RC HELICOPTER Jami QP ACHE 9.4 Adjustment of main rotor blades The aim of adjustment is to equalize the weight and center of gravity of the main rotor blades and to ensure the blades are at the same level when rotating. Correct adjustment of the blades reduces vibration which Improves performances and durability. 9.4.1 Color decal {tracking tape) Two different colored bide tracking decals (red and silver) should be placed 6 mm away from the end of each blade tip.
Iii cr RC HELICOPTER 9.4.4 Adjustment of blade tracking Below are the main causes for incorrect blade tracking: (1) The weights of two blades are unequal (2) The gravity center distribution of two blades Is unequal (3) The lengths of ball linkages of two blades are set Improperly. (4) When blades are too loose, blades shake due to gap, or main blade connectors distort.
Mode 1 (throttle stick at right hand) RC HELICOPTER Trivial CP o.55 1. When moving the aileron stick left or right, the helicopter accordingly flies left or right. 2. When moving the throttle stick up or down, the helicopter accordingly flies up or down. 3. When moving the rudder stick left or right, the head of helicopter accordingly rotates to the left or right, Mode 2 (throttle stick at left hand) 4. When moving the elevator stick up or down, the helicopter accordingly dies forward or backward. 1.
vaginal CP AC HELICOPTER she 1 Flight practice for the beginner batterers needing attention {1) Beginners should be supervised and guided by skilled pilots when leaning (2) For the sake of safety, people should keep at least 5 meters away from the helicopter during practice (3) Choose a spacious open ground without people and obstacles as the flight practice fled. (4) This is a 3D helicopter. We kindly suggest that the knowledge of flying 2D/ coaxial helicopter is a per-requisite before flying this model.