Contents Part one: General [formation 1.0 General Information «vss pressers see 1.4 Important 1.2 Safety needing attention. +2 1.3 Attention before fights see 2.1 Features of sd 2.2 Features of RX801 +eeecerrrceccced 3.0 Specification... 3.1 DOVE-85 specifications addressees +3 3.2 Calvert specification: ceaselessness 4.0 Definition of dg precancerous 41 Panel definition od 4.2 Rear definition. vsseessseeernnene sd 4.3 Wiring diagram «ess prepossesses ses 4.4 Function Keys In +5 5.
d Venation Welcome to use the DEVOLVES transmitter eC Gen 1.1 Important statements (1) The transmitter is suitable for experienced radio controlled aircraft modelers beyond 14 years old. (2) Flying the mode! aircraft in approved ground is a must. (3) We are not responsible for any safety caused by operation, usage or control as soon as the transmitter Is sold out. (4) We consign our distributors to offer technical support and service after sale.
Welcome to use the DEVOLVES we deletion DEG-85 {3) Strictly obey the order of TURN-ON and TURN-OFF before operation. When starting your flight, tum on ‘your DEVOLVES first, and connect the battery to the aircraft later. When muting off the aircraft, disconnect the battery first, and tum off your DEVOLVES later. An upset In the order may cause your aircraft out of control. Cultivate a compactor habit of turn-on and tum-off.
d Mention 4.0 Definition of DOVE 8S 4.1 Panel definition Welcome to use the DEVOLVES transmitter Flannelette detrimental stick: Eyelet RUDDY trim EXT up+ DN 4.
detention Welcome to use the DEVOLVES transmitter DOVE ES 4.3 Wiring diagram Antenna. oO Rudder servo Oo oO Charge Jack 4.4 Function keys In panel There are 6 functional keys In the panel of DEVOLVES. Barlow are the details: {1) EXT: Resetting key. Press EXT to exit the menu. {2) ENT: Confirmation key. Press ENT to get access to tha system or the function mods. (8) UP+: Function-selecting kay. Move cursor up to the forward function item. (4) DN-: Function-selecting key.
deletion DOVE-85 5.2 Control stick tension adjustment Clockwise rotate the stick tension screw through the regulation hole in the rear panel of DEVOLVES for tightening the tension of the corresponding stick by a Phillips screwdriver, and counterclockwise rotate the stick tension screw for loosening the tension Welcome to use the DEVOLVES transmitter One stick tension screw inside sate hols 6.0 Neck strap usage There is a hook in the face panel of DEVOLVES. The back strap can be connected to the hook.
Welcome to use the DEVOLVES transmitter. MODE 2 MODE 4 Left-hand stick includes MODE 2 and MODE 4. 8 0 Switches between left-hand and right-hand throttles The throttle switches between the left hand and right hand will be successful if both the MECHANICAL switch and ELECTRONIC switch are finished, separately. Below are the methods for switching. 8.1 Right-hand throttle switched to left-hand throttle (1) MECHANICAL switch Open the battery compartment cover in the rear of your DEVOLVES.
deletion ~—Doevaes Welcome to use the DEVOLVES transmitter Barlow are shown the inside views of left and right throttle sets, respectively. Use cross screwdriver to loosen and remove Linkage Fixed Screw, Screw F, Screw G, and Throttle Control Spring in right throttle set, respectively, and then mount them in the corresponding positions in left throttle set. And then adjust the stick tension according to your halt.
Welcome to use the DEVOLVES seem deletion Linkage Fixed Screw F Throttle Control § (2) The data switch Touch the shortest Icon{i to enter System Menu, and then touch the con i to access to Stick Mode. The model data will be automatically switched when touching MODE 1 or MODE 3. Tha Chieftain right-stick positions are shown, respectively, In the (wore right comer when MODE 1 Is selected. Tha left and right-stick positions are shown, respectively when MODE 3 Is selected.
deletion EVE 85 Welcome to use the DEVOLVES transmitter ‘Turn on the power of the trainer's DEVOLVES. Find out the trainee's model data, and then let the trainer's DEVOID bind with the helicopter made! and fly It normally. Then tum off the power. Insert the other end of the digital signal wits Into the trainer's DEVOLVES, and then tum on Its power.
Welcome to use the DEVOLVES This setting will bind DEVOLVES with its receiver in a unique commissioning relationship. It will greatly speed up the time of automatic binding when DOVE-88 powered on. (1) Setting for fixed ID The setting for fixed ID should be under the status that automatic ID binding is successfully finished. Below is the setting method. Touch the icon Ei to enter Mode! Menu, and then enter Fixed ID by touching the Model Menu.