Item Brochure

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
The Rack
Part #: 15169
The Rack, when used in combination with a compatible system,
as specified by user instruction manual, is compliant with all
applicable ANSI IWCA I-14.1-2001 regulations.
Custom configurations not available. Not repairable.
Contact customer service for details.
The Rack is a welded steel frame for placement on a building’s
parapet, and functions to assist in window washing applications.
Parapet must withstand loads of at least 5,000 lbs., as
determined by a Qualified Person.
All PFAS equipment must be deemed compatible by a
Competent Person. Always read and understand all PFAS
equipment instructions.
Compatible with parapets between 10“ - 24” wide. Parapet
must be at least 10“ in height. After installation, The Rack must
be fully flush and fully set on parapet.
Window washing ropes must not be used longer than 2 years
from Date of First Use, or 3 years from Date of Manufacture.
On descents exceeding 130’, provisions must be made for
continuous suspension, intermittent suspension, or for a work
station. Descents must never exceed 300’.
The Rack must be tied off with a safety line to a certified anchor
point, and the user must be tied off with a tie-back rope to a
SEPARATE certified anchor point. Anchor points must be directly
in line with The Rack.
MAXIMUM 1 user per unit.
UPC-A Code(s): 672421151694
Materials: galvanized steel.