detention DOVE B 3.8 Gyro sensor This function offers the gain adjustment for gyro sensor, which can be manually set through IVR switches or Flight mode switch, and also is possible 5 be automatically switched among various gains through Tight mode switch. (The flight mode shooed be activated. Refer to "2.8 Device select”). Sating method: Touch the Leon I to enter Function Menu, and then touch the icon to enter gym sensor interface. Welcome to use the DOVE-6 transmitter {1} Manual selling so {1.
detention EVE 8 Welcomes to use the DOVE-S Transmitter 3.10 Aileron to Rudder Rix This function is possible to execute the mix of aileron fo rudder, which is controlled by switch. Gatling method: Touch the icon | || to enter Function Menu, and then click the icon Hie stern the aileron fo rudder mix interface. {1} Pas 0 Setting Touch the loft or right navigation mark of Left fo change the value, and leftward mix value of aileron to rudder will be changed.
devotion DOVE 8 {2} Pos 1 sealing The sating Is same as above. {3} Throttle slick selling The switch between Pos § and Pos 1 can be realized by sating the position of throttle stick. Touch the TEFL or right navigation mark of Throttle Stick io set the position amount of throttle stick. The default setting is Inhibit. The adjustable ranges is Welcomes fo use the DOVE-8 transmitter {4} Switch sating Touch the navigation mark of Switch and expand a drop down menu Including some tractable rems.
detention DOVE B Welcome to use the DOVE-8 transmitter 3.4% Flap system This function can modify some effects on elevator, [tis possible to set three statuses of elevator and three statuses of flap, respectively, through three-way flap control switch, Setting method: Touch the icon bo enter Function Menu, and then click the icon | to enter Flap System. {1} Elevator setting Hers three options: 0: Normal, 1; Midpoint, and 2: Land, {1.
deletion DOVE 8 Welcome to uss the DOVE-8 transmitter {3.1} Thrall stick position siting Touch the navigation mark of Throttle to set the hottie stick position. The adjustable range iz (3.2) Flight mode selling Auden landing switch can ba set in a certain flight mode. This sating should ba previously sat in Wing Type at Model Menu. Refer to "2.10 Wing Type”. Touch the navigation mark of the selected fight mode, and pops up a menu with Switch, Normal, Midpoint, and Lard.
Welcome to use the DOVE-8 transmitter borderline DEED 8 {4} Switch seeing Touch the navigation mark of Switch and sap and a spelldown menu including some searchable elms. Click the desired tem and "0" before the item will be changed into “1°. if two or more elms are selected, the item And should be selected. Then touch the navigation mark to return back. Click the can fig eat 3.18 Program mix There are total sight sets of Program Mix.
deletion DOVE 8 Welcome to uss the DOVE-8 transmitter {1.2} Slave channel! selling Touch the navigation mark of Slave and expands a searchable drop down menu, Lick the desired channel which will be shown in Slave. {1.3) Gain selling The item Gain includes Pos posts 1,and Offset. Take Elevator at Master as an sample. Mix amount setting al Pos 0 when elevator stick moved upward Tech left or right navigation mark of Up fo decrease or Increase, separately, the mix amount.
detention Welcome to uss the DOVE-6 transmitter BEV 8 (2.2) Slave channel sailing Touch the navigation mark of Slave and expand a delectable drop down menu. Select the desired channel and fs name will be shown in Slave, Click the navigation mark of Master to rectum Io the Program MIX 1 Interface. {2.3} Position selection Then: ams two options: Pos 0 and Pos 1. Select the desired position by touching the navigation mark. {2.
deletion PEE 6 Welcome to uss the DOVE-8 transmitter 3.47 Fall safe There are two possibilities for use If the transmission signal l8 under abnormal condition. The fist one is to lock the last action data received; the second one is fo execute the per-set Dada which is per-set, The default setting is Serve Hold. Salting method: Touch the icon’ 4 to enter Function Menu, and then click (i to enter the interface of Fall Safe. Takes the Kem Elevator as an example fo explain.
detention EVE 8 Welcomes to use the DOVE-S Transmitter Instar the other and of the digital signal wire into the trainer's DOVE-8, and then bam on iis power. A linkage icon will be shown ag below: “Two ends of digital signal wire’ Training status display: when the trainer's icon becomes into X7, the trained stops flying and the trainer is working; when the drainer's icon tums into *V", the trainee is flying and the trainer is in leisure. {3} Usage method The training switch can be freely searchable.
detention BEE Welcome to use the Neurotransmitter 3.18 Timer There ams two rems which can be set as stopwatch and countdown, respectively. Each limes can be operated by switch or by shortest. Sating method: Touch the icon to enter Function Menu, and then click the fen fo enter the interface of Timer. {1} Ratting for Timer 1 {1.1} Timer 1 setting Touch the navigation mark of Timer 1 and expand a drop down of Stopwatch and Countdown. Select the desired timing method.
FOL Intimation eo Co TnRNING hm Benda amen Tans nis babi vide i ae ipsielie nie don inde dee i min Be ail Eph ce ee Thai Zo ROBE Te Teo Schins apin we Thee ben ale dpe lens Beet wen Damian int Bee Bae he hit deinen il mb RE ron elu he dnc Ba uid Bsn 1 en AER Re Eee Le ene Delos deins nnd Bal nn ene hee He Hamed led eal fel be hab ae nl