Product Name: Rope Grab Part #: 01500; 01503; 01505; 01506; 01507; 01508; 01509; 01511 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment! Introduction 1 Applicable Safety Standards 1 Worker Classifications 1 Product Specific Applications 2 Limitations 2-3 Components and Specifications 3 Installation and Use 4 Maintenance, Cleaning, and Storage 5 Inspection 5 Inspection Log 5 Safety Information 6 Labels 7
Date of First Use: Serial #: Trainer: User: Applicable Safety Standards When used according to instruction specifications, this product meets or exceeds all applicable OSHA 1926 Subpart M, OSHA 1910, ANSI Z359.1-2007, and ANSI A10.32-2012 standards for fall protection. Applicable standards and regulations depend on the type of work being done, and also might include state-specific regulations. Consult regulatory agencies for more information on personal fall arrest systems and associated components.
www.guardianfall.com phone: (800) 466-6385 fax: (800) 670-7892 6305 S. 231st St., Kent, WA 98032 Guardian Fall Protection Product Specific Applications ! WARNING Use of equipment in unintended applications may result in serious injury or death. Maximum 1 attachment per connection point. Personal Fall Arrest: Rope Grabs may be used to support a MAXIMUM 1 Personal Fall Arrest System (PFAS) for use in Fall Arrest applications.
Two connectors to same D-ring. NO. Connector directly to webbing. NO. Incompatible or irregular application, which may increase risk of roll-out. NO. Connector directly to horizontal lifeline. NO. Two or more snap hooks or carabiners connected to each other. NO. Components and Specifications Materials: galvanized steel or stainless steel, nylon, and polyester.
www.guardianfall.com phone: (800) 466-6385 fax: (800) 670-7892 01503 01500 01505 01506 01511 01507 01508 01509 Installation and Use 6305 S. 231st St., Kent, WA 98032 Prior to installation: 1. Robe Grab for use in combination with compatible vertical lifeline (VLL). Ensure VLL on which Rope Grab is to be installed is compliant with all applicable OSHA and ANSI regulations. • Compatible with VLL diameters from 1/2” - 5/8”. ! WARNING NEVER use with incompatible lifelines. 2.
For part # 01506, transition between trailing and positioning functionality by releasing tension lever. 1. Trailing Positioning 2. Maintenance, Cleaning, and Storage If Rope Grab fails inspection in any way, immediately remove it from service, and contact Guardian to inquire about its return or repair. Cleaning after use is important for maintaining the safety and longevity of Rope Grab. Remove all dirt, corrosives, and contaminants from Rope Grab before and after each use.
www.guardianfall.com phone: (800) 466-6385 fax: (800) 670-7892 Inspection Log User must inspect prior to EACH use. Competent Person other than user must complete formal inspection at least every 6 months. Competent Person to inspect and initial. Date of First Use: __________________. Product lifetime is indefinite, as long as product passes all inspection requirements. This inspection log must be specific to one Rope Grab. Separate inspection logs must be used for each Rope Grab.
Training of Authorized Persons to correctly erect, disassemble, inspect, maintain, store, and use equipment must be provided by a Competent Person. Training must include the ability to recognize fall hazards, minimize the likelihood of fall hazards, and the correct use of personal fall arrest systems. NEVER use fall protection equipment of any kind to hang, lift, support, or hoist tools or equipment, unless explicitly certified for such use.