广 州 视 琨 电 子 科 技 有 限 公 司 Guangzhou Shikun Electronic Technology Company Limited 保密等级:机密 SPECIFICATION 产品规格书 SKI.W7603.1 IEEE 802.11b/g/n 2T2R USB Wi-Fi Module Approved by Shikun Checked by 审核 Rechecked by 复审 Approved by 批准 Please send the original back to us after you have approved and signed.
REVISION HISTORY VERSION DATE V0 2018.12.15 V1 2019.02.14 BOARD ID SKI.W7603.1 A18432 SKI.W7603.1 A18432 PAGE DESCRIPTION AUTHOR All First Issued. Candy 1 Modified the features.
Content 1. Introduction(简介) ...................................................... 1 2. FEATURES(特性) ....................................................... 1 3. Block Diagram(结构框图) ............................................... 1 4. Package Outline and Mounting(外形及安装尺寸) ......................... 2 5. Pin Definition(引脚定义) ................................................. 2 6. Product Pictures(实物图片) .............................................. 3 7. Key Materials(关键物料)......................................
SKI.W7603.1 1. Introduction(简介) SKI.W7603.1 module is based on MEDIATEK MT7603U solution. The MT7603U is a highly integrated Wi-Fi single chip which supports 300 Mbps PHY rate. It fully complies with IEEE 802.11n and IEEE 802.11 b/g standards, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective throughput from an extended distance. This documentation describes the engineering requirements specification. 2. FEATURES(特性) Reserving System 接收制式 IEEE Std.
SKI.W7603.1 4. Package Outline and Mounting(外形及安装尺寸) 5. Pin Definition(引脚定义) 正视图 PIN SYMBOL DESCRIPTION 1 GND Connected to Ground 2 ANT0 Antenna 0 3 GND Connected to Ground 4 GND Connected to Ground 5 ANT1 Antenna 1 6 GND Connected to Ground 7 GND Connected to Ground 8 USB_DP USB2.0 DP Signal 9 USB_DM USB2.0 DM Signal 10 VCC +3.
SKI.W7603.1 6. Product Pictures(实物图片) 正视图(top view) 背视图(bottom view) 7. Key Materials(关键物料) Número 1 2 3 Componentes clave Model specificacio nes Circuito integrado MT7603U 48-QFN MEDIATEK PCB SKI.W7603.1 FR-4,4LAY -- 2.3.3.400001208 40MHz Oscilador de cristal Observación Remark 8. General Requirements(一般要求) No. Feature Description 7-1 Operation Voltage 3.3V±0.
SKI.W7603.1 9. Electrical Characteristics(电气特性) Electrical characteristics are based on test results of prototype conduction.Under the following extreme test conditions, the electrical characteristics can be met: temperature (0℃,+25℃,+40℃), voltage (3.0V,3.3V,3.6V). 电气特性指标基于样机传导测试结果。如下极端测试条件下,均可满足电气特性指标:温度 (0℃,+25℃,+40℃)、电压(3.0V,3.3V,3.6V)。 9.1 IEEE 802.11b Section Items Contents Specification IEEE802.11b Mode CCK Channel CH1 to CH13 Data rate 1, 2, 5.5, 11Mbps TX Characteristics Min. Typ.
SKI.W7603.1 6 Maximum Input Level (FER ≦8%) -10 - - dBm 9.2 IEEE 802.11g Section Items Contents Specification IEEE802.11g Mode OFDM Channel CH1 to CH13 Data rate 6, 9, 12, 18, 24, 36, 48, 54Mbps TX Characteristics Min. Typ. Max.
SKI.W7603.1 9.3 IEEE 802.11n HT20 Section Items Contents Specification IEEE802.11n HT20 @ 2.4GHz Mode OFDM Channel CH1 to CH13 Data rate (MCS index) TX Characteristics MCS0/1/2/3/4/5/6/7 Min. Typ. Max.
SKI.W7603.1 9.4 IEEE 802.11n HT40 Section Items Contents Specification IEEE802.11n HT40 @ 2.4GHz Mode OFDM Channel CH3 to CH11 Data rate (MCS index) MCS0/1/2/3/4/5/6/7 Min. Typ. Max. Unit Min. Typ. Max.
SKI.W7603.1 10. Mechanical,Environmental and Reliability Tests (机械、环境和可靠性测试) Test Items Test Conditions Qty Criteria Condition The packed samples within 100Kg can be tested Drop height: 10-1 Drop test After drop test, the outer box and inner Face Side: 800/600/450mm 1xBox Edge line: 600/450/350mm box will not been broken by appearance visual inspection. Drop time: 1 each Face and edge. X-Y-Z direction, first Frequency changing from 10Hz to 30Hz to 10Hz,amplitude 0.
SKI.W7603.1 Thermostat cabinet temperature: High 10-6 55±5℃ After test, leave samples in standard temperature Applied voltage: load life test 110% rated voltage Working 60 condition for 1 hour and test, Power, EVM and Frequency error shall be satisfied with the test specification.
SKI.W7603.1 11.
SKI.W7603.1 注:上图 3 个框示处为内盒标签粘贴位置。 注:红色箭头处为外箱标签粘贴位置。 (4) Label/标签样式: 内盒标签示例【具体内容根据系统打印为准】 12. Software Requirements(软件要求) The driver supports the following operating systems: Microsoft Windows XP, Vista and Win7.
SKI.W7603.1 FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
SKI.W7603.1 This radio transmitter 2AR82-SKIW7603101 has been approved by Federal Communications Commission to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. Antenna Frequency (MHz) Antenna Type MAX Antenna Gain (dBi) 1 2412-2462 PIFA antenna 2.62 2 2412-2462 PIFA antenna 2.
SKI.W7603.1 on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 etla conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne surl'exposition et la conformité de rf. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
SKI.W7603.1 Notice to OEM integrator Must use the device only in host devices that meet the FCC/ISED RF exposure category of mobile, which means the device is installed and used at distances of at least 20cm from persons. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The end user manual shall include FCC Part 15/ISED RSS GEN compliance statements related to the transmitter as show in this manual. (FCC/ISED Statement).