GB CN DE FR RU V1.0 202106 Quickstart Guide TN Series Thermal Imaging Cameras Thank you for choosing our product. Please thoroughly go through user manual before operation and keep it well for future reference. All photos here are for reference only. and specifications are subject to the physical product.
- CONTENT GB TN Series Thermal Imaging Cameras Quickstart Guide .......................................................
GB CN DE FR RU -IMPORTANTThank you for purchasing this product. Please read this Guide first and keep it properly for future reference. We hope this product will meet your expectations. This Guide is a general guide for a series of products, which means that the product you receive may differ from the description in the Guide. The actual product you receive shall prevail. This Guide is prepared to introduce our products to the users.
GB CN DE FR RU -RF exposure warningThe equipment complies with FCC RF exposure limits set forth for an uncontrolled environment. The equipment must not be co-located or operating in conjunction with any other antenna or transmitter.
GB CN DE FR RU -IMPORTANTDANGER 1) Please follow the method described in this Guide for charging the cell, and follow the charging procedures and precautions. Improper charging may cause overheating, damage and even personal injury. 2) Do not attempt to open or disassemble the cell at any time.If any liquid touches the eyes in case of cell leakage, please rinse with clean water immediately and seek medical care. WARNING 1) Please keep the device as stable as possible to avoid violent shaking.
GB CN DE FR RU 6) Do not disassemble the unit by yourself, which may cause damage to the device and loss of warranty rights. 7) Do not use soluble or similar liquid on the device and cables, which may cause damage to the device. 8) Please do not use the device in an environment with the temperature higher than the permitted level, which may cause damage to the device.
GB CN DE FR RU 11) Do not short-circuit the positive and negative terminals of the cell; 12) Do not place the cell in a humid environment or the water. NOTES 1) Do not expose the device to dust or moisture. When used in an environment with water, avoid splashing water on the device. The lens shall be covered when the device is not in use; 2) When this device is not used, please place the device and all accessories in the special packing box.
GB CN DE FR RU - LIST OF PARTS - PLUG 18650 CHARGER 18650 BATTERY X2 (INCLUDING BATTERY BOX) BAG (INCLUDING POWER ADAPTER MICRO HDMI CABLE SHOULDER STRAP) SHOULDER STRAP MICRO USB CABLE Options： REMOTE CONTROL 6 TYPE-C CABLE
GB CN DE FR RU - PRODUCT COMPONENTS This Guide is applicable to many models of this series, and only one model is shown in the figure.
GB CN DE FR 1. FOCUS RING RU After the thermal imaging camera is turned on, it shall be aimed at the target. When the distance between the observation target changes, the image may be blurred. Therefore, it is necessary to turn the lens focus ring to refocus until the target image is clear. 2. LENS COVER Please cover the lens to protect the lens when the product is not in use! 3. USB TYPE-C PORT The external port can be connected with the external power supply to supply power to the product.
GB CN DE FR RU 5. CELL COVER Open the cell cover as shown and insert the cell. NOTE: please insert the cell in the direction shown in the figure, and do not push the cell forcibly.
GB CN DE FR RU - QUICKSTART INSTRUCTIONS Button Power button Shutter button Ranging button Menu button Upper button Lower button 10 Current device status Press Long Press Power on Compensation Display off/off Power off / Power on Display off Display on Display on Take photos Video recording / / Menu bar not shown Menu bar display Turn on the Menu bar not / distance shown function Turn on the Menu bar / distance display function Menu bar not Open shortcut Open Main shown menu Me
【BUTTON DESCRIPTION】 GB CN DE FR RU BUTTON DESCRIPTION 1. POWER BUTTON POWER ON: Long press and hold the power button until the startup picture appears in the eyepiece, then the device can be turned on successfully. POWER OFF: a. Manual power-off: long press and hold the power button, the power-off progress bar will be displayed, and the power-off succeeds after the progress bar is finished. b.
GB CN DE FR RU short-press the power on/off button to complete the corresponding compensation action (except automatic compensation). 2. PHOTOGRAPHING CONSTRUCTION TAKE PHOTOS When it is turned on and in the state where the menu is not recalled, short-press, take a photo and freeze the frame for 300ms to restore the real-time image.
GB CN DE FR ZOOM IN RU Press and hold the upper button to enlarge the real-time picture. 5. LOWER BUTTON SWITCHING COLOR PALETTES Short-press the button, to switch between white hot, black hot, adjustable red hot, green hot, blue hot, iron red. ZOOM OUT Long press button, can be changed from zoom in to zoom out the real-time picture. 6. MENU BUTTON SHORTCUT MENU When it is powered on and the menu is not recalled, short-press the Menu button, and the shortcut menu option will appear.
GB CN DE FR RU menu button to return to or exit the menu without saving the current settings. 【FUNCTION DESCRIPTION】 1. SHORTCUT MENU · PIP: There are top left, top middle, and top right positions to choose from. · Screen BRI: Screen BRI level can be adjusted, 1-10 levels can be adjusted. · Hot track: a white cross cursor is displayed when it is turned on to trace the highest temperature point in the full image.
GB CN DE FR RU and iron red. · Brightness: detector brightness can be adjusted with 1-10 levels. NOTE: The adjusted brightness value will be saved in the current scene mode. · Contrast: Adjustable for 1-10 levels. NOTE: The adjusted contrast value will be saved in the current scene mode. · Compensation mode: automatic compensation/ scene compensation/shutter compensation can be set.
GB CN DE the location of the device can be obtained. FR RU · Compass: After opening and zeroing, current orientation information can be displayed. · Accelerometer: When turned on, it can indicate the correction of the grip angle of the current device, and when the device has an angle deviation, it will give a homing prompt. · Auto Stand-by: the Auto Stand-by time can be set to 5/10/15 min. If there is no operation within the set time, the sleep state will be entered.
GB CN DE FR RU Russian/German/French. · Memory card formatting: you can select formatting memory card, select 'yes', memory card formatting, select 'no', cancel the operation. · Restore default: You can choose whether to restore the default values. Select 'Yes' to restore all parameters to factory settings; Select 'No' to cancel the operation. · Remote control: When it is turned on, it will search for a Bluetooth remote control.
GB CN DE FR RU power indicator will be displayed on the lower left corner of the screen, and the part with power indicator on will display the remaining power of the cell. · After the power-on screen to enter the real-time picture, the screen will display the icon corresponding to the above power level. NOTE: When the power is low, please replace the cell in time! FCC WARNING This equipment may generate or use radio frequency energy.
GB CN DE FR RU portable exposure condition without restriction. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
GB CN DE FR RU - TROUBLESHOOTING 1. Device fails to start. Solution: Replace the cell or connect the adapter for charging. 2. The device cannot take photos/record. Solution: the internal storage space of the device is full, format the memory card. 3. The device display time does not match the actual time display. Solution: Reset the time and date of the device in the menu. 4. Screen goes out during use. Solution: Short-press any button to wake up the hibernation and light up the screen. 5.
GB CN DE FR RU - STORAGE AND TRANSPORT The following is the correct storage and transportation of the product. To prevent danger, property loss, etc., please read the manual carefully before using the device. Strictly observe it, and keep the instruction properly after reading it. Storage: 1. The packaged product shall be stored in a wellventilated, clean, condensate-free and corrosive gasfree room with temperature of -30 ℃ ~ 60 ℃ and relative humidity not exceeding 95%. 2.
