User's Manual

2. Operation Frequency : 2432MHz&,5180 MHz
Safety Warnings and Precautions
Before using and operating this device, please read thoroughly
and comply with the following precautions in order to prevent
accidents or mal-operations.
Operating Environment
Do not charge or use the device in dusty or wet conditions, to
prevent internal circuit failure.
Keep the device away from heat sources such as an electric heater.
Safety Precaution for Children
This device and its parts may contain some small components,
so keep the product out of reach of children to prevent accidents.
Water Precaution
This device is not water-resistant. Keep it dry.
Maintenance
Please contact professional service personnel for maintenance
services.
Do not insert any sharp or pointed object into the device.
Prevent the device from falls and collisions with other objects,
which may cause damages.
1. Intellectual property right statement: The hardware design
and software of this product are covered by the patents.
Anyone who reproduces this product or the content of the
instruction without the authorization of the Company shall
assume legal liabilities.
2. This instruction is provided for reference onl y , and the functions
shown in the manual may di f fer from the actual functions of the
product the customers actually purchase and receive.
3. The picture is for reference only. Please subject to the actual
product. The Company reserves the rights to improve and
change the appearance and design of the product without
notice.
Wireless Transmitter
Operating Instruction
Connection
Wireless transmitter USB receiver(optional)
Step 1:
First time use: Connect the transmitter and receiver to the USB
ports on your interactive intelligent panel display for pairing (after
then, there is no need to pair again).
Step 2:
After pairing, connect the transmitter to a USB port on your PC;
click to run the Screen Mirroring Software (this is required for the
first time use; after then there is no need to operate again).
Step 3:
Press the button on the transmitter by following the prompts
displayed on your PC to implement screen mirroring.
Basic Troubleshooting
When the systems cannot get connected, please troubleshoot as
follows:
1. Check that the Screen Mirroring Software runs properly on your
PC.
2. Check that the receiver is correctly connected to the interactive
intelligent panel display.
3. Pair the screen mirroring devices again and restart the interactive
intelligent panel display.
Features
1. Mirror your PC's desktop to your interactive intelligent panel
display by connecting the transmitter to your PC and running the
Screen Mirroring Software.
2. Support synchronization of audio and video.
3. Multiple transmitters are in a ready state (support a maximum of
8 transmitters); quickly switch by pressing the button on the
transmitter.
4. Extended screen: The interactive intelligent panel display will be
a extended screen of your PC for contents presentation.
5. Enable touch screen: The Enable Touch Screen allows you to
control your PC by touching the screen, to implement
bidirectional interactions.
Indicators Status Descriptions
1. Blinking: The transmitter is connecting to the interactive intelligent
2. Steady on: The transmitter is connected to the interactive
intelligent panel display and the screening mirroring is set up.
3. Low brightness: Mirroring
Key Specifications
1. Operating systems supported: Win7/Win8/Win8.1/MacOS
3. T ransmission delay: < 120 ms
4. Input power: 5 V -DC
5. Overall power consumption: 2.5 W
6. Overall dimensions ( L x W x D): 77 mm x 178.7 mm x 21.3 mm
Packing List
Wireless transmitter —— 1 pc
USB receiver —— 1 pc (optional)
Operating instruction —— 1 pc
panel display.