IX-ENG-482/TD7-V1 / 202112 VIDEO INTERCOM SYSTEM IX482 7’’ IPS FULL VIEW ANGLE TFT MONITOR • Please read this manual carefully before using the product you purchase,and keep it well for future use. • Please note that images and sketch maps in this manual may be different from the actual product.
1. Parts and Functions LCD Screen Microphone Power/No Disturb Indicator Talk/Mon Button Unlock Button Terminal connector SW+ SW- +12V PP+ Z1 Z2 Z3 Z4 GD A1 Alarm zone 12V A0 Lan connector Key functions Power/No Disturb indicator Talk/Mon button Show the power status of the system. Show the no disturb status. Press to communicate hands free with visitor; Press to view the outdoor condition in standby mode. LCD screen Display the visitors' image.
2. Mounting Mounting box 145~160 cm The unit Mounting screw x 2(included) Cat-5e/Cat-6 cable Mounting bracket The installation height is suggested to 145~160cm. 1. Use screws to fasten the mounting bracket to the wall with mounting box. 2. Connect the cat-5e or cat-6 cables to the unit. 3. Mount the unit to the mounting bracket, make sure the unit is absolutely attached to the mounting bracket. 3. Main Menu The Main menu is your starting point for using all the applications on your monitor.
1 2 3 10 4 5 9 8 7 6 1 Intercom icon 6 Close icon 2 Call Record icon 7 About icon 3 Monitor icon 8 Status bar 4 Setting icon 9 Logo Allows you to call other indoor station. Allows you to view the call record. Allows you to monitor the door stations, cameras. Use to change the indoor station's settings. 5 Call Scene icon Allows you to activate the functions of No disturb, Divert. Touch to turn off the screen. Allows you to view the information about device.
4. Status Bar Icons Icon Description Missed call Display when there is missed call unread. Touch to review the missed call in shortcut. No disturb Indicates the device is in “No disturb” mode. Divert call Indicates the device is in “Divert call” mode. Device online Indicates device online, but not connect to internet. Cloud server worked Indicates the device is connceted to the cloud server. No cloud server Indicates the device is not connceted to the cloud server.
5. Answering a Call When you receive a call, the indoor station rings. Image will be displayed on the screen. 1. Touch icon or press TALK/MON button. Speak within about 50 cm of the microphone. Begin communicating hands free with the visitor for 90 seconds. 2. When finished, Touch icon or press TALK/MON button again. Available functions while talking on a call • Door release • Manual recording Notes: 1.
6. Monitoring This section can be used to monitor your home by enabling one of the cameras inside the apartment, the common areas (e.g. garages, garden), and at the entrance. 1. From the main menu, tap "Monitor" icon. 2. Select the desired tap. - Allows you to select door station camera or IP camera( if the system installs multi door station or IP camera) . 3. Select the desired camera. 4. When finished, tap button on panel. * During monitoring, images can be viewed, but audio cannot be heard.
Monitor Monitor Favorite Quad DS1 DS2 DS3 DS4 DS2 DS3 DS4 Monitor Monitor Favorite Quad DS1 8. PIP View Precondition: this function requires the system to access the cameras or set the camera proxy settings. The picture-in-picture display allows the user to see two images from different sources at the same time during the call, which is convenient for the user to see the visitor intuitively and concretely.
. Quad View Precondition: this function requires the system to access the cameras or set the camera proxy settings. The Quad display allows the user to quickly and simultaneously view four images from different video resource, and to quickly switch & zoom in on a screen by one click.
. Making Calls You can call other residences, common area phones or facility staff office, and even other rooms in your own residence. whichever monitor answers the call, you can use many of the features described in feature available while talking on a call. Namelist call by using the namelist 1. From the main menu, tap "Intercom" icon. - A list of available items is displayed. 2. Select "Namelist". - A list of name is displayed if the system allows. 3. Select the desired name.
. View Call Record The monitor records information about calls you have answered, missed, and made, and saves it in the call record. See the following steps to view the call record. 1. From the main menu, tap "Call record" icon. 2. Select the desired tap. - Missed: Displays calls you received but did not answer. - Incoming: Displays calls you answered. - Outgoing: Displays calls you made. - Playback: Displays pictures/videos you received / made. 3. Browse the call record as needed. 4.
Plays the next video. Plays the previous video. Delete video. ? Delete confirm. Note： 1. If without SD card, video recording time is 3 seconds. Up to 10 videos can be saved, Subsequent records will overwrite the oldest items. If with SD card, video recording time is 10 seconds by default (Max 600 seconds could be set or customized). 2. Support 512G SD card. 12. No Disturb Mode During a certain period, if you don't want to be disturbed, you can go to set DND mode. 1.
