TY LI 3 QU R YEAR TY W A AS SU ED A Artemis Validator Operator’s Guide RRAN Se e ou r standard ter ms of sa le Guidance Marine Ltd, 5 Tiber Way, Meridian Business Park, Leicester LE19 1QP, UK T: +44 116 229 2600 E: sales@guidance.eu.com www.guidance.eu.com www.marine.
Artemis Validator Operator’s Guide Issue Date: 21/03/2017 Document No: 94-0505-4-C Serial No: Guidance Marine Ltd, 5 Tiber Way Meridian Business Park Leicester LE19 1QP UK Date of Shipment from UK: Document History Document Number Changes Issue Date 94-0505-4-A First Release Artemis Validator Operator’s Guide 29/11/2016 94-0505-4-B Artemis Validator Operator’s Guide 02/03/2017 94-0505-4-C Artemis Validator Operator’s Guide with FCC 21/03/2017 FCC ID VYMVALIDATOR FCC Warning Statement This devi
Table of Contents Introduction System Overview....................................................................................................... 4 User Interface Start Up .................................................................................................................... 5 Shut Down ................................................................................................................ 5 Menu Structure ............................................................................
Introduction and System Overview Introduction Welcome to the Artemis Validator Operator’s Guide. It explains how to use the portable version of the Artemis Validator to confirm that an Artemis Mk5 or Mk6 position reference sensor is in working order. The System Overview sets the Artemis Validator in the context of the Artemis system as a whole.
User Interface The user interface for the portable Artemis Validator consists of five buttons and an LCD display. Menu Structure The information display pages are arranged into a menu structure. The ▲▼►and ◄ buttons are used to navigate this structure. At the top level of the menu structure, the first line of the display always reads “Validator:”. Use the ▲and ▼buttons to scroll through the pages at this level. For example: ▼ ▼ Start Up Switch on the Artemis Validator by pressing the On/Off button.
User Interface (Continued) The full menu structure in order of scrolling is as follows: Top-level Menu Option Possible Values Sub-Menu for Setting Modification Description Range 500-10000m in 100m steps Yes Simulated range between Artemis Validator and sensor Ver xx.xx.xx.
User Interface (Continued) Modifying Settings In general, the purpose of a sub-menu page is to allow you to modify a particular setting. The ▲and ▼buttons cause the “New” value to increase, decrease, scroll or toggle as appropriate, whilst the existing value remains the same on the top line. For example to change the validation range from 1000m to 1100m: ► ▲ ► The ►button confirms the choice, or takes you into a submenu. The ◄ button cancels a choice and returns to the next menu level up.
User Interface Layout Artemis Validator Range Setting ► ▲ ► Artemis Validator Test Result Press ►to display one of the following results. This section is not editable. One of these screens below is shown depending on the status of the Validator. Press ◄ to return to the menu. Artemis Validator FPGA Version Artemis Validator S/W Version ► ► Press ◄ to return to the menu. Press ◄ to return to the menu.
User Interface Layout(Continued) Artemis Validator Charger Press ►to display one of the following results. This section is not editable. One of these screens below is shown depending on the status of the Validator. Press ◄ to return to the menu. When the status of the charger cannot be determined Artemis Validator Save Settings ► ▼▲ Press ►to confirm your changes. Artemis Validator Address ► ▼▲ Press ►to confirm your changes.
User Interface Layout(Continued) Artemis Validator Frequency Pair ► ▲ Press ►to confirm your changes.
Operation The purpose of the Artemis Validator is to test whether an Artemis sensor (Mobile Station) is in working order. This involves configuring the device to imitate a fixed station that the sensor under test normally locks onto. Configuration Procedure 1. Switch on the Artemis Validator. 2. Use the push button controls to navigate the menu system and set the Freq Pair and Address to the same values as the Artemis unti that is being validated (see Modifying Settings on page 7). 3.
Rechargable Artemis Validator Switch the unit off when not in use to preserve the battery. ! The Artemis Validator is water resistant. However, do not submerge the unit in water. To Switch the Artemis Validator ON: ! Do not open the Artemis Validator. If you experience any problems with the unit, please contact: Guidance Marine Ltd 5 Tiber Way Meridian Business Park Leicester LE19 1QP United Kingdom Tel: +44 (0) 116 229 2600 Email: customerservices@guidance.eu.
Dimensions Diagram not to scale. Dimensions measured in mm. Approx weight: 4.5 kg 220.5 252 272.5 336.5 64 117.5 58.7 29 84.8 117.5 115.5 143.2 220.