User Manual 1
READ THIS FIRST 4 CHAPTER 1. SET UP AND GET STARTED OVERVIEW CHARGING THE WATCH SETUP YOUR WATCH WITH LUTIBAND MOBILE APP TURN THE WATCH ON AND OFF TURN ON THE WATCH TURN OFF THE WATCH WAKE UP THE WATCH DISPLAY SIM CARD (Nano SIM) REMOVE AND ATTACH THE WATCH BANDS 5 5 5 6 7 7 7 8 8 8 CHAPTER 2.
NOTIFICATIONS SETTINGs REFRESH LOCATION LOCATION TRACKING MODE HISTORY TRACKING BIOMETRIC SENSORS ACTIVITY TRACKING RING WATCH OPTIONS TRUSTED PLACES SHARE BIOMETRIC SENSORS BIOMETRICS ReQUEST BIOMETRICS ReQUEST with confirmation ALERT SETTINGS MEDICAL ID MEDICATION REMAINDERS LOW BATTERY POWER OFF MESSAGES TEXT MESSAGES AUDIO MESSAGES MESSAGES WITH QUESTION SPECIFICATIONS GENERAL SPECIFICATIONS SAFETY IMPORTANT SAFETY INFORMATION IMPORTANT SAFETY INSTRUCTIONS HEARING LOSS MEDICAL DEVICE INTERFERENCE SKIN I
READ THIS FIRST • Before using this documentation and the device it supports, ensure that you read and understand the "Important safety information" on page 26. • Illustrations in this documentation might look different from your device. • Instructions in this documentation may vary depending on your device model and software version. • Some apps and features are not available in all countries or regions. App and feature availability is subject to change.
CHAPTER 1. SET UP AND GET STARTED This manual describes everything you need to know about your LutiBand Watch. If you need more information, visit www.LutiBand.com. OVERVIEW CHARGING THE WATCH Charge the watch before using it for the first time. To charge the watch, follow these steps: 1. Connect the charger included with your LutiBand to a USB connector. 2. Place the watch in the charger as shown below.
3. Ensure the contacts on the back of the watch are engaged with those on the charger. The watch display will show a charging icon and battery level. 4. When the watch is fully charged, remove it from the charger. The watch is now ready for setup. NOTE It takes approximately 3 hours to fully charge the watch. The charging time may vary depending on the battery usage conditions. Full charged watch will provide you full day battery life.
TURN THE WATCH ON AND OFF TURN ON THE WATCH If your watch is off, press and hold the LutiBand button until the animation starts showing on the watch’s display. TURN OFF THE WATCH To turn off the watch, you have the following 2 options: 1. Touch the turn off icon located on the top middle of the watch display. 2.
WAKE UP THE WATCH DISPLAY You can wake up the watch display by using the following methods: • Raise your wrist. • Press the watch button. If your watch does not wake up when you press the watch button, it may need charging. NOTE The display will turn off automatically after 15 seconds of inactivity. SIM CARD (Nano SIM) REMOVE AND ATTACH THE WATCH BANDS Remove and attach the watch band as illustrated below.
CHAPTER 2. BASICS ICONS ADJUST SOUND To adjust the sound, of your watch follow these steps: 1. Open the LutiBand mobile app. 2. Go to settings. 3. Touch the LutiBand watch you want to adjust the sound from your list of watches. 4. Touch on Watch Volume and Bright. 5. Select the sound level you prefer . After you change the level, the watch will play an audio, for you to check the sound level.
ADJUST BRIGHTNESS To adjust the sound of your watch, follow these steps: 1. Open the LutiBand mobile app. 2. Go to settings. 3. Touch the LutiBand watch you want to adjust the sound from your list of watches. 4. Touch on Watch Volume and Bright. 5. Select the brightness level you prefer. AIRPLANE MODE TURN ON AIRPLANE MODE To turn on Airplane mode, follow these steps: 1. Open the LutiBand mobile app. 2. Go to settings. 3.
CHANGE THE WATCH FACE To change your watch face, follow these steps: 1. Open the LutiBand mobile app. 2. Go to settings. 3. Touch the LutiBand watch you want to change the watch face from your list of watches. 4. Touch Watch face option. 5. Select the face you like. Faces available BIOMETRICS SENSOR BUTTON You can enable or disable the biometrics sensor button anytime. This button allows you to initiate the biometrics sensors measurement any time and keep your records updated all the time.
To enable or disable the button on the watch screen, follow these steps: 1. Open the LutiBand mobile app. 2. Go to settings. 3. Touch the LutiBand watch you want to activate the sensors button from your list of watches. 4. Move the Sensors Button switch to On or Off MANAGE FALL DETECTION TURN ON AND OFF FALL DETECTION The fall detection feature can be turned on or off, depending on your preference. If you want to turn this feature on, you have to follow these steps: 1. 2. 3. 4. 5.
FALL DETECTION EVENT In case you have enabled the fall detection feature and a fall event happens, your watch will show the following screen, giving you 5 seconds to be able to cancel the alert in case it was a false alarm. I’M OK This feature allows you to notify your emergency contacts, letting them know you are OK and where you are located at the time. This is a handy feature you will be able to use any time and also, after an emergency, to let them know that you are OK.
