Product Manual

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
Guardrail Outrigger
Materials: powder-coated steel.
Compliant with all OSHA 1910 and OSHA 1926
Subpart M regulations when used as component
of compliant guardrail system.
Fall Prevention: Guardrail Outrigger is intended for use in combination with the Guardian
Fall Protection G-rail (part #s 15181, 15182, 15183, and 15202) for use in Fall Prevention
applications. Fall Prevention systems are used in place of, or in addition to, Fall Arrest or
safety netting systems. Fall Prevention systems are placed around the leading edges of any
and all fall hazards to which a worker may be exposed to prevent a worker from going over
an edge, and are therefore considered to eliminate the hazard. G-rail systems MUST ONLY
be used for Fall Prevention applications. Personal Fall Arrest, Restraint, Work Positioning,
Climbing, and all other systems or applications must NEVER be connected to G-rail systems.
Use of equipment in unintended applications may result in serious injury or death.
85289 (Rev. A)
Part #: 15160
26”
12.75”
ø 1.66”
15178 15180
Guardrail Outrigger is suitable for the following application:
UPC-A Code: 672421151601
Compatible with Guardian Fall Protection
baseplate part #s 15178 and 15180.
For use as outrigger ONLY. Not a guardrail!
ALWAYS use Guardrail Outriggers at BOTH ends of any interruption in continuous guardrail sections,
and at BOTH ends of a continuous guardrail section. Guardrail Outriggers must be installed perpendicular
to a continuous guardrail run. Outriggers function to provide stability at guardrail system endpoints.