Item Brochure

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
Safe-T™ Ladder Gate
Part #: 10798
Materials: powder-coated aluminum.
Compliant with all OSHA 1910 and
OSHA 1926 Subpart M regulations.
Safe-T™ Ladder Gate is suitable for the following application:
MAXIMUM 1 user per ladder at any time.
UPC-A Code: 672421107981.
Shown installed on
Safe-T™ Ladder (#10800)
Safe-T™ Ladder Gate may only be used in combination
with a compatible ladder in Fall Prevention applications.
Fall Prevention Systems are placed around the leading
edges of any and all fall hazards to prevent a worker
from going over an edge. Installation requirements for
Safe-T™ Ladder Gate must be adhered to. Personal Fall
Arrest, Work Positioning, Rescue, and any other systems
must NEVER be connected to Fall Prevention Systems.
Top rung step of ladder must be in line with landing platform.
Components:
(4) Allen Screws (4mm or 5/32”)
(2) Brackets
(1) Safety Ladder Gate
Always adhere to ladder slope requirements (4/1, vertical/horizontal).
Ladder MUST be secured to landing platform to use Safe-T™ Ladder Gate.
Only use ladder on stable and level surfaces.
Top of Safe-T™ Ladder Gate MUST be 42” (+/- 3”) above walking surface.
One hand must always grasp a ladder rung during climbing.
NEVER carry loads that may cause loss of balance.
Not repairable by the manufacturer.
29.56”
13.12”
x4 x2