Wireless follow focus controller USER MANUAL Model:CG-FC821,CG-FC831 Brand:CINEGEARS Manufacture:GuangZhou SunFieldAimo Electronic Technology Co.
Contents Introduction 2 Rattlesnake Follow Focus User Manual 3 Setting Up the Controller 3 Using the Controller 4 Setting Controller Modes 5 • Controller • Syncronization • Automatic Calibration • Manual Calibration • LED Marker Light • Screen Brightness • Remote Record Trigger • Setting Up Vibration and Lock Points • Setting Presets • Changing Motor Speed • Changing Damping Setting • M-Normal Mode • M-Lock Mode • M-Zoom Mode • Manual Mode Disclaimers 6 About Cinegears 7 1
Introduction The Wireless follow focus controller is a wireless lens control kit for driving your lens rings (focus, iris, and zoom.) The W ireless follow controller has been redesigned to be more ergonomic than ever before. With up to 20 hours of continuous shooting per battery charge, control your lens focus, iris, or zoom with precision from up to 200 meters away with our Wireless follow focus controller.
Setting Up the Controller Controller The controls have been designed for ease of use: They allow for preset memory points, where you can save up to four, as well as two lock points that will cause the controller to vibrate as you approach them. Choose from 16 different speed levels to control the transition speed of the presets, and 4 different damping levels from ultraresponsive to ultra smooth.
Using the Controller Remote Record Trigger Press (REC) on your controller to toggle Recording mode ON or OFF. Setting Up Vibration and Lock Points Press and hold (REC) to toggle turn on/off the vibration setting. Press and hold (REC) + (A) to set controller to “M-Normal.” Turn controller to desired start point and press and hold (SET) + (C) to set lock point 1. Turn controller to desired end point and press and hold (SET) + (D) to set lock point 2. To clear all lock points, press and hold (REC) + (D).
Setting Controller Modes M-Normal Mode Press and hold (REC) + (A) to switch to M-Normal mode. In M-Normal mode, user can set vibration points, and move controller beyond set lock points. M-Lock Mode Press and hold (REC) + (B) to switch to M-Lock mode. In M-Lock mode, user cannot move past set lock points. M-Zoom Mode Press and hold (REC) + (C) to switch to M-Zoom mode. In M-Zoom mode, user cannot move past set lock points. In M-Zoom, controller moves more slowly between lock points for finer control.
Disclaimers Terms and Conditions Congratulations on purchasing your new CINEGEARS product. Please read this manual carefully before using the product. By using this product, you hereby agree to this disclaimer and signify that you have read it in full. You agree that you are responsible for your own conduct and any content created while using CINEGEARS products, and for any consequence thereof.
About Cine Gears Inc. Cine Gears Inc. is an industry leading company that designs and manufactures digital wireless follow focus systems, lens control systems, camera motion control systems and accessories for film and broadcast industry. As a big believer in the power of creativity and ideas, we designed the Pegasus cablecam, the wireless motor drive that integrated a built in wireless transmitter, and the wireless finger wheel controller. The Cine Gears Inc.
FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
