Installation Guide

Infrared Detectors
Detection
window
Hidden status
indicator
Bracket
CR123Abattery
Battery
compartment
Description of the appearance and components' function
Installation guide for Infrared detector
2-2.2m
Ground
The installation steps can be taken, after confirming that the infrared detector can work normally:
ⓛSelect a suitable installation location;
The recommended installation height is 2-2.2 meters from the ground. The purpose of installing
infrared is to prevent illegal intrusion and to cut off illegal intrusion lines, thus achieving the
purpose of anti-theft.
②Secure the infrared detector
Secure the mounting bracket to the wall with screws, and secure the groove on the back of the
infrared detector to the bracket.
Walk around the detection range and observe the LED indicator. The LED light will flash when
the human body is detected to move.
③Test infrared detector
Rotate the universal ball on the bracket to adjust the angle of the infrared detector to achieve
the best detection range.
④Adjust the angle
The detectable range of the human body is 5-8m in front and 130° in the
horizontal direction. The detecting effect is related to the ambient temperature,
body shape and moving speed.
130°
5- 8 m
Top view of induction range
Power: DC 3V (a 3V CR123A battery)
Wireless transmission distance: ≤80m (open space / no interference)
working frequency：868.35MHz/915MHz
Infrared Detectors
Smoke detector mate
Battery cover
Bracket
CR 2032 button cell ×2
Description of the appearance and components' function
Smoke detector mate
Power: DC 3V (two 3V 2032 button cell)
Wireless transmission distance: ≤80m (open space / no interference)
working frequency：868.35MHz/915MHz
Infrared
Detector
Front View
Smart night light doorbell(main unit)
Description of the appearance and components' function
Previous Track
Next Track
Volume
Pairing
button
Battery
compartment
Loudspeaker
LED light
Wall bracket
Screw holes
CR123A battery ×2
Back View
Features
Small size, full battery design, safe and convenient to use.
Full wireless configuration, DIY self-installation.
Built-in 16777214 groups of RF wireless password combination, safe and reliable.
Pair manually to augment accessories for easy operation.
Can work with a variety of different wireless accessories.
Built-in 52 world famous songs, free to choose.
The perfect combination of alarm and doorbell gives the family full protection.
Low power consumption design, standby for up to one year.
Adopting low power self-encoding wireless technology can avoid external interference, and
the receiving distance in the open area is up to 300 meters.
Overview
The wireless alarm adopts wireless transmission, powered by DC battery, and the installation
is more flexible, saving wiring costs. Users can add other security accessories according to
requirements, or install wireless night-light doorbell alarms in different places in the room to
achieve convenient answering and the effects of deterring illegal intruders when alarming.
Turn on/off
The battery is separated from the main unit when leaving the factory. When working, the
battery should be installed in the left and right battery compartments of the main unit. The
main unit will make a “beep”, indicating that it is turned on successfully. The main unit is
turned off when the battery is removed.
System sound and indication of warning light
The blue light flashes while the doorbell is calling, and the selected music is played at the
same time.
The blue light flashes and the loudspeaker sound an alarm when alarming.
When the infrared detector equipped in the front side of the main unit detect human activity in
the dark environment, the night light is on for 15 seconds and is turned off after 15 seconds.
Suitable for all kinds of house / office / hotel / factory / tourism and other environments.
Add/clear wireless accessories
Doorbell button: Press the pairing button in the battery compartment of the main unit；
②The main unit will beep once, and the indicator light will be on; ③Trigger the wireless
accessory with battery installed - press the button, ④ The main unit will beep once, and
indicate The light will go out, indicating that the pairing was successful.
①
①
②
③ ④
Emergency calling button：①Press the pairing button in the battery compartment of the
main unit; ② the main unit will make a “beep” and the indicator will light up; ③Trigger the
wireless accessory that has been installed with batteries; ④The main unit will give 1 “beep”,
and the indicator light will go out, indicating that the pairing is successful.
①
②
③ ④
If the operation triggers the wireless accessory that has the battery installed, the main unit will
make 2 “beep”, indicating that the accessory has been paired with the main unit. The main unit
enters the working state automatically when all operations are completed. To clear the wireless
accessory, press and hold the pairing button in the battery compartment for 5 seconds. Release
the pairing button when the main unit makes two “beep” and then all the accessories paired
with the main unit can be cleared.
Night light
The system can also be used as a night light in addition to being used as an on-site alarm system.
When the front area of 󰾬󰾬the main unit is in a dark environment，if a human motion is detected,
the night light will light up automatically and turn off after 15 seconds. If the human body
continues in the front detection area of 󰾬󰾬the main unit within 15 seconds, the light will not be
turned off until the human body leaves the detection area or keep motionless.
Technical Parameters
Smart night light doorbell
The detectable range for human body is 3-5m in front, 110° in level, and 2-3m on the sides; the
detecting effect is related to ambient temperature, body shape and moving speed.
