Welcome to uss the DOVE 12E transmitter. deletion DEED 12E {4) Exponential Press move the navigation mark to select Exponential. It's possible to change Dual Rate and Exponential value in Pos when pressing change the value. There are + 100% and Line three adjustment. At the same time, the corresponding curve will be Exponential changed and shown at the right graph.
deletion EVE 18E Welcome to use the DOVE 12E transmitter 3.6 Flapper Mix This function is used to Mix Aileron to Flapper, or Mix Elevator to Flapper. The Mix amount can be independently set in each flight mode. The Flap Rate in each flight mode should be previously set before using this function. Refer to the following "3.16 Flap Rate". Setting method: Press ENT to enter Main Menu; Press move the navigation mark to Function Menu, and press ENT to enter Function Menu.
Welcome to uss the DOVE 12E transmitter deletion DEED 12E {1} Flap Lever Offset setting The flight mode should be previously activated In "Device Select” before using this function (Refer to "2.9 Device Select”). Press move the Navigation mark to select “Flight Mode” setting options, press select the desired item. (2) L-Aileron/ R Aileron setting Press move the Navigation mark to choose “L -Aileron or R-Aileron” setting options. Press change the position of L-Aileron or R-Aileron with a range of 100%.
deletion DOVE 128 Welcomes fo use the DOVE 12E transmitter {1} Channel: current setting channel is Aileron. System default can not be set. Balance (2) Paint parameter adjustment Point< Right Setting: Press choose “Point< Right”. If need to adjust the value, press L {0% means no adjusting). A minus value means the amending direction is downward; press R to adjust value(0% means no adjusting}. A plus value means the amending direction is upward. The adjustable range is + 100%.
Welcome to uss the DOVE 128 transmitter. deceleration DOVE 12E 3.11 Rudder to Speller Mix When this function Is activated, the speller can be used as Rudder In the models without Rudder and can also be mixed. The mix gain can be independently set in each flight mode, which should be previously set at Device Select in Model Menu (Refer to "2.9 Device Select"), and "Dual Spoilers” should also be activated at Wing Type (Refer to "2.11 Wing Type"). Rudder to Spoiler.
deletion DOVE 18E Welcome to use the DOVE 12E transmitter 3.13 Elevator to Flap Mix This function aims at mixing flap when operating elevator stick. It can be respectively set in each flight mode, which should ba previously set at Device Select in Mode Menu {Refer to "2.9 Advice Select. Setting method: Press ENT to enter Main Menu; Press move the navigation Cruise Mode | mark to Function Menu, and press ENT to enter Function Menu.
deceleration Welcome to uss the DOVE 128 transmitter. DOVE 128 3.15 Aileron to Tip Aileron Mix This function aims at mixing Tip-Aileron when operating Flap. it can be respectively set in each flight mode. But the flight mode should be previously set at Advice Select in Mode Menu (Refer to "2.9 Device Select”), and the Tip-Aileron should also be activated at Wing Type in Mode Menu (Refer to "2.11 Wing Type™).
deletion DOVE 128 Welcomes fo use the DOVE 12E transmitter 3.17 Brake System Through the spoiler stick operation, all the actions caused by mobile wings in main wings will be muted into the mix which aims at brake. It can be switched between Pos 0 and Pos 1 via setting the item switch, Setting method: | Brake System Press ENT fo enter Main Menu; Press moves the navigation mark to Function Menu, and press ENT to enter Function Menu. Press choose Brake System and Press ENT to enter Brake System interface.
Welcome to uss the DOVE 128 transmitter. deceleration DOVE 12E 3.18 Program mix There are 8 series of program mix, mix channels and values are adjustable. Seeing Method: Pres ENT enter to Main Menu. Press UP or DN select function, press ENT to enter function menu, then press UP or DN select "Program Mix". And press ENT to program Mix setting and comment status (default suiting is “Inhibit’} interface. Press chooses Inhibit, Normal or Curve.
