User's Manual

WiFi Module User Manual
Note：All the pictures in this manual are for reference only, subject to our available products.
◆ Safety Warning
Before using and operating this device, please read thoroughly and comply with the following
precautions in order to prevent accidents or inaccurate operations.
★ Placement
DO NOT charge or use the device in dusty or wet conditions, to prevent internal circuit failure.
Keep the device away from heat sources such as an electric heater.
Normal operating temperature is 0-40℃, normal operating humidity is 10%-90%RH.
★ Children Safety
The product and accessories may contain some small-part. Please place them beyond the
reach of children in avoidance of swallowing danger.
★ Water Precaution
The product is not waterproof, please keep it dry.
★ Maintenance
When the equipment is damaged, please do not disassemble it for repair without permission,
please call customer service to report for repair.
Please contact professional service personnel for maintenance services.
DO NOT insert any sharp or pointed object into the device.
Prevent the device from falls and collisions with other objects, which may cause damages.
◆ Statement
Intellectual property right statement: The hardware design and software of
this product are covered by the patents.Anyone who reproduces this product or the content of
the instruction without the authorization of the Company shall assume legal liabilities.
This manual is for reference only, and the actual function of the final product is
subject to the actual function of the product received by the customer.
The picture is for reference only, please refer to the actual product. The company
reserves the right to improve and change the appearance and design of the product without
notice.
1.Installation Procedure
Warning: Please make sure the power cord of the Interactive Flat Panel (IFP) is
disconnected before installation.
1) Take off the Cover.
2) Insert the WiFi module fully into the IFP along the direction of the arrow.
3) Complete assembly.
Note: This WiFi module only works for the IFP by plugging it into the above slot.
2.Function
After completing the installation, turn on the IFP, and the WIFI module will run automatically.
1)Click "Settings" on the screen.
2)Click “Wireless network”, you can turn on/off the Wi-Fi.
3)Click the icon “ ”, enter the following the Wireless hostpot setting interface.