MI22.46HZ GHAT RADIO CONTROL SYSTEM USER'S GUIDE F/S {FAIL SAFE) Choosing Fail Safe Settings: 1) From within the SETUP menu, scroll UP or DOWN to highlight the F/S menu. ST > FREE TH > FREE AUX > FREE 2) Press the ENTER key to open the F/S menu. ST» FREE will be highlighted. 3) Scroll UP or DOWN to highlight the desired channel you would like to change ST > FREE the Naif Sate value for, TH > 4) Press the ENTER key, then scroll UP ar DOWN to chose the desired Fail Safe AUX > FREE value for that channel.
M12 2.4GHZ FATAH RADIO CONTROL SYSTEM USER'S GUIDE [Tsetse | IRE UOLT(RX) > Choosing the Receiver Battery Voltage Value, Continued... CHL > INH 2) Press the ENTER key to open the B-F/S menu. VOLT (RX) > OFF will be CH2 > INH highlighted. CH3 > INH CH4 > INH RE Press the ENTER key, then scroll UP or DOWN to choose the desired Receiver OUTCRY > 3 Eatery Voltage value. Many factors, such as the current draw of your servos CH1 > INH and how many servos you're using, etc. will determine the value fo use.
M12 R2.4GHZ GHAT RADIO CONTROL SYSTEM USER'S GUIDE LAB TIMER MENU {VIEW LAD TIMES AND CHOOSE LAB TIMER ORATIONS) Setting the Goal Time: Wren the Lap Timer is counting Up, a long audible Tone will sound when the Goal Time is reached. For example, if you set the Goal Time value for 5 Minutes, a long audible Tone will sound when the Lap Timer reaches 5 minutes. When the Goal Time is reached the Lap Timer will continue counting Up, but you will no longer be able to continue counting Lap Times.
MI122.4GHZ GHAT HA DID CONTROL SYSTEM USER'S GUIDE LAR TIMER MENU(VIEW LAB TIMES AND CHOOSE LAR TIMER DE RUCTIONS stub Stopping the Lap Timer: 1) To Stop the Lap Timer, pass and HOLD the Lap Timer Switch for 3 seconds. An audible Double-Tone will sound and LAP [STOPPED] will be displayed momentarily in a pop-up window, indicating the Lap Timer is stopped. The Cumulative Time cannot he manually cleared.
MI2 2.46HZ 4TH RADIO CONTROL SYSTEM USER'S GUIDE BD rear) i Choosing the Optional Throttle Trigger Start, Continued... 06’ 09” 1 From wii tho INT) many, scroll UP os DOWN t Sight Starter > INTERVAL 3 82° 30-08 2) Press the ENTER key, then scroll UP or DOWN to choose the desired Start Trigger value, either ON of OFF.
MIA2246HZ FHA RADIO CONTROL SYSTEM USER'S GUIDE macing | The following Programming Menus are available within ihe RACING menu: MENU MENU DESCRIPTION PAGE # OFFSET ‘Turn Throttle Offset ON or OFF and Choose Throttle Offset Options PG. 85 BR-MIX Program Dual Brake Mixing Option (Dual Brake Car Types Only) PG. 87 TH-H Turn Throttle Hold ON or OFF and Choose Throttle Hold Options °G.87 MIXTEC Program Compensation Mixing 1 Options PG. 89 C-MIX Program Compensation Mixing 2 Options PG.
M12 GHZ GHAT RADIO CONTROL SYSTEM USER'S GUIDE eT) | race] Turning Separate Functions ON and OFF: When Racing Mode is turned ON (R-MODE » ACT), various functions can be programmed the same for all five Racing Modes or they can be programmed independently, allowing you to have different function Programming Values for sate of the five Racing Modes For example, with Durst set to ON, you can choose a Dual Rate Steering percentage value of 1009 for Racing Mode 1, a Dual Rate Steering percentage value of 80% for
M12 2.46HZ GHAT RADIO CONTROL SYSTEM USER'S GUIDE 2d ty Ea SVE ei RACING nD Adjusting the Dual Rate Percentage Values: 1) From within the RACING menu, scroll UR or DOWN to highlight the D/R menu. 188% TH» 100% @ BR > 180% BEET CRN « ST > Hes TH> 109% 2) Cross the ENTER key to open the D/R menu. ST > 100% will be highlighted. 188% ce EE 3) Scroll UP or DOWN to highlight the desired Dual Rate percentage value you N would like to change.
