Item Brochure

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
Guardrail Receivers
Compliant with all OSHA 1910 and OSHA 1926 Subpart M regulations.
UPC-A Codes: 15158: 672421151588; 15159: 672421151595;
15188: 672421151885; 61027: 672421610276; 61029: 672421610290;
61140: 672421611402; 61141: 672421611419
Part # Materials Description
15158
15159
15188
61027
61140
61141
Powder Coated Steel
Powder Coated Steel
Galvanized Steel
High Strength Plastic
Powder Coated Steel
Galvanized Steel
61029
Powder Coated Steel
Guardrail Receiver for use with Guardrail Posts
Guardrail Standard Gusset Mount
Guardrail Angel Boot
Extended Guardrail Gusset Mount
Stair Mount for use with Guardrail Posts
Guardrail Receiver for use with 2” x 4” Boards
Stair Mount for use with 2” x 4” Boards
#15159
#15188
#61027
#61029
#61140
#61141
#15158
!
WARNING
Use of equipment in unintended applications may result in
serious injury or death. NEVER make any connections to
guardrail systems. NEVER lean or climb on guardrail systems.
Fall Prevention: Guardrail Receivers may be used in Fall Prevention
applications ONLY. Fall Prevention Systems are placed around the
leading edges of any and all fall hazards to prevent a worker from
going over an edge, and may be used in substitute of Fall Protection
or safety netting systems. Installation requirements for Guardrail
Receivers set forth in this manual MUST be adhered to. Personal Fall
Arrest, Work Positioning, Climbing, Rescue, and any other systems
must NEVER be connected to Fall Prevention Systems.
Surfaces more than 6’ above lower levels require the use
of a Fall Prevention or Fall Protection system.
For all Guardrail Receivers, fasteners MUST be completely embedded in substrate,
and MUST be deemed compatible with applicable Guardrail Receiver by a
Competent Person. Guardrail Receivers MUST be installed flush against substrate,
and must allow guardrail posts to be positioned perpendicular to work surface.
Refer to instructions for installation information.
Guardrail Receivers are suitable for the following applications:
Custom configurations not available. Not repairable.
Contact customer service for details.