deletion Welcome to use the DOVE 12E {transmitter 412 2.1 Mode! Select Press ENT to enter Main Menu and press make Mode! | Model Select Menu is selected. Press ENT to get the Model Menu and press select Mode! select, press ENT to enter the Mode Select Ir setting Interface. 2 ~% Model 2 Press select the mode! you desired, press ENT to confirm 3% Model 3 and the front of selected one. Total 30 medals are optional. 4% Model 4 Press EXT fo exit after finished.
deletion Eve TBE Welcome to use the DOVE 12E transmitter Press ENT to transmit, “Transmitting * appears In the Interface. Or press EXT to exit. Press EXT to exit after another DOVE 12E received the data. Mode! Transmit Le UE (2) Model receiving Crass ENT to enter Main Menu and press select Model Menu. Press ENT to enter Model Menu and press select Model Receiving, continue to press ENT to enter Model Receive setting interface. An inquiry information “Are you sure?” will be shown as below illustration.
deletion Welcome to use the DOVE 12E transmitter. Eve TEE 27 Trim System Trim System is able to finely tune the following six items, respectively: Elevator, Aileron, Rudder, Spoiler, Left Trim and Right Trim. The trim range is divided into 20 grades (factory default is set convenient to subtly modify the pitch by adjusting the trim range. Press ENT to enter Main Menu and press select Mode! Menu. Press ENT to enter and press select Tim System, press ENT to enter setting interface.
deletion Eve TBE Welcome to use the DOVE 12E transmitter Press ENT to enter Main Menu, press move navigation mark to select Model menu. Press ENT to enter Model menu function. Press Device select Option. Press ENT to Device select Option interface. Advice Select Fight Snead Switch (1) Flight Speed Switch: RITE Co | . Flight Launch Switch Press move navigation mark to Flight Speed Switch and | inhibit press select the desired switch. The factory default setting Lo is Inhibit.
deceleration Welcome to uss the DOVE 128 transmitter. DOVE 128 (2) Flap Press move navigational mark to Flap. Press Ror L to expand the menu including MOD SW, MIX SW, ELEV D/R, AIL D/R, RUDDY D/R, GEAR SW, SOPS SW, SPS 18W, SP SW, 8PS3 SW, Left Trim, Right Trim, AUX KB, AUX KB, AUX KB, AUX KB, Spoiler. The default setting is MIX SW. Function Setting: The default setting is Active. Devices Output Flap Function Active (3) AUX 2 Press move navigational mark to AUX.
deletion DOVE 12E Welcome to use the DOVE 12E transmitter (4.2) Mara setting: “Wing Type Press select “Mate Channels” setting, press Dual Channels select the desired channel in the menu with Inhibit and the inhibited channels previously set in “Device Output”. Elevator (4.3) Trim Setting: Press select “Trim Channels” setting, press select the item you want to choose as trim lever in the menu with Inhibit, Left trim, Right Trim, AUX KB, AUX KB, AUX KB, AUX KB.
deceleration Welcome to uss the DOVE 128 transmitter. DOVE 128 Press ENT after the new ID has been set. An inquiry interface of “Are you sure?” pop up. “ID Code Matching ce ” will be shown after — 1 press ENT. After matching, Fixed ID the interface will be resumed to Model Menu, Fixed ID (2) Fixed |D cancellation Insert the assorted BIND PLUG into the output terminal of BAT before the receiver power on, and then plug 5V DC power into other output terminal. The red light of receiver will flash slowly.
deletion EVE 18E Welcome to use the DOVE 12E transmitter (2.2) Textual V1 Press UP or DN enter to External V1 setting Interface. Press activate the V1, the details refers to the Illustration. Voltage Voltage Press select the External: V1 External: V1 Alarm Voltage setting. Press rm Active Ror L to set the value. The setting range is Alarm Voltage Alarm Voltage you can continue to set other a2v rrr items after you finished. (2.3) External: V2 setting can refer to External V1 setting.
Welcome to uss the DOVE 12E transmitter. deletion DEED 12E {4.3) Date Type Crass select the Date Type on the GPS setting interface and it includes DD: YY and Select the desired item. GPS Setting GPS Setting (4.4) Time Zone Eats Gyps Date Type Press select the Time Zone , press Ror L to Time Zone Time erm set the desired Time Zone. nen 3 0 Conclusion Menu Function Menu can help you custom adjustments for the selected models.
detention Welcome {0 use the DOVE 12E transmitter DOVE 12 3.3 Sub Trim Sub Trim can move the neutral point of the servo. But we advise you to mechanically adjust the servo bell crank if offset is far away from the neutral point of servo, because excessive usage of the sub tim may damage the servo. Setting method: Press ENT to enter Main Menu, Press move the navigation mark to select item Function Menu. Press ENT to enter Function Menu, Press select Sub trim, and press ENT to enter Sub Trim interface.