User's Manual

ManualsBrandsGuangzhou Xiangxing Electronic Technology ManualsElectronicsTPSensor Programmer

Table Of Contents

第 1

页

共

9 页

XiangXing Tire Pressure Programmer

XTP-SP800 User Manual

Product Description

This product has the characteristics of simple operation, stable performance,

wireless update, and portable. This product can be programmed with the matching

tire pressure sensors, the sensors after successful programming can be adapted to

the corresponding car model, this product can also be used to activate the original

tire pressure sensor. Download the update package required for the device update

in the WeChat applet of the mobile phone to update the device.

Product Function

1. Programming sensors

2. Check sensor

3. Activate sensor (the original tire pressure sensor can be activated)

4. Local storage (130 commonly used car models can be stored)

5. Remote update

Product Function Usage Instructions

一、 Programming sensors（Programmable 5 sensors at a

time）

1. Select the sensor ID generation method

Place the sensors to be programmed within 10cm of the device's

periphery. Select "PROGRAM" on the “HOME PAGE”of the device, and

then select the method of generating sensor ID.

ID generation method description：

※MANUAL CREATE ID：The user can manually modify the ID of the sensor in the

applet.

※AUTO CREATE ID：The sensor ID is automatically generated by the applet and

cannot be modified by the user.

Summary of content (10 pages)

PAGE 1
XiangXing Tire Pressure Programmer XTP-SP800 User Manual Product Description This product has the characteristics of simple operation, stable performance, wireless update, and portable. This product can be programmed with the matching tire pressure sensors, the sensors after successful programming can be adapted to the corresponding car model, this product can also be used to activate the original tire pressure sensor.
PAGE 2
PROGRAM SENSOR HOME PAGE MANUAL CREATE ID STORAGE PROGRAM ACTIVATE AUTO CREATE ID CHECK ABOUT OK BACK OK ②Select ID generation method ①Select PROGRAM 2. Search sensors Start searching for nearby sensors, click "LINK" after successful search. AUTO CREATE ID AUTO CREATE ID FIND SENSO LINK SENSO PRO SENSO Searching for XTECSAF sensors Please place the sensors in 10cm FIND SENSO LINK SENSO PRO SENSO BACK BACK ③Searching Sensor amount: 5 Sensor1:Voltage 3.
PAGE 3
10m and the device has sufficient power. ※Please do not operate your phone when downloading files, otherwise the link may be interrupted. AUTO CREATE ID AUTO CREATE ID FIND SENSO LINK SENSO PRO SENSO BACK Please turn on the Bluetooth of your phone and scan the QR code below with WeChat to link applet DeviceID 00000001 FIND SENSO LINK SENSO PRO SENSO BACK Please keep the distance between the device and the phone Transferring,please wait... ⑥Downloading files ⑤Link applet interface 4.
PAGE 4
display normal information can be used normally. Notice： ※The distance between the sensors to be programmed and the device should not exceed 10cm during programming. ※ The sensor with programming failure or error during programming is programming failure, and it can be used normally only after reprogramming.
PAGE 5
WeChat to scan the QR code of the link interface or search for "XTECSAF" in WeChat to enter the applet. In the applet, select the car model that needs "ACTIVATE", and wait for the car model information to be downloaded. ACTIVATE SENSOR ACTIVATE SENSOR Please turn on the Bluetooth of your phone and scan the QR code below with WeChat to link applet Please keep the distance between the device and the phone Transferring,please wait...
PAGE 6
LOCAL STORAGE HOME PAGE Remaining storage space:128 001 BHB637140 002 51839114 STORAGE PROGRAM ACTIVATE ABOUT CHECK OK BACK OK ②Select part number ①Select STORAGE 2. Select the operation to be performed. The functions of "AUTO CREATE ID", "MANUAL CREATE ID" and "ACTIVATE SENSOR" in "LOCAL STORAGE" do not need to link to the applet.
PAGE 7
ABOUT HOME PAGE Device Model: XTP-SP800 Device ID: 00000001 Device Area Code: 0000 STORAGE PROGRAM ACTIVATE CHECK Firmware Version: XTECSAF_M001_S001 Program Times: 10 ABOUT OK BACK UPDATE ②Click UPDATE ①Click ABOUT 2. Turn on the mobile phone's Bluetooth and positioning, use WeChat to scan the QR code of the link interface or search for "XTECSAF" in WeChat to enter the applet, click the "Firmware Update" button on the homepage of the applet to search for and connect to the device.
PAGE 8
Part1 updating,please wait... Part 1 update completed! 100% ④ ⑤ Common problem； 1、What does it mean when it prompts "Searched that the sensor area code does not match the device" when searching for the sensor？ Answer：The device only supports programming the sensors with the same area code. You can view the area code of the device on the "ABOUT" page, and use the "Check Sensor" function to view the area code of the sensor. 2、Can't search the Bluetooth of the device after entering the applet?？ Answer： a.
PAGE 9
Answer：The part number displayed in "ACTIVATE SENSOR" and the part number saved in "LOCAL STORAGE" are both the first part number in the part number information of the car model selected in the applet. Although the part numbers are different, their corresponding software is the same.
PAGE 10
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.