deletion DOVE-10 Welcomes to uss the DOVE-10 transmitter Normal Mode Press UPEND to choose “Normal Mode®project set, press R/L can increase or decrease the value individually. if the GYRO have "NOR mode and the value Is lower than 50%.t Is “NOR’mode. the lower of the value Is the bigger of the GYRO sensitivity becomes. The factory default value is 50%. “Stunt hold" settings refer to “Normal Mode”. After finishing the passphrases EXT to exit. 3.
deletion DOVE-10 Welcomes to use the DOVE-10 transmitter (1) Flight Mode. In the “Tail Curve” interface, press UPEND to make the navigation mark choose “Flight Mode™ set Toggle the flight mode switch and shown the current flight mode. In the set of flight mode can set point “output "items. {2) pitch Press UPEND to make the navigation mark choose “pitch” set,press R/L to choose the two options Normal and Original Select the desired item.
Welcome to use the DOVE-10 transmitter 3.11 Swash Mix This function, which can be executed through devolution DOVE-10 flight mods, Is used for amending the variation caused by swash plate movement, when the aileron or elevator Is working. Press the “ENT” to enter Main Menu and then press choose the navigation mark of enter Function Menu. The interface will show the Swash Mix Setting after press the “ENT . The “Swash Mix" item is only effected after choose the two or more servos in “2.11 Swash Type”.
deletion DOVE-10 Welcome to use the DOVE-10 transmitter (1) Flight mode. Press enter the Flight Mode at the interface of Pitch Curve,and then move the switch of fight mode, the state of fight mode will be shown. The Pitch Curve can be set at the current state. There are “Normal Mode", "Stunt 17, "Stunt 2" and “throttle hold” 4 flight modes. The “Normal Mode" Is made as an example for Your reference.
detention Welcome to use the DOVE-10 transmitter DOVE-10 Throttle curve Pitch curve 100% 100% 5 75%) 75%. 2%¥, Throttle curve 100%! 100% 75%: 25%) % on Cliche curve 100% 12° 5% Is Authorization landing BU] 23%, 4 ”% 3.13 Program Mix There are 8 series of program mix, mix channels and values are adjustable. Setting Method: Press ENT enter to main menu. Press UP or DN, FUNCTION is fishing, press ENT to enter function menu, then press UP or DN select "PRGMX".
Welcomes to use the DOVE-10 transmitter {1.1) Master channel setting Press move the navigational mark to select Master option and press ENT to Master interface. Pressing select the desired channel and press ENT to make a Press EXT to be back to Program Mix 1 interface. (2) Slave channel setting Press move the navigational mark to select Slave option and press ENT to Slave interface. Pressing select the desired channel and press ENT to make a Press EXT to be back to Program Mix Interface. Son {1.
detention DOVE-10 Welcome to use the DOVE-10 transmitter (4) Switch Selection Press choose the navigation mark of Switch setting item and press ENT to enter the select interface of Switch. It is chosen if the Switch item is marked with “Y ".
deletion Welcomes to use the DOVE-10 transmitter DOVE-10 (2.4) Point Setting Press enter the setting interface of Pol 1%, "paint -2, "point -M", "point -3", "point 4", (2.5) State Setting {There Is no Status options when the plot Is Point-L or Point-H) After selecting the point that you want to set,press move the navigational mark to Status Item. Press R or L there are two options of Inhibit and Active. Select Inhibit for unchanging the current amount (the default setting is Inhibit).
detention DOVE-10 Welcome to use the DOVE-10 transmitter 3.15 Fall safe There are two possibilities for use if the transmission signal is under abnormal condition. The first one is to lock the last action data received; the second one is to execute the per-set data which is per-set. The default setting is Servo Hold. Setting method: Press ENT to enter the Main Menu, and then press move the navigational mark to select Function Menu.
deletion Welcome to use the DEC-10 transmitter DOVE-10 (3) Rate Sensor-Show 2 different measured RPM value; | {4) GPS Sensor:Press tum to GPS functionalist located date time, longitude, latitude, altitude and speed; 3.17 Trainer Two DOVE-10 transmitters working together can execute the training function to meet the requirements for the beginner.