M12 24C6HZ GHAT RADIO CONTROL SYSTEM USER'S GUIDE EE eis | ASCII | Before adjusting the Trim values, you should first verify that all Trim values are set to 0, then adjust the servo Sub-Trim values to center the versa hom perfectly. For more information, see the SUB TRIM Menu section on page 63. WDE 0 m0 a) SENTRY Adjusting the Trim Values: oAT SETUP 1} From within the RACING menu, scroll UP or DOWN to highlight the TRIM Hi menu. AUX > 2) Press the ENTER key to open the TRIM menu.
M12 2.46H2Z GHAT RADIO CONTROL SYSTEM USER'S GUIDE EXPONENTIATION LL, ADJUSTABLE RATE CONTROL AND CURVE) [Racine] Foy, CE Ba CARPENTRY SETUP Choosing the Channel and the Curve Type: LE, 13 From within the RACING menu, scroll UP or DOWN to highlight the CURVE [To . men. TYPE> EXP RATE) Oz yd Tues LY 8 Er ara 2) Press the ENTER key to open the CURVE menu.
M12 2.4d6HZ GHAT RADIO CONTROL SYSTEM USER'S GUIDE CURVE MERE (EXPONENTIAL, ADJUSTABLE BATE CONTROL AND CUBE] Adjustable Rate Control Programming The Adjustable Rate Control (ARC) function allows you to vary the amount of servo wave in relation to the movement of the Steering Wheel and Throttle Trigger (or in some cases, the Auxiliary Dial and/or the Auxiliary Lever) near the Neutral positions to change the way those functions react to control movement.
MA122.46GHZ GHAT RADIO.CONTROL SYSTEM USER'S GUIDE CURVE EXPONENTIATION ADJUSTABLE RATE CONTROL AND CURVE) CORRALLING Adjusting the Rate Percentage Value: The Rate percentage value determines the amount and type of ARC, either Quick, Mild or Linear (see diagram on the previous page). When a Positive or Negative ARC percentage value is programmed, a Linear Curve will be created from the Neutral Point RIS 1) From within the CURVE men, scroll UP or DOWN to highlight RATE > 0%.
M12 2.46GHZFH4T RADIO. CONTROL SYSTEM USER'S GUIDE CURVE MENU (EXPONENTIAL, ADJUSTABLE RATE CONTROL AND CURVE) | macing | PHENOTYPE P3y 30x Choosing the Channel and the Curve Type, Continued... 2} Press the ENTER key to open the CURVE menu. The < ST > channel will be Selected. Press the SELECT switch RIGHT or LEFT to choose the desired channel you 3 would like to program Channel Curve for.
M12 2.4GHZFHAT RADIO CONTROL SYSTEM USER'S GUIDE SHRED MENU [SERVO SPEED) | mace] Choosing the Channel, Continued... 2) Press the ENTER key to open the SPEED menu. The < Selected. 3) Press the SELECT switch RIGHT or LEFT ta choose the desired channel you wattled like to program the Servo Speed function for.
M12 2.4AGHZ GHAT RADIO CONTROL SYSTEM USER'S. GUIDE ALE MENU ANTICKED BEAK ING), The Anti-Lock Braking function makes it possible to achieve stable Braking even on a slippery surface. With stable Braking, your Model is better able to trace an exact ine under Braking. Wuhan the Anti-Lock Braking function is turned ON, the Throttle servo wif pulse when you apply Brake.
M12 2.46HZ GHAT RADIO CONTROL SYSTEM USER'S GUIDE ALE ANTICLOCKWISE BEARING] Adjusting the Point Percentage Value: The Point percentage value determines the position along the length of Brake Side servo travel that the Anti-Lock Braking function Activates at when termed ON.
M12 2.4GHZ GHAT RADIO CONTROL SYSTEM USER'S GUIDE a er a Rena Nd ‘When the Throttle Offset function is turned ON, [OFFS] ON will be momentarily displayed in a pop-up window, LED will flash and an Audible Mar will sound until the Throttle Offset function is turned OFF. In the default configuration, Push-Button Switch Swi turns the Throttle Offset function ON and GFF.