PHONE CALLS EMERGENCY CALL Your LutiBand watch is prepared to initiate a call to the emergency services in case you have an emergency situation. To initiate an emergency call, you only have to press and hold the watch button for more than 5 seconds and the watch will initiate the call for you, directly from the calling service included on your watch (it is required to be nearby or connected to any phone in order to work).
PHONEBOOK The LutiBand watch, allows you to create a phone book including the 4 contacts that you will be able to call and receive calls from. You will not be able to make or receive calls to other phone numbers that are not included on the phonebook. To create your phone call, you will have to follow these steps: 1. Open the LutiBand mobile app. 2. Go to settings. 3. Touch the LutiBand watch you want to create or edit the phonebook from your list of watches. 4. Touch the phonebook option. 5.
RECEIVING CALLS You will be able to receive calls, only from the contacts you have stored on your phone book (all other calls will be rejected). As soon as you get a call, the watch will start playing a ring tone, vibrating and showing the following screen. You will be able to accept the call or reject it. NOTE This feature is not available on all subscriptions and or all countries.
BIOMETRICS INFORMATION To be able to access the Biometrics information, you will have to swipe on your screen from right to left until the watch shows the Biometrics information. The screen will look like this: 100% RESET AND UPDATE THE WATCH RESET THE WATCH In case something happens and you have to restart your watch because it is not responding correctly, just press and hold the watch button for 15 seconds and the watch will turn off automatically.
NOTES • To be able to update your watch software, the watch has to have at least 50% battery level. • It is recommended to initiate the software update with the watch connected to the charger, to avoid loss of power during the update. SECURITY CLASP Each LutiBand Watch, comes with a security clasp. This will add an extra protection, preventing the bands from opening easily, both accidentally or if an adult who should not take it off tries to open it.
CHAPTER 3. LUTIBAND MOBILE APP DOWNLOAD THE MOBILE APP LutiBand App its available for iPhone and Android phones. Search LutiBand App on Google Play App Store or Apple App Store and download it to your phone. SIGN UP Once the mobile app is installed, the first thing you will have to do, is create your LutiBand Account. Make sure that prior to creating the account, you must have an active LutiBand Subscription (On the activation process, our app will ask you for this information).
NOTIFICATIONS On this option, you will have access to all the notifications you have available from all the watches under your account. SETTINGS On this option, you will have access to all the settings on your account and also of the watch settings under your account.
LOCATION You will always be able to see the last location that was reported from this watch on the map. TRACKING MODE Each watch will send geo-location information periodically, but you will be able to activate the tracking mode to get the location of this watch more frequently while you are under the tracking mode screen. NOTES Activating Tracking Mode, will consume more watch battery than normal, we recommend to use this option only when it’s necessary.
TRUSTED PLACES You will be able to create, edit or remove places where you usually visit (like home, doctors office, etc.) and create a geo-fence, to notify your emergency contacts or the people you shared your watch with, when you arrive or leave these places. SHARE You are able to share your watch with people you want, and that will be able to access your information and also, be notified in case of emergency. To share your watch, you will have to invite the person and they have to accept the invitation.
Notify when departed a trusted place: Will notify your contacts when you leave to a trusted place. Charge complete Alert: Get an alert when your watch is fully charged. Low battery alert: You will be able to configure the level of battery you want to get an alert for, the alert will happen when the watch battery fall bellow the level you selected.
POWER OFF You will also be able to turn off LutiBand watch remotely, following these steps: 1. 2. 3. 4. Open the LutiBand mobile app. Go to settings. Touch the LutiBand watch you want to turn off from your list of watches. Touch the Turn this LutiBand Off option. MESSAGES Accessing the Messages Option, you will be able to interact with the LutiBand watch.
SPECIFICATIONS GENERAL SPECIFICATIONS • • • • • • • • • • • • • • • • • • • • • Button with 3 gestures Touch Screen Display Microphone Speaker GPS Integrated 4G LTE - Data and Calling * Waterproof - IP67 Security Clasp Two Silicone Bands included (Small and Large) Portable Magnetic Charger included Rechargeable Battery Weight 59grs Dimensions 44 x 37.8 x 12.
SAFETY IMPORTANT SAFETY INFORMATION Read all safety information before using your product. Failure to follow these safety instructions could result in injury, or damage to your product or other property. IMPORTANT SAFETY INSTRUCTIONS • Observe signs and notices that prohibit or restrict the use of electronic devices. • Do not disassemble or attempt to repair your watch yourself. Disassembling the watch may damage it, result in loss of water resistance, or cause injury. • Always handle your watch with care.
MEDICAL DEVICE INTERFERENCE Your watch contains magnets which may interfere with medical devices such as pacemakers, defibrillators, or other medical devices. If you are a user of any of these medical devices, consult your physician for information specific to your medical device and whether you need to maintain a safe distance of separation between your medical device and the watch. SKIN IRRITATION This watch is made of materials commonly used in wearable consumer electronic items.
OPERATING TEMPERATURE Your watch is designed to work and be stored in ambient temperatures between –10 C and 45 C (14 F and 113 F). Your watch can be damaged and battery life shortened if stored or operated outside of these temperature ranges. Avoid exposing the watch to dramatic changes in temperature or humidity. REGULATORY COMPLIANCE INFORMATION This section introduces regulatory information, certification, and compliance information specific to your product.
FCC RADIATION EXPOSURE STATEMENT This device meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. The SAR limit of USA (FCC) is 1.6 W/kg averaged.
