Welcome to use the DOVE-10 transmitter ~~ deletion DEVQ-1Q {4.5) Switch Selection ‘When the fem Throttle Stick Is sst In Inhibit, It Is possible to switch between Pos 0 and Pos 1 by Switch. Press select “Switch” . Press ENT to enter into Switch selection interface, press choose desired item. Press ENT, the desired item whoa left side will be changed into “1” from “0. If two or more items are selected, the item And should be chosen, whose left side should be changed into “1” from “0°.
deletion DOVE-10 Welcome to use the DOVE-10 transmitter (1.4) Switch selection Iris possible to switch by Setting Switch when differential is in use Cross choose Switch, press ENT to enter Interface of Switch selection, pass choose desired item. Press ENT, he desired item whose left side wil ba changed into “1° from “0. If two or more items are selected, the item And should be chosen, whose left dice should be changed into “1” from “0”. Press EXT after finished it.
detention DEVQ-1Q Welcome to use the DOVE-10 transmitter (3.3) Switch selection It Is possible to switch by Setting Switch when differential Is In use. Crass chooses Switch, press ENT to enter Interface of Switch selection, press choose desired item. Crass ENT, the desired tam whose left side wil be changed into “1” from “0”. If two or more items are selected, the item And should be chosen, whose left dice should be changed into “1” from “0%. Press EXT after finished it. faultfinder i Foe i Sail Bon 3.
deletion DOVE-10 3.8 Gyro sensor Welcomes to uss the DOVE-10 transmitter This function offers the gain adjustment for gyro sensor, which can ba manually set through D/R switches or Flight mode switch, and also Is possible to ba automatically switched among various gains through flight mode switch. (The flight mode should be activated. Refer to “2.9 Devi's Select”). Setting method: Press ENT to enter Main menu; Press choose Function menu.
detention DEVQ-1Q Welcome to use the DOVE-10 transmitter 3.10 Governor Before setup this function, “Governor” should be set and activated In “Device output” Interface. (Refer to 2.10 Device Output) The control proportion of governor can be separately set in various flight modes. For the absolute revolution amount, please set in textual governor. The amount shown in DOVE-10 governor is just a percentage for reappearance. The actual revolution should be read In the external governor.
deletion DOVE-10 Welcomes to uss the DOVE-10 transmitter (5) Switch setting The switch wil display ths current switch position. pass select the desired Item press ENT to the setting Interface and “0” before the Item will be changed Into “1”. If two or more Items are selected, the item And should be selected. Press EXT to exit after finished silencer to Boise di Thad Bhp inhibit wall fa 3.12 Elevator to flap mix This function is used to execute the mix of elevator to flap.
deletion DEVQ-1Q Welcome to use the DOVE-10 transmitter 3.13 Rudder to allaron/elevator mix This function Is used to execute the mix of rudder to allsron/elsvator .It will help eliminate waver or shake caused by rudder stick operation. Setting method: Hinder ly financier Ao Press ENT to enter Man Menu In the man Interface,and E | chain ail press make the navigation mark choose “Function ENT to enter “Function Menu" then = .
deletion DOVE-10 Welcomes to uss the DOVE-10 transmitter (1) Elevator setting Fla Dona a ee There are 3 options:0:Normal; midpoint and 2:Land. Elevate If Mona) wt (1.1) Elevator 0:Normal position press make the navigation mark choose . “Elevator press change the :. ‘elevator mix amount iris possible to change the direction by altering U or D before the amount The default setting 5 is the adjustable range is U125% D125%. {1.2) Midpoint position:Please refer to “1.1 Elevator {1.
deletion DEVQ-1Q Welcome to use the DOVE-10 transmitter {1) Pos 0 to leftward setting Press make navigation mark dissect” Pos 0 o leftward change the leftward mix value of antiviral to flap,the mix direction will be revised by changing the sign of plus or minus before the values the adjustable range is £125% {2) Pos 0 to rightward setting press make navigation mark select” Pos 0 o rightward change the rightward mix value of ailment to apathetic mix direction will be revised by changing the sign of plus or m