MI122.
M12 2.46HZFHAT RADIO CONTROL SYSTEM USER'S GUIDE TH-HELD MENU{THRDOTTLE HOLD Sa that the Throttle Hold function can be turned ON and OFF while you're driving, it must first be Assigned to a Push-caution Switch. For more information, see the Push-Button Switch Assignments section on pages 33 ~ 34.
M12 246HZ FHA RADIO CONTROL SYSTEM USER'S GUIDE MIX AND MIXER CUMBERSOMENESS NATION MIXING AND COMPENSATION MIXING 2} The Compensation Mixing function is used to create your own custom Mixes that allow you to control any number of desired functions in different combinations. For example, you can use the Compensation Mixing function to delay an air-Brake when you apply Brake or raise a wing as you Increase Throttle.
MI22,46GHZ GHAT RADIO CONTROL SYSTEM USER'S GUIDE (rN XE MENU {COMPENSATION MIXING 1 ANE COMBINATION MIXING 2! The table below shows the Channel Output Data of each Master channel, This is the Data that will be duplicated on the Slave channel when Compensation Mixing is tuned ON.
M122.4GHZ GHAT RADIO CONTROL SYSTEM USER'S GUIDE 1X1 AND CME MENU {COMPENSATION MIXING 1 AND COMBERS NATION MIXING 2; Choosing the Rate 1 and Rate 2 Percentage Values: The Rate percentage values determine the amount and direction of Slave channel servo travel. Use a Positive or Negative percentage value to change the amount and direction of Slave channel servo travel. The Right side of the graph indicates Rate 1 percentage values and the Lat side of the graph indicates Rate 2 percentage values.
M12 2.46GH2 4TH RADIO CONTROL SYSTEM USER'S GUIDE SACKER MENU {MACKEREL ANGLE ADJUSTMENT) The Mackerel function allows you to change the Steering angle of the Front tires independently to prevent the tires from slipping during tums. Being able to change the Mackerel Angle can help improve your Model's high-speed cornering and improve tire wear. In general, your Model will comer better f the inner tire tus in at a sharper angle than the outer tire.
M12 2.4GHZ GHAT RADIO CONTROL SYSTEM USER'S GUIDE R-SLY MENU (RATING MODE VELA [ macing | Adjusting the Racing Mods Delay Percentage Va lugs, Continued... 2) Press the ENTER key to open the R-SLY menu. CHI = 0% will be highlighted. EA FR BEEN Scroll UP or DOWN to highlight the desired channel you want to change the CHL > 18% Racing Mode Delay percentage value for CH 19 4) Press the ENTER key, then scroll UP or DOWN to choose the desired Racing CH3 > 107 Mode Delay Percentage value.
M12 2.4GHZ GHAT RADIO CONTROL SYSTEM USER'S GUIDE CUB TAM MENU OVERVIEW. DOLE-@ To access the CUSTOM menu, tim the transmitter ON, then press the SELECT © 1 switch to highlight the CUSTOM menu Press the ENTER key to open the CUSTOM menu, The CUSTOM menu features the CH-SET menu and any other favorite Programming Menus you've added. 1 fH SANA MEE 7108: "108: Se roll UP or DOWN to highlight the desired Programming Menu, then press the HB: ENTER key to open halt menu.
M12 2.4CHZ LOTHARIO CONTROL SYSTEM USER'S GUIDE ADDING AND REMOVING FAVORITE MENUS. Many Programming Menus can be Added to the CUSTOM menu quickly and easily. This allows you to store and then aco most-used Programming Menus afl in one place within the CUSTOM men. 55 your Not all Programming Menus can be added to the CUSTOM menu. If a Programming Menu can be added to the CUSTOM menu, 'C ENTRY will be displayed In the Message Display Window when you fig hit the Programming Man.
M12 2.4GHZ GHAT RADIO CONTROL SYSTEM USER'S GUIDE TELEMETRY. CONGESTION AND MOUNTING When used with an Electronics Zigzag GHAT Telemetry-capable surface receiver, such as the RX-461 or RX-462, and up 10 two Temperature Sensors and an RPM Sensor (all available separately), Telemetry Data, such as RPM or Snead, Temperature, and Receiver Voltage can be viewed on the M12 transmitter's TELEMETRY screen.
