RC HELICOPTER I 8mi CP EAE In order to avoid confusion, the following sections will use the directions and orientations defined as follows. The helicopter is in front of the pilot with the tail boom and rotor closest to the pilot {tail in), the head or nose is facing forward (pointing away from the plot. The left hand of the pilot Is to the left side of the helicopter, the right hand of the implicit Is to the right aids of the helicopter. Its head/nose Is to the front and It's tall boom Is to the back.
If CP RC HELICOPTER 2H 5.1 radio) setting 5.1.1 Boost Screen Prevaricator Trotter ¥im Latin trim Transversal power apiary Rudder tim Dual rats and Modal many Allen vim exponential kon oon 5.1.2 Modal Selection Touch the shortcut icon § to enter Mode Menu, and then click the icon to enter the interface of Model Select. Select the desired item, and then click the icon to exit. 5.1.2 Model Selection 5.1.3 Model Name 5.1.
RC HELICOPTER dm GP Ar 6.1.6 Reverse Switch Touch the icon # to enter Function Menu, and then click the icon to enter the interface of Reverse Switch to set as below, and then click the Icon i to exit. 5.1.7 Dual Rate and Exponential Touch the icon’# to enter Function Menu, and then touch the icon @ to enter the interface of Dual Rate and Exponential. Below are the set values for each point, and then click to exit.
Ama CP AC HELICOPTER PA 4 6.1.10 Gyr sensor Touch the Icon “ to enter Function Menu, and then touch the Icon i to enter the interface of Gyro Sensor. Below are the set values for each point, and then click to exit 5.1.11 Sensor setting Sensor setting: Touch Icon {Jf to enter system menu, and Touch system sensor Icon {to ante Sensor Setting Interface. Touch Sensor Enable to expand navigation mark, there are Active and Inhibit two options.
HELICOPTER Izmir QGP Ar Touch icon to enter into Stern Menu and touch Sensor View Leon {5 to enter Sensor View interface 5.1.12 Save Tum off the DEVOLVES power, and all the setting data will be automatically saved. 5.2 radio) settings 5.2.1 Type:Helicopter 5.2.2 Swash type:1 Servo Normal 5.2.