Welcome to use the DEVOLVES transmitter. d Mention DOVE-85 {2.3) Flight mode selection All the flight modes are shown in the right interface which includes Flight Mode 0, Flight Mode 1,and Flight Mode 2 Click the left or right navigation mark of the fight mode, which you want to automatically adjust, to decrease or Increase the amount of gyro gains, respectively. If the gyro you uss has two modes of NOR or VACS, when the amount Is less than 50.0%, NOR mode will be activated.
deletion DOVE BS (2) Pos 1 setting The setting is same as above. (3) Throttle stick setting The switch between Pos @ and Pos 1 can be realized by setting the position of throttle stick. Touch the left or right navigation mark of Throttle Stick to set the position amount of throttle stick. The default setting is Inhibit. The adjustable range is Welcome to use the DEVOLVES transmitter {4) Switch setting Touch the navigation mark of Switch and expand a drop down menu Including some delectable Items.
Welcome to use the DEVOLVES welcome deletion 3.13 Rudder to Ailsron/Elevator Mix Whig function is used to execute the mix of rudder to aileron/ elevator. It will help eliminate waver or shake caused by rudder stick operation. Setting method: Touch the Icon i=. to enter Function Menu, and then click 2. to enter the elevator to alleron/elevator mix Interface. (1) Elevator setting {1.
deletion RAL Welcome to use the DEVOTEES transmitter (1) Elevator setting There three options: 0: Normal, 1: Midpoint, and 2: Land. (1.1) 0: Normal position Touch the navigation mark of Normal to change the mix amount. It is possible to change the direction by altering D or U before the amount. The default setting is 0%, and the adjustable range is U125% to D125%. {1.2) 1: Midpoint The setting Is same as above. Land The setting is same as above. {2) Flap setting The setting for Flap is same as Elevator.
Welcome to use the DEVOLVES transmitter. d Benton DOVE-85 3.15 Alison to Flap Mix This function can execute the mix of aileron to flap, and can also set switch. The flap dual channels should be previously set in Wing Type at Model Menu (Refer to “2.10 Wing Type”). Setting method: Touch the con “= to ante Function Menu, and then click the Icon: to enter the allusion to flap mix Interface.
deletion aT Welcome to use the DEVOLVES transmitter 3.18 Program Mix There are total alight sets of Program Mix. It Is possible to freely set the channels and amounts which you want to select and amend, respectively. Setting method: Touch the Icon #4: to enter Function Menu, and then clerk {i to enter the program mix Interface. Eight Program Mix names and their current statuses are shown (the factory default setting Is Inhibit). Take Program Mix 1 as an example to show how to use.
Welcome to use the DEVOLVES welcome deletion (1.3) Galen setting Take Elevator at Master as an sample. Mix amount setting at Pos 0 when elevator stick moved upward Touch left or Eight navigation mark of Up to decrease or Increase, separately, the mb amount. It Is possible to reverse mix direction through changing the plus or minus sign before amount. The adjustable range Is 125%.
deletion DEVOLVES (2.3) Position selection There are two options: Pos 0 and Pos 1. Select the desired position by touching the navigation mark. (2.4) Exponential Touch the navigation mark of Exponential and expand a drop down menu with two options of Off and On. The pitch curve will be smoothly changed if choosing On. Otherwise choosing Off. (2.5) Point setting Touch the navigation mark of Point and expand a drop down menu with nine points.
Welcome to use the DEVOLVES welcome deletion 3.18 Fall Safe There are two possibilities for use if the transmission signal is under abnormal condition. The first one is to lock the last action data received; the second one is to execute the per-set data which is per-set. The default setting is Servo Hold Setting method: Touch the icon i to enter Function Menu, and then click §ii: to enter the interface of Fail Safe. Take the item Elevator as an example to explain.
deletion DOVE ES Welcome to use the DEVOLVES transmitter 3.19 Trainer Two DEVOLVES transmitters working together can execute the training function to nest the requirements for the beginner. The setting method is shown as below: Setting method: (1) Data copy Using the wireless copy function of the two DEVOLVES transmitters, the mode! data saved in the trainer's transmitter can be transmitted to the naturalness's to ensure the mods! parameters are exactly same.
Welcome to use the DEVOLVES SO (3) Usage method The training switch can be freely switchable between Left trim and Right trim. The default setting is Right trim. Shown as below: During flight, if the trainer pushes Right Trim once, the linkage icon will be shown as *" that means the control right Is moved to the trainee from Trainer. If trainer pushes Right Trim once again, the linkage Icon will be shown as “X that means the trainer takes back the control right from the trainee.
deletion DOVE BS Welcome to use the DEVOLVES transmitter Ratting method: Touch the icon 4 to enter Function Menu, and then click the icon £23 to enter the interface of Timer. {1) Setting for Timer 1 (1.1) Timer 1 setting Touch the navigation mark of Timer 1 and expand a drop down of Stopwatch and Countdown. Select the desired timing method. The timing range of stopwatch is from 0 to 59:58 (59 minutes 58 seconds) Stopwatch view Take countdown manner as an example to explain. (1.