M12 2. GHZ GHAT RADIO CONTROL SYSTEM USER'S GUIDE TELEMETRY CONNECTIONS AND MOUNTING Mounting the Temperature Sensor: 1) Secure the Sensor End directly against the part of your engine, miter, battery or other object you want to monitor temperature readings from, using either a nylon cable tie or high-temperature clear tape.
M12 2 GHZ GHAT RADIO CONTROL SYSTEM USER'S GUIDE BROILER CAUSE fe i Serra does nos move when using Trim Switch ‘Trim Is outside of operational range Center Trim Switches to 1, center the servo horn and control linkages Inadequate transmitting range Low transmitter battery voltage Replace or recharge transmitter battery Low receiver battery leakage Replace or recharge receiver batteries Receiver antenna not mounted corset Mount receiver antenna as recommended Servo(s) move the wrong direction Incarnate Servo
MI12246GHZFHAT CONTRARILY SYSTEM USER'S GUIDE RACING MODE FUNCTIONS BY CAR TYRE The table below shows the available Racing Mode functions by Car Type and channel, TPE Typ TYP TYP TYP IV TYPE TYR] | TYPICAL | TYP VIE | TY PIX TYP X FUNCTION.
M12 2.46HZ GHAT RADIO CONTROL SYSTEM USER'S GUIDE TRIM SWITCH, AUXILIARY DIAL AND. AUXILIARY LEVER FUNCTIONS The tables below shows the functions that can be Assigned to one of the five Trim Switches, the Auxiliary Dial or the Auxiliary Lever, Functions with an (7) Asterisk cannot be Assigned fo the Auxiliary Lever. Nat alt functions listed below can be Assigned to all Car Types, Functions will vary by Car Type.
M12 2.4GHZ GHAT RADIO CONTROL SYSTEM USER'S GUIDE GLOSSARY OF TERMS: Mackerel Angle: An engineered value that allows the inner fire to tum &t a sharper angle than the outer tire to prevent the tires from slipping during wns, Activate: To tum ON a particular function. Antenna: Transmits the signal from the transmitter to the receiver in the Model. Antenna Reception Wire: The portion of the receiver antenna that receives the transmitter signal.
M12 2.46HZ GHAT RADIO CONTROL SYSTEM USER'S GUIDE EE Code Auxiliary: A function designed for use with future connected products, such as an ESC, whose Programming Parameters can be changed directly via the transmitter.
M12 2 46HZFH4T RADIO CONTROL SYSTEM USER'S GUIDE Inactivity Alarm: This alarm will sound if the transmitter is Left on for a period of 10 minutes without any control input from the user. This alarm alerts you to prevent unwanted draining of the transmitter battery. Inhibit: To deactivate of turn OFF a particular function. Interval Timer: Used separately or in conjunction with the Lap Timer, notifies you when a set Interval elapses while you are driving.
M12 2.4GHZ 4TH RADIO CONTROL SYSTEM USER'S GUIDE IR Ne alr Point Auxiliary: Allows you to program the Auxiliary 1 or Auxiliary 2 Chanel servo to move up to 6 different Points along its travel, then cycle through those Paints using one of the five Trim Switches or the Auxiliary Dial. Point Setting: Locates the Point within the range of serve travel that you want a function to Start or Stop. This setting can vary depending on the actual function the Point selling is controlling.
M12 GHZ FHA RADIO CONTROL SYSTEM USER'S GUIDE Randell Stroke: Determines the amount of Brake that's applied automatically when the Anti-Lock Braking function Activates. Sub-Trim: Used to correct the Neutral Trim setting for the servos, making it possible to center the Trim Switches while ensuring the servo Harris remain centered.
0] LIT Get The Advantage. Astronautics is Distributed Exclusively in North America by: Global Hobby Distributors 18480 Bandier Circle Fountain Valley, CA 82708 Telephone: (714) 963-0329 Fax: (714) 964-6236 Email [Gee RAVINE Riel HR 1 Features and Specifications are Subject to Change Without Notice. All contents © 2012 Astronautics, inc. All Rights Reserved, Revision 107.26.