detention DOVE-10 Welcome to use the DOVE-10 transmitter Trainee is off and trainer is working Trainee is working and trainer is off Trainer icon Training status display: when the trainer's icon becomes into “X, the trained stops flying and the trainer is working; when the trainer's icon tums into", the trainee is flying and the trainer is in leisure. {3) Usage method The training switch can be freely switchable between Left trim and Right trim. The default setting is Right trim.
deletion DOVE-10 Welcomes to use the DOVE-10 transmitter 3.18 Timer There are two timers which can be set as stopwatch and countdown, respectively. Each timer can be operated by switch or by shootout. Setting method: Press ENT to enter Main Menu, and then press get access to Function Menu. Then push select” Timer® and press ENT to enter Timer interface. The timing range of stopwatch is from 0 to 59:59 (59 minutes 59 seconds). The default setting is stopwatch.
deletion Welcome to use the DEC-10 transmitter DOVE-10 le All the functional settings, which are relative to the operation system of DOVE-10 Itself, are fully Integrated In System Menu. They Include Languages, Display, Buzzer, vibrator, Stick Made, Stick Direction, Stick calibration, and About. Below is the boot screen of helicopter: Elevator trim Throttles trim Transmission power display | I Fl sty oun EWE Model name wan Tpeeei—pel Coruscation spay —— Er Prep dey 1.
devolution DOVE-10 Welcome to use the DOVE-10 transmitter 1.3 Buzzer waning Crossing ENT to enter the main menu and pressing move the navigational mark io select system menu then using ENT to enter System menu. Pressing select Buzzer and pressing ENT to enter the buzzer interface ble i mane (1) Status:There are On and off two status on the Buzzer : interface. Pressing move the navigational mark to the status option. Pressing change the ON or OFF status.
deletion Welcomes to use the DOVE-10 transmitter DOVE-10 ohm Select the stick mode according to the throttle mode showing on the screen. Devi-10 offers 4 stick modes, please refer to “8.0 Switches exchange between left-hand and right-hand throttles. Press EXT to exit after finished. 1.6 Stick Direction Press ENT to get Main Menu, press select {immunizes . System Menu, and then press ENT to the System Menu, press select Stick Direction, and press ENT 5 to get stick direction setting interface.
Welcome to use the DOVE-10 transmitter deletion DOVE-10 2.0 Model Menu Model Menu manages all the mode! data saved in DOVE-10. It includes Model Select, Model Name, Mode! Copy, Model Transmit, Mode! Receive, Model Reset, Type Select, Trim System, Stick Position Switch, Device Select, Device Output, Wing Type, Power Amplifier, Fixed ID and Sensor setting. 2.1 Mode! Select Press ENT to get Man Menu and press make Model Menu Is selected.
declension DOVE-10 2.4 Node! wireless copy Welcome to use the DOVE-10 transmitter The model data between two DOVE-10 equipment can be tirelessly copied via Mode! Transmit and Mode! Receive in Model Menu. (1) Model transmission Press ENT to enter "Main Menu" and press select "Model Menu”. Press ENT to get "Model Menu™ and press select "Mode! transmission”, continue to press ENT to enter "Model Transmit" setting Interface.
deletion Welcome to use the DOVE-10 transmitter DOVE-10 2.5 Model reset All the model data can be restored to factory settings via Model Reset. Press the ENT to get Man Menu and press Eli HIE a] i select Modal Menu. Press ENT to get Mods! Menu and ee : press select Model Rena, pass ENT to get iG Mads! reset setting interface, Simon It is possible to store up to 30 models data in the model Loe Tans list of DOVE-10 equipment. There are two methods aia reset the model data: batch reset and single reset.
detention DOVE-10 Press select the trim which will set, press R to Welcome to use the DOVE-10 transmitter increase the trim value and press L fo reduce. For elevator, aileron, and rudder, there are two moral options: Normal and Limited, press R or L you can change the setup. “Normal” means the trim Is always working although the corresponding stick stays anywhere.
It's possible to set up all functional switches and adjust levers according to your needs or habits. The Function Includes: event ion DOVE-10 Welcome to use the DOVE-10 transmitter 2.9 Device select This setting can help you configure various functional switches, or adjust levers. It includes Flight Mode switch, Flight Mode trim, Throttle hold Switch and Flap Switch select, Flap Trim select. Press ENT to enter Main Menu, press move navigation mark to select Mods! menu.
