deletion Welcome to use the DOVE 12E transmitter DOVE 188 (5) Switch Selection When the item Throttle Stick is set in Inhibit, it is possible to switch between Pos 0 and Pos 1 by Switch. Press select “Switch®. Press ENT to enter Switch interface, press choose desired item. Press ENT to confirm, the desired item whose left side will be changed into “1” from “0”.
deletion Welcome to use the DOVE 12E transmitter DOVE 12E Pos § Down: Mix amount setting when elevator stick moved downward. Press move the navigational mark to select "Pos 0 Down" item. Press increase or decrease, separately, the mix amount. It is possible to reverse mix direction through changing the plus or minus sign before amount. The adjustable range is 125%. Pos 1 Up, Pos 1 Down setting method refer to Pos 0 Up setting .
deceleration Welcome to uss the DOVE 12E transmitter DOVE 12E (22) Slave channel setting Press move the navigational mark to select Slave option and press ENT to Slave interface. Press select the desired channel and press ENT to make a “v*. Press EXT to be back to Program Mix interface. {2 3) Position Position There have two postilions En 0 and Pos 1 Press “UP” or “DN" I h i Exponential "to select the desired L o position. off Lighted {2.
deletion DOVE ASE Welcome to use the DOVE 12E transmitter 3.18 Monitor This function can display the current status and positions of all the channels’ outputs, and check the current working status of each channel. Crass ENT io enter Main Menu, and then press move the navigational mark to select Function Menu Press ENT to enter the Function Menu and then press select servo Monitor and press ENT to enter the monster interface for checking the currant working status of aah channel. Pres EXT fo exit. 3.
Welcome to use the DOVE 12E transmitter. deletion EVD 128 (3) Rate Sensor:Show 2 different measured RPM value; Rate Sensor | Rate Sensor inhibit S000RPH Inhibit CORPORA {4) GPS Sensor:Press turn to GPS function, show located date, time, longitude, attitudes, altitude and speed; "GPS Sensor = 3° 23.7120 Inhibit North 22° 53.4805 Birth 3Tm Inhibit 0.0 kin 3.21 Trainer Two DOVE 12E transmitters working together can execute the draining function to meet the requirements for the beginner.
deletion EVE 12E Welcome to use the DOVE 12E transmitter (3) Usage method The training switch can be freely switchable between Left trim and Right trim. The default setting is Right trim. See the right illustration: During flight, if the trainer pushes Right Trim once, the linkage icon will be shown as that means the control right is moved to the trainee from Trainer.
deletion Eve TBE Welcome to use the DOVE 12E transmitter 10 System Menu All the functional settings, which are relative to the operation system of DOVE 12E itself, are fully integrated in System Menu. They include Language, Display, Buzzer, vibrator, Stick Mode, Stick Direction, Stick calibration, Battery, and About. Below is the boot screen of Glider: Elevator trim Spoiler stick tim Transmission power display die Battery volume d U k dep event ion 2.
deletion Comedic fo use the DOVE 12E {neurotransmitter 125 1.3 Buzzer warming Press ENT to the Main Menu, press select System Menu, then press ENT to System Menu. Press select “Buzzer” and press ENT to the Buzzer setting Interface. y 1} Status: There are On and off two status on the Buzzer interfaces. Pressing move the navigational mark to the status option. Press change the On or Off status. It includes Speller Stick Inhibit (2) Spo Spoiler stick, Knobs Midpoint and Tone items under the status is On.
deletion Eve TBE Welcome to use the DOVE 12E transmitter 1.6 Stick Direction Press ENT to Main Menu, press select System Menu, [ Stick Direction and then press ENT to the System Menu, press select Stick Direction, and press ENT to stick direction setting interface. Elevator Stick Direction: There are four items available as Elevator, Aileron, Ene Spoiler and Rudder. Press select the stick which will Aileron change direction, and press change the direction.