110°
2-3 m
3-5 m
Volume: 90dB
Standby current: 170uA
Temperature: -10°C +55 °C
Top view of induction range
Power: DC 6V (two 3V CR123A battery)
Technical Parameters
Technical Parameters
Smart GSM alarm host (main unit)
Description of the appearance and components' function
LED light
Pairing
button
Battery
compartment
Pairing
indicator
SIM card slot
Wall bracket
Screw holes
CR123A battery ×2
Loudspeaker
Overview
High sensitivity, using imported MCU and deep artificial intelligence algorithm, it can
accurately capture the alarm sound from various smoke detectors on the market and the
wireless signals from various disaster prevention accessories, and then inform users
through SMS and telephone where the disaster or alarm have occurred, so that all current
types of on-site disaster prevention detectors are upgraded to intelligent network alarms,
improving the timeliness and intensity of disaster prevention and rescue greatly.
Features
The network can support 32 wireless disaster detection accessories.
Built-in 16777214 groups of RF wireless password combination.
Support for customizing the name of the guarded zone via mobile phone SMS
Support for configuring 8 alarm phone numbers.
Use two CR-123A batteries, standby for up to 5 years.
A text message will be sent to prompt the user to replace the battery, if low voltage occurs in
the battery of the main unit and accessories.
Initial Configuration Guidance for the Main Unit
Insert an activated SIM card that has been topped up in the SIM card slot in the battery
compartment of the main unit, and then load two CR123A batteries. By this time, the pairing
indicator light next to the SIM card slot in the main battery compartment flashes, which means
the main unit enters the state of searching network. When the above indicator light changes
from flashing to going off, indicating that the networking is successful. And now, press the
pairing button in the battery compartment to clear the configuration of the main unit before
pairing. The specific operation is as follows: long press the pairing button in the battery
compartment for 5 seconds, release the pairing button when the main unit makes 2 beeps, by
this time, the configuration of the main unit is cleared and the wireless accessories can be
paired. (All parts must be paired before using the set of devices)
①
② ③ ④ ⑤
Store alarm phone number
①Press the pairing button in the battery compartment, and the main unit will make a “beep”
sound. ②Meanwhile, the pairing indicator and alarm indicator light up.③Use the mobile
phone to dial the SIM card number of the alarm main unit; ④The light will flash after the main
unit receives the incoming call; ⑤Reply an SMS to the mobile phone. Repeat the following
operations by using different mobile phone numbers, and up to 8 alarm phones can be stored.
Change stored alarm phone number
Use the mobile phone number stored in the alarm main unit to edit the mobile phone number to
be changed and send it to the alarm main unit. After receiving the message, the pairing light of
the main unit will flash, and automatically reply a message of all the saved phone numbers,
indicating that the phone number has been changed successfully. (Note: The number to be
changed when changing the number must be a saved number and the TEL in front of the new
phone number must be uppercase)
Smoke detector mate:①Press the pairing button in the battery compartment of the main unit;
② the main unit will make a “beep” and the indicator will light up; ③Trigger the wireless
accessory-reinstall batteries; ④The main unit will give 1 “beep”, and the indicator light will
go out, indicating that the pairing is successful.
①
②
③ ④
In the same manner, you can pair 32 accessories (if the main unit makes 2 “beeps” when
loading the battery into the wireless accessory, indicating that the accessory has been paired
with the main unit).
Customizing accessories name
Working principle
The smoke detector mate should be installed in the basement \kitchen \bedroom \warehouse
and other places where fire may occur. The smoke detector mate should be installed next to
the smoke detector. The smoke detector mate will send the alarm signal to the disaster control
main unit according to an alarm sound made by the smoke detector when there is a fire in the
monitored area. Then the disaster control main unit will send an alarm message to the stored
alarm phone, and then it will dial all the stored alarm phones for warning. It will hang up
automatically after the phone is connected. Then the system will enter the state before the
alarm automatically after all the stored phones are dialed.
Add/clear wireless accessories
When the first paired wireless accessory alarms, it is displayed as SOS1 by default on the
mobile phone text message.
When the second paired wireless accessory alarm, it is displayed as SOS2 by default on the
mobile phone text message
And so on.
To clear the wireless accessory, press and hold the pairing button in the battery compartment
for 5 seconds. then release the pairing button when the main unit makes 2 “beeps” and all the
accessories paired with the main unit can be cleared.
Technical Parameters
Smoke detector mate:
During the premise of pairing all the accessories
①Use the mobile phone to edit the SMS: SOS1 Kitchen (Note: “ Kitchen” is a custom name)
which is sent to the alarm main unit;
②The alarm main unit receives the text message and replies it back to the phone indicating
it's cutomized successful.
You can customize other accessories' name by following up above process.
The normal working state can be entered after the above operation is completed.
Smart GSM alarm host (main unit)
Power: DC 6V(two 3V CR123A battery )
Volume: 90dB
Temperature: -10°C +55
Standby current: 170uA
GSM gateway:850 / 900 / 1800 / 1900MHz
°C
Installation of batteries
①
② ③
① Open the battery cover; ②Take the battery from the tools bag and put into the
battery compartment; ③Close the battery cover.
working frequency：868.35MHz/915MHz
working frequency：CE: 868.35MHz/FCC: 915MHz
Shenzhen Koochuwah Smart Technology Co.,Ltd
Infrared Detectors
Manual
KO-121X
Shenzhen Koochuwah Smart Technology Co.,Ltd
Manual
KO-131X
Smoke detector mate
Shenzhen Koochuwah Smart Technology Co.,Ltd
Manual
KO-201X
Smart night light doorbell(main unit)
Guangzhou Xinyang Electronic Technology Co., LTD
Manual
KO-202X
Smart GSM alarm host (main unit)