. Divert Calls The calling from door station can be diverted to your smart phone. please note that this function should be supported by SIP network. 1. From the main menu, tap "Call scene" icon. 2. Select the desired tap. - Divert call if no answer: If nobody answers the call in 30s when receives call from door station, diverts the call to the smart phone.
List of settings Call Tune Ring volume - Ring timing - DS ring - CDS ring - OS ring - Message ring - Doorbell ring Intercom ring - Innercall ring - Alarm ring General Date and time - Language - Monitor timing - Shortcut setting - SD card - Auto close after unlock - Auto unclock - Name Installer IP address - Call_Nbr - Parameter - Upgrade - Onsite tools Manager Sip config - Private unlock code - Common unlock code - Card manager - Back and restore Ext.
Example: "Date and time"setting 1. From the main menu, tap "Setting" icon. - A list of available setting categories is displayed. 2. Select "General", and then tap "Date and time" item. - Date and time seting interface is displayed. 3. Select and change the settings as desired. 4. Tap / to save the new setting. Date mode: 2 display mode: month/date/year and date/month/year Time mode: 2 display mode: HOUR_12 and HOUR_24. Date: touch it to set the date . Time: touch it to set the time.
15. Address Setup 1. From the main menu, tap "Setting" icon. - A list of available setting categories is displayed. 2. Select "Installer", and then tap "Call_Nbr" item. 3. Input password if required (66666666 by default). Input installer PWD Installer Call Tune General Installer Manager Ext.Unit 123 - IP address 192.168.251.
MS_NBR: Master and slave number, 01 is master monitor, 02~32 is slave monitor. Name: The “Name” input here will sync to door station’s calling list automatically. Global_Nbr: Extra call number for common door station calling to this monitor. Local_Nbr: Extra call number for door station in same building calling to this monitor 16. Upgrade 1. From the main menu, tap "Setting" icon. - A list of available setting categories is displayed. 2. Select "Installer", and then tap "Upgrade" item. 3.
Tap “Server” to select firmware source, update firmware could come from as below, tap on the source: 1. Cloud Server Cloud server reqiures internet. Server1[47.91.88.33] Server2[47.106.104.38] 2. Local LAN server (IX -Builder) Use IX-Builder PC software to creat a tempory local server for update. Server3[192.168.2.60] #IX-Builder default IP [Input IP address] 3. SD card Copy upgrade firmware befor upgrade.
17. How to add IP camera to IP monitor Preparation Select the appropriate IP camera to access the system on demand. And set parameters for the IP camera. Video Codec An Onvif IP camera could be added to IP monitor IX471S, as long as this IPC could support following video codec: H264B/H264/H264H/H265/H265+ * 1. MJEPG decoding is not supported. 2. Some IPC can support both audio and video streams, please select video stream.
Add IP Camera to IX471S on site 1. Select the correct menu according to the actual situation Ext.Unit Call Tune Auto setup wizard General IM extensions Installer Outdoor stations 0 IPC camera 0 Manager Ext.Unit 4 Enter OS binding WLAN IPC camera 0 It depends on how the monitor is connected to the router where the IPC is located. If it is wireless connected to PoE or Router which IPC attached , select WLAN IPC camera to add.
18. Download Setup VDP Connect APP 1. Scan and download VDP Connect APP, or search “VDP Connect” on APP store. IOS Android 2. Permit “VDP Connect” with permissons, tap screen of IP monitor → Settings → Manager → SIP config → .
3. After login SIP account on VDP Connect APP, check on status bar, or tap on the “Connected” area to manually register, until VDP Connect display: 19. Surveillance door station via VDP Connect APP On VDP CONNECT APP, press on the icon and wait for a few second. If the system have multiple door stations,you can switch to view the door station you want. And push PTT icon to talk, or push unlock icon to open the door.
20. Specification ● Power Source: Power-over-Ethernet (IEEE 802.3af Class 0) ● LAN Interface: 10 BASE-T / 100 BASE-TX Ethernet (RJ-45) ● Monitor screen: 7’’ IPS full view angle TFT ● Display Resolutions: 1024*600 resolution ● Wire Type: Cat-5e or Cat-6 ● Wiring Distance: 100m (Approx. 330') ● Operating temperature: -10 to +50 (oC) ● Dimension: 159(H)×185(W)×18.5(D)mm 21. Precautions 1) All components should be protected from violence vibration.
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
