Cinegears Wireless Trigger Transmitter User Manual Product Name: Cinegears Wireless Trigger Transmitter Brand: CINEGEARS Model:CG-1430 MANUAL BOOK Manufacture: GuangZhou SunFieldAimo Electronic Technology Co., Ltd © 2017 Cine Gears INC. All Rights Reserved.
Contents Introduction 2 User Manual 3 Disclaimers 5 Customer Support 6 © 2017 Cine Gears INC. All Rights Reserved.
Introduction The Cinegears Wireless Trigger Kit is a completely customizable, zero-latency solution for start/stop triggering. The Wireless Trigger Kit not only triggers cameras, but can be used to set off stage lighting, fireworks, and even explosive devices for mining. The kit operates up to 300m away (line of sight), or connect another transmitter on a separate channel to the receiver via LANC cable for triggering from afar.
User Manual Turning the Unit On/Off Press REC 3 times in quick succession on the transmitter or receiver to turn the unit on or off. Transmitter LED Light On the transmitter, press REC twice in quick succession to turn the LED light on or off. Synchronization To sync the transmitter and receiver, press REC on the receiver 5 times in quick succession until the CHG light turns on. Press ON+OFF on the transmitter and enter desired settings, and press REC to confirm options.
User Manual Using the Receiver Independently The receiver can be used as a separate unit. When COM light is on, the receiver is controlled by the transmitter. To use the receiver as an independent trigger, press ON+OFF+REC, the COM light will turn off and CHG will flash. LANC When using LANC, you can use the trigger system to turn the camera on or off. Press ON+REC to turn on the camera. Press OFF+REC to turn off the camera. © 2017 Cine Gears INC. All Rights Reserved.
Disclaimers Terms and Conditions Congratulations on purchasing your new CINEGEARS product. Please read this manual carefully before using the product. By using this product, you hereby agree to this disclaimer and signify that you have read it in full. You agree that you are responsible for your own conduct and any content created while using CINEGEARS products, and for any consequence thereof.
About Cine Gears Inc. Cine Gears Inc. is an industry leading company that designs and manufactures digital wireless follow focus systems, lens control systems, camera motion control systems and accessories for film and broadcast industry. As a big believer in the power of creativity and ideas, we designed the Pegasus cablecam, the wireless motor drive that integrated a built in wireless transmitter, and the wireless finger wheel controller. The Cine Gears Inc.
FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.