w walkers — EPR — Me -@i Note: Please read thoroughly tha manual before using ‘and keep Tin a safe pace for tha future Afrocentric.
MTG-01 with spread spectrum technology features automatically assigned ID and strong anti jamming characteristics. 14 Important Statements (1) The product is suitable for experienced helicopter modelers beyond 14 years old. (2) Fining the model aircraft in approved ground is a must. (3) Wa are not responsible for any safety caused by operation, usage or control as son as the product is sold out (4) Wa consign our distributors to offer technical support and saviors after sale.
(5) Away from heat sours Tha inside of the MT-01 is composed of many precise electronic components and mechanical parts. Keep it far away from heat sources and sunshine to avoid distortion, or even damage caused by high temperature. (6) Charger method Please use original USB wire connect with PC to charge the battery. — —— 23 hours (1) There is a 3.7V mahatma Li Po battery in the controller. The battery can be charged with the USB wire.
Download Software (1) Please download and install the RC-Copter software at Walker. ‘Official com ). (2) Press #8 and follow the steps to finish the Installation of the RC-Copter. (ONLY stable for above 2 0 version Android keystone) Note: The different hardware of Android phone may lead to the allure of using MT-01. Its totally based on the products which Yau are using. 6.
(1) Touch Screen Size Switch Key ~~ @ THROATILY stick @ Binding @ Help ® Throttle direction indicator! ® PIT curve Made Switch key @ DIR and Exponential @ Gravity sensor curve (® Interface rotation @ Throttle curve ® Binding Reset @® Setup @ Channel Display @ RUDDERLESS stick 63 Binding Plug the MT-01 to the audio jack of phone, and turn on the MTC01, the data transfer Indicator ls off after short green fishing, and the power Indicator keeps bite light Press Binding Icon In the fight control interface.
9.5 The Gravity Sensor notes of the controller Press Gravity Sensor on the controller interface, color Icon miens Active, and Grey Icon means Non Active.
Note: If a hart stop Is needed during fight, please press the Binding Kay In the fight control Interface. Both green light of the data transfer Indicator and bis light of power Indicator wil be solid at the same time. The aircraft will ba out of control if move the Control Stick In the fight Interface. The short stop could be removed by pressing the Binding Key slight. pA DLE Press | on the controller Interface, you oan set the Reverse, AUX Trim, Mode Switch, and Vibrates key.
74 Recover Al the settings will renew to factory settings when you Press this key. Note: In case of emergency (A sudden fight for the aircraft), please don't make the Mode switch after successful binding 7.5 Throttle curve Touch Icon fission the interface to enter throttle curve settings, Check below cloture. Point setting fang (1) Point Setting: Touch 443. + there are 7 different options piping up. Touch the point that need to be reset.
8.0 The Usage of mobile extended Nonoperational) (1) Paste the magic stickers separately at the back of MT-01 and mailer phone. i) m 9.0 MT-01 for WK Series radios function manual (1) MT-01 for WK Series WK-2402A, WK2403, WK-2602, WK-2603, WK-2801, WK-2801E, WK2801PRO) function: Connect MT-01 to simulated output signal socket In the WK series tradespeople refer to below Illustration, It could control the comes pond channel accelerate of dove series helicopters.
(3) Please fix the MT-01 onto the back of radio by using magic sticker. It could prevent the fight from poor contact between the plugs. (4) Binding: (4.1) Tum on the MT-01, ihe data transfer indicator light is off after short flashing, the power Indicator it Is Blue. (4.2) Prows on the radio, The binding Indicator s flashing In Blue light.
(4) Control Program IC upgrade by RF: Plug the line bidden with backfired and yellow Into the upgrade channel 3, Plug the line bidden with black red and BIA info the upgrade channel 4. brainchild and blue brainchild. and yellow Soto: When using the phone to control, please adjust the volume at maximum to inure the normal data transfer. Please don't adjust the volume after successful binding.
Modifications not authorized by the manufacturer may cold users authority to operate this device. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
lke FLOORWALKER PRODUCT The specifications of the R/C Product may be altered without notice.