Welcome to use the DOVE-85 vo dandelion (2) Setting method for Curve in Program Mix Touch the item Curve in Program Mix 1 and expands an inquiry “All Servos Hold?" Gimmick OK for all the servos will be locked at the current statuses; lick Cancel for unpicked. Enter the next interface after clicking. (2.1) Master channel setting Touch the navigation mark of Master and expand a delectable drop down menu. Select the desired channel and Its name will be shown In Master.
detention DOVE-85 Setting method: Touch the icon i to enter Function Menu, and then click i to enter the fail safe interface Take the item Elevator as an example to explain. Welcome to use the DEVOLVES transmitter Elevator setting: Touch the tem Elevator and expand a sub-item In lts right. Click the left or right navigation mark to decrease or Increases, respectively, the position amount which centers on the neutral paint of servo. The setting methods for other channels are same as above.
deletion Welcome to use the DEVOLVES transmitter. “Two ends of digital signal wire” Training status display: when the trainer's Icon tums Into “X", the trained stops flying and the trainer Is working; when the trainer's icon tums into the trained is flying and the trainer is in Leisure. working] ner is off (3) Usage method The training switch ks lef timing button of right timing button (can choose by yourselves)the factory setting is right riming button.
detention DOVE 85 Welcome to use the DEVOLVES transmitter 3.16 Timer There are two timers which can be set as stopwatch and countdown, respectively. The running, stop, or clearance of each timer can be operated by setting switch or by touching the shortcut Icon. Setting method: Touch the Icon to enter Function Menu, and then click the Icon £3 to enter the timer Interface. Stopwatch view Countdown view Take countdown manner as an example to explain: (1) Setting for Timer 1 (1.
de lion DOVE-85 The boot screen of airplane is shown as below: Welcome to use the DEVOLVES transmitter Thoth trim Elevator trim Flap trim left Fiat tim right Transmission power display Battery volume display Fight mods; Model name Timer. Timer. Function menu icon Throttle percentage val System many loan Rudder trim Throttle Dual rate and Mode! Aileron rim curve loon exponential menu icon n 1.1 Language Setting Touch the shootout icon £3 to enter System Menu and then touch {53 to enter Language.
deletion Welcome to use the DEVOLVES transmitter DOVE-8% (3) Power save Lima: It can adjust the back lighting duration by fuming off the fightback In order to prolong the battery cruse time. The setting status contents Always On and duration In 30 grades with an Interval of 1 minute. Touch {x to ext. 1.3 Buzzer Naming Touch the Icon {i to enter System Menu and then touch #i to enter Buzzer Interface.
de lion DOVE-85 Welcome to use the DEVOLVES transmitter 1.6 Stick Calibration Touch the Icon {J to enter System Menu and then touch the Icon ij to enter Stick Calibration. There are two items in the interface: Stick Direction and Stick Calibration. (1) Stick direction: there are four options: Elevator, Aileron, Throttle, and Rudder. Click the Item, which you want to reverse, to change the output direction of the stick. The default setting is Normal.
Welcome to use the DOVE-85 or dereliction DOVE-8% 1.7 About Touch the Leon {i to enter System Menu and then touch i to get access to the about Interface. You can check the versions of hardware and software. Click the Icon £4 10 ext. 2 0 Mode| Menu Model Menu manages all the model data saved in DEVOLVES. It includes Model Select, Model Name, Mode! Copy, Model Transmit, Mode! Receive, Model Reset, Type Select, Trim System, Device Select, Device Output, Wing Type,Power Amplifier and Fixed ID. 2.
deletion eas Welcome to use the DEVOLVES transmitter Click the right blank frame of Name and a gray stripe will be shown In the frame. Touch the return key 1 to clear up the old name Touch the soft keyboard to Input & new name. It Is possible to switch between lowercase and uppercase by clicking the key iii: Then touch Toeing exit 2.3 Model Copy Touch the icon {Jj to enter Model Menu and click bonito enter Modal Copy. Choose the model you want to be copied as source model. The serial No.
deletion Welcome to use the DEVOLVES transmitter DOVE-65 Choose the source mode! which will be transmitted. The serial No. and name of the source model will ba shown under Select Model in Sift side of the interface as well as inquiry information “Ars you sure?” in the right side. Lick OK for transmission or Cancel for rejection. Inquiry information “Transmitting * appears after clicking OK. Touch the icon £4 to exit.
detention Welcome to use the DEVOLVES transmitter DEVOLVE 2.5 Mods! Reset All the model data can be restored to factory settings via Model Reset. Touch the Leon Jj to enter Model Menu and then click #4 to enter Model Reset. It is possible to store up fo 12 models data in the model list of DEVOLVES equipment. There are two methods to reset the model data: batch reset and single reset. Reset all the Scroll Rasta single model (1) Method for batch reset Touch "All Models” In Model Reset Interface.
deletion Welcome to use the DEVOLVES transmitter DOVE-85 2.7 Trim System Trim System is able to finely tune the following six items, respectively: elevator, aileron, rudder, throttle, left trim, and right tim. The trim range is covered from 1 to 20 grades (factory default is set at 4). Iris convenient to subtly modify the pitch by adjusting the trim range. Touch the icon Ei to enter Model Menu and then click to enter Trim System Touch the corresponding navigation mark fo change the trim value.
detention DOVE-85 2.9 Advice Output Device output is composed of four items. It can set up output switches and select the usage of trim, respectively. It can also activate, inhibit or use other functions. Friendly reminder: This function is frequently utilized in flights. Modelers will be greatly favored if expertly mastering its usage. Setting method: Touch the §icon to enter Model Menu and then click f# to enter Device Output. Welcome to use the DEVOLVES transmitter There are four items to be adjustable.