GE+3FE+WIFI EPON ONU Quick Installation Guide V2.0 Aug. 13, 2019 P01.
1GE+3FE+WIFI EPON ONU Quick Installation Guide_V2.0 1. Indicator and Interface Description 1.1 Product Picture Figure 1 1GE+3FE+WIFI EPON ONU 1.2 Application Chart Figure 2 Application Chart 1.
1GE+3FE+WIFI EPON ONU Quick Installation Guide_V2.0 LED Mark Power POWER Registration Optical signal WiFi PON Status Description On The device is powered up. Off The device is powered down. On The device is registered to the PON system. Off Device is not registered to the PON system. Blink Device registration is incorrect. Blink Device does not receive optical signals. LOS Off Device has received optical signal.
1GE+3FE+WIFI EPON ONU Quick Installation Guide_V2.0 2. Packing List Contents Quantity Contents Quantity EPON ONU 1 pcs Power adapter 1 pcs Installation Guide 1 pcs 3. Certification 4. Hardware Installation Installation Environment Requirements ONU equipment must be installed in the interior, and to ensure the following conditions: Confirmation at the ONU installation at sufficient space to facilitate cooling machine. ONU suitable operating temperature of -5 ℃ ~ 55 ℃, humidity 10% to 90%.
1GE+3FE+WIFI EPON ONU Quick Installation Guide_V2.0 FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.