deletion ar Welcome to use the DEVOLVES transmitter DEVOLVES also needs to make relative cancellation and revision after the fixed ID in receiver is cleared out. In the main interface touch the icon Ki to enter Mods! Menu and then touch i to enter Fixed ID. Touch ID Code Setting to expand the navigation mark into status On and Off. Touch Off. Then touch ito exit. Ely Ellen e Bl pet e Tec It is important fo correctly mount your remote control system in your model.
Mention DOVE-85 All the functional settings, which are relative to the operation system of DEVOLVES itself, are fully integrated in System Menu. They include Language, Display, Buzzer, Touch Screen Calibration, Stick Mode, Stick Calibration , and About.
Welcome to use the DEVOLVES meme deletion (2) Fightback time out: It Is possible to set the duration which LCD stays at highlight In the form of "Always on” or any period from 5 to 60 seconds with an Interval of § seconds. (3) Power save time: it can adjust the back lighting duration by muting off the back light in order to prolong the battery cruse ime. The setting status contents Always On and duration In 30 grades with an Interval of 1 minute. Touch fy to exit. 1.
Welcome to usa the DEVOLVES transmitter 1.6 Stick Calibration Touch the con {gi to enter System Menu and then touch the Icon [1 to enter the Interface of Stick Calibration. There are two items in the interface: Stick Direction and Stick Calibration. (1) Stick direction: there are four options: Elevator, Aileron, Throttle, and Rudder. Click the item, which you want to reverse, to change the output direction of the stick. The default setting Is Normal.
Welcome to use the DEVOLVES transmitter 1.7 About Touch the Icon §§ to enter System Menu and then touch | to get access to the about Interface. You can check the versions of hardware and software. Click the Leon Eid to exit. [2.0 Model Menu Model Menu manages all the model data saved In DEVOLVES. It Includes Modal Select, Model Name, Model Copy, Mode! Transmit, Model Receive, Model Reset, Type Select, Trim System, Device Select, Device Output, Swash Type, Prows Amplifier Fixed ID 2.
deletion Welcome to uss the DEVOLVES transmitter Click the right blank frame of Name and a gray strips will be shown In the frame. Touch the rectum key 4 io clear up the old name. Touch the soft keyboard to input a new name. It is possible to switch between lowercase and uppercase by clicking the key i354: Then touching to exit 2.3 Model Copy Touch the Leon {Jj to enter Model Menu and click i ito enter Model Copy. Choose the modal you want to be cooled as source model. The serial No.
deletion Welcome to use the DEVOLVES transmitter DOVE-8% Choose the source mods! which will be transmitted. The serial No. and name of the source mods! will be shown under Select Model! in left side of the interface as well as inquiry information “Are you sure?” in the right side. Click OK for transmission or Cancel for rejection. Inquiry information “Transmitting . .. appears after clicking OK.
Slr 2.5 Model Reset All the model data can be restored to factory settings via Model Reset Touch the icon £jj to enter Mode! Menu and then click ji to enter Mode! Reset. Iris possible to store up to 12 models data in the mods! list of DEVOLVES equipment. There are two methods to reset the mode! data: batch reset and single reset. Reset al the Scroll Welcome to use the DEVOLVES transmitter Reset single mode! (1) Method for batch reset: Touch "All Models’ In Mode! Reset Interface.
Welcome to use the DEVOLVES oo deletion DEVOLVES 2.7 Trim System Trim System is able to finely tuns the following six items, respectively: Elevator, Aileron, Rudder, Throttle, Left Trim, and Right Trim. The trim range is divided into 20 grades (factory default is set convenient to subtly modify the pitch by adjusting the trim range. Touch the icon {5 to enter Model Menu and then cock i to enter Trim System Touch the corresponding navigation mark to change the tim value.
deletion Welcome to usa the DEVOLVES transmitter 2.8 Advice Output Device output is composed of four items. It can set up the output switches and select the usage of trims, respectively. It can also activate, inhibit or use other functions. Friendly reminder: This function is frequently utilized in flights. Modelers will be greatly favored if expertly mastering its usage. Setting method: Touch the icon {Jj to enter Model Mani and then click £¥ to enter the device output interface.
d of on Welcome to use the DEVOLVES transmitter © DOVE: (4)AUX3 Tough the Sift column navigation mark of AUX 3, and expands a list including MOD SW, MIX SW, ELEV DR, AILED/R, RUDDER, GEAR SW. Touch the desired item, The default setting is RUDDER. Click the right column navigation mark of AUX, and see an expansion list including Inhibit, Active, Gyro, and Governor. Choose the desired item. The factory fault setting is Active. Then continue to set up other items. Click the icon &y to exit.
fondle 2.11 Power Amplifier The transmission output power of DEVOLVES is adjustable. Its valid to set different wattage for different modal. it Is divided Into six grades from small to big. The lower the transmission output power transmits, the shorter the radio range is, and the longer the stand-by time will be. The higher the transmission output power, the darer the radio range, and the shorter the stand-by time.
Welcome to use the DEVOLVES oo deletion DOVE-85 The new ID digits can be modified by touching the mink soft keyboard. Then touch Match after the new ID Is already set. An Inquiry Interface of “Are you sure?” pops up. “ID Code Match..." will ba shown fairs touching OK. (2) Fixed ID cancellation Insert the assorted BIND PLUG Into the output terminal of BAT before the receiver Is powered on, and then plug 5V DC power into one of the other output terminals. The red light of receiver will flash slowly.