MANUAL BOOK
Contents Controllers 3 Multi Axis Motors and Gears 4 Accessories Multi Axis Accessories Remote Recording Triggers Specifications CINEGEARS MULTI AXIS FOLLOW FOCUS KIT – User Manual Instructions 5 8 9 10 11 Disclaimers 16 Customer Support 17
Introduction The Cinegears Multi Axis Digital Focus Kit is a wireless lens control kit for driving your lens rings (focus,iris and zoom.) This system includes the Cinegears Wireless Hand Controller, The Cinegears Wireless Receiver, and the Wireless Lens Motors. The Lens Motors can fit both 19mm and 15mm rail systems. There is also the option to tether the receiver to the controller with a 4-pin Lemo cable.
Controllers and Receivers Multi Axis Controller With the Wireless Hand Controller, you can deliver a reliable signal from up to 100 meters wirelessly. For jib, Steadicam, or helicopter shots, the Wireless Hand Controller allows focus pullers to stand farther away from camera without compromising precision. Set up to four Focus, Iris, and Zoom presets with a single press of a button, same as the integrated record button.
Multi Axis Motors and Gears Standard Multi Axis Wireless Motor (1-216) A focus kit is only as good as its motors, which is why the Cinegears multi axis lens motors are held to strict performance benchmarks for noise, torque, and design. With a hidden antenna and reduced size overall, compared to our single axis motors, the Cinegears multi axis lens motor does not compromise performance; motor power and transmission distances are the same.
Multi Axis Accessories Standard Mounting Brackets (1-125) The perfect companion to the CINEGEARS follow focus system, this durable bracket makes your installs easier. It has a conveniently placed steel slide which makes attaching it to the motor simple. This dependable bracket creates a fast and easy installation for you. The bracket has to be tough – that's why we made this one from ultra-durable material.
Multi Axis Accessories Cinegears 4-Port D-Tap Female Cable Splitter with Advanced Surge Protection (1-189) This Cinegears power solution cable splits 1 D-Tap Input into 4 Outputs at a 10 Amp Maximum Load with Unregulated Voltage and advanced surge protection will keep your electrical products running safely. Multi Power Data Cable A 7-Pin Lemo Motor Cable for the Multi Axis Receiver.
Multi Axis Accessories Adjustable Rubber Focus Ring (1-401) High Quality Professional Solid Rubber Lens Focus Ring:--Strong and durable design, flexible and customizable, perfectly fit for most lens size with its standard 0.8 Cinegears pitch. Detachable Antenna for the Multi Axis Receiver (1-211) The CINEGEARS Multi-Axis receiver antenna is detachable for boosted signal and easier storage. This durable and compact design will ensure that you can always communicate with the receiver.
Remote Recording Triggers Multi Axis Remote Record Trigger: Sony/Canon (1-219) The versatile Cinegears Multi Axis Receiver Remote REC trigger cable (LANC) is compatible with Sony FS7/FS700, Black Magic Production Camera/4K Camera, Black Magic URSA, and Canon C100-C300. A built in LED light indicates recording status, and the black anodized aluminum casing ensures durability.
Specifications
Cinegears Multi Axis Follow Focus Kit - User Manual
Instructions Materials The Follow Focus system is made from an aluminum alloy using the precision of CNC machining. The design also allows the drive gear to be installed on both sides of the lens, which makes it easier to have multiple drives.
Instructions Gears and Rods The motor comes with a standard gear (teeth mold of 0.8, length of 314mm, width of 10mm or 13mm). It can be applied to various types of lenses. We also offer other standard diameters, from 39 to 45mm, modulus of 0.5, 0.6, 0.8 and 1.0 of the drive gear to fit all lenses. Size Motor Dimensions: 133 mm (height) x 72 mm (width) x 28 mm (depth) and weighs ~ 380 grams. Remote Control Dimensions: 115 mm (length) x 68 mm (width) x 32 mm (depth) and weighs ~ 400 grams.
Instructions Automatic Focus/Zoom/Iris Calibration SET + B (Hold for 3 Seconds) automatic initialization of Focus only SET + C (Hold for 3 Seconds) automatic initialization of Zoom only SET + D (Hold for 3 Seconds) automatic initialization of Aperture only Set Up Presets Go to the focus point of your choosing, press and hold (A) button until it flashes, your point is now set. Repeat with (B) (C) and (D) for multiple points. Press the same preset button to exit the preset mode.
Instructions Manual Lens Remapping REC + B (Hold for 3 Seconds) automatic initialization of Focus only REC + C (Hold for 3 Seconds) automatic initialization of Zoom only REC + D (Hold for 3 Seconds) automatic initialization of Aperture only Press and hold (C) to rotate the lens clockwise, then press (A) to choose the start point. Press and hold (D) to rotate counter clockwise, then press (B) to choose the end point you want.
Instructions Buttons and Lights SET CODE (hold for 3 sec) parameters SET A (hold for 3 sec) ALL (focus, zoom and aperture) automatic initialization SET B (hold for 3 sec) automatic initialization of focus SET C (hold for 3 sec) automatic initialization of zoom SET D (hold for 3 sec) automatic initialization of aperture REC B (hold for 3 sec) manual initialization of focus REC C (hold for 3 sec) manual initialization of zoom REC D (hold for 3 sec) manual initialization of aperture During the ma
Disclaimers Terms and Conditions Congratulations on purchasing your new CINEGEARS product. Please read this manual carefully before using the product. By using this product, you hereby agree to this disclaimer and signify that you have read it in full. You agree that you are responsible for your own conduct and any content created while using CINEGEARS products, and for any consequence thereof.
FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.