate and display the "sedentary reminder" (Figure 3-3-7). graph 3-3-6 graph 3-3-7 operation declaration Equipment side: see "Switch Settings" below. App terminal: open "800Z" connected device click "My device" click "Sedentary reminder" Set "Start time" "End time" "How long reminder" click "Save". .53.
graph 3-3-9 operation declaration Open "800Z" connection device click "My" click "movement target" set value click "Save". 4 Conventional function .14 Binding equipment Users can turn on the "binding device" on the App side. When turned on, users can upload and synchronize the data to the App terminal. If the user logs in without an account on the App terminal, the data will be kept in the device locally. If the user logs in with the account, the data will be uploaded to the App.
.24 Wear the test When the user tests the heart rate, ECG, etc., the device will detect whether the device is worn correctly. Testing can be performed correctly and the results will be displayed if worn correctly, or if not worn correctly with "test failure" (Figure 3-4-2). graph 3-4-2 .34 Turn the wrist bright screen Users can set "wrist display" on the device and App.
Equipment side: see "Switch Settings" below. App terminal: open "800Z" connected device click "My device" click "wrist lifting display" set "Start time" "End time" "wrist lifting sensitivity" click "Store". .44 Bright screen length, screen brightness You can set "screen pass time" on the device and the App end or adjust "screen brightness" on the device end (Figure 3-4-4).
graph 3-4-4 .54. Dial setting Users can perform "dial setting" on the App side. operation declaration Open the "800Z" connection device, click "My device" and click "Dial Settings". .64 Health and monitoring Users can set up the basic health functions at the device end (Figure 3-4-6). operation declaration Click the side button, click again, click "Set" and click "Health and Monitoring".
graph 3-4-6 .74 Language system setting Users can set the device language on the device side (Figure 3-4-7). operation declaration Click the side key, click again, click the side key, click "Settings", click "Language System Set". graph 3-4-7 .84 Silent mode If the mute mode is turned on, the device will not remind the user of the vibration (Figure 3-4-8).
operation declaration Click the side button "Main interface" to slide down and click "Silent mode" to select whether to open "silent mode". graph 3-4-8 5 Other functions .15 Take photos When the device is connected to the App, the "photo" function can be activated in the App and controlled by clicking on the device screen (Figure 3-5-1).
iOS: Open the "800Z" connection device click "My device" App terminal click "photo" device terminal display "photo" click the device screen for control. graph 3-5-1 .25 Female function This feature is mainly intended for female users. If the user sex is set to male, the App Data panel does not display the module. When the device is connected to the App, the female user can set a personal physiological state in the App. The App predicts and reminds the user status through the user data.
Only remember the menstrual period: users choose "only remember" menstrual period, to fill in the personal menstrual length, interval length, and the last menstrual time. According to the information provided by the user, the equipment predicts the current situation and the interface shows the words "safe period" and "XX days before the next menstruation".
Method: open the "800Z" connection device click "data panel" click "female" click "pencil" in the upper right corner click "Prepare for pregnancy" to fill in the data click "Save". graph 3-5-5 Pregnancy: female users choose "pregnancy", need to fill in their due date, the last menstrual time. According to the information provided by the user, the device predicts the user's current situation and the interface shows the words "XX days from the birth of the child".
The equipment predicts the user's current situation and interface to display the words "ovulation period X days", "safety period" and so on. Method: open "800Z" connection device click "data panel" click "female click" female "click" pencil "in the upper right corner click" Bao Ma period "fill in the data click" store ". Bracelet notice Open the "800Z" connection device, click "Data panel", click "Women" to set the "bracelet notification" switch. .
Open "800Z" connected device click "My device" click "Reset Password" enter "Old password" "New password" New password "click" Reset Password" 42
.45 Switch Settings The device end can set up the "broken line reminder", "lift wrist display" and "sedentary reminder" switch (Figure 3-5-14). operation declaration Click the side key, click again, click the side key click "Settings" click "Switch Set".
FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.