INSTRUCTION MANUAL Please read the manual carefully . before operating projector.
Contents Important Safeguards....................................................................... 1 Projector Knowledge........................................................................ 2 Remote Control................................................................................. 4 Projector Installation......................................................................... 5 Standard Setting............................................................................... 5 Installation Method..
Important Safeguards Installation • To get a better watching, please use this projector while drawing the curtain or in a dark room. • Please use the projector carefully, dropping or crashing may damage parts or result in blurred images and abnormal displaying. Power • Be careful while using the power cord, avoid excessive bending; the damage of power cable may cause electric shock and fire. • It is better to unplug the power cord after power off. Cleaning • Unplug the power cable firstly.
Projector Knowledge Projector can input high-definition video signal and composite video signal, and support stereo audio signal input and output. Please refer to the following figure to connect the projector and other audio equipment according to your own needs. 8 9 10 11 1 2 3 4 12 13 5 14 6 7 15 1. Level-Stand Adjustment 8. USB port 2. IR receiver 9. AV port 3. Focus Lens 10. HDMI2 port 4. Power Switch 11. Speaker 5. IR for remote control 12. Cooling window 6. 3.
Projector Knowledge 1 2 3 4 1. Keystrokes（picture 1） 2. Rating label 3. Projector mount holes 4. Level-stand adjustment 1. Power Key 2. Exit 3. OK Key 4. Up Key 1 2 3 4 5 6 7 5. Down Key 6. Left Key (picture 1) 7.
Remote Control 4
Projector Installation Standard Setting Please refer to the following table to adjust your picture size and distance. (from the lens to the screen). Aspect ratio 16:9 Picture size (inch） Projection distance (m） 50 1.70 70 2.38 100 3.30 120 3.97 Please allow ± 3% to the image sizes in the table above. If the distance is less than min data and more than max data, the image could be blurry. Warning: Please check the diagram below for the trapezoid adjustment.
Projector Installation Installation Method Contact a professional installer to mount this projector to a ceiling. Follow the instructions below for the correct projector positions. Projector Screen Projector Front projection ceiling mount Screen Screen Rear projection ceiling mount Projector Projector Front projection table mount Screen Rear projection table mount Warning: 1. The projector may be damaged beyond repair if it is incorrectly mounted on a ceiling or on a surface. 2.
Turn the Projector Operation On/Off When the projector is connected to a power source, the projector enters standby and thecover signal indicator is red. Operation on: Press the power key on the body or the power key on the remote control, the indicator will turn blue and enter the working state. Operation off: In the working state, press the power key of the body or the power key on the remote control, the indicator changes from blue to red, and the projector is turned on.
Interface Operation Instructions How to Select the Source Select the source channel you want to enter in the list on the left side of the main interface, such as HDMI 1 / HDMI 2 / AV, then press the “OK” key on the remote control to enter the corresponding source interface.
Interface Operation Instructions WiFi Setting Projection Image Setting Language Setting Setting Update Other Setting About WiFi Setting WIFI ON/OFF GZRIGAL-C TP BMW 9
Interface Operation Instructions How to Use Projection Settings Select the settings icon in the upper right corner of the main interface, and then press the "OK" key on the remote control to enter the settings interface and select "Projection Image Setting". After entering the interface, select the mode you want in the projection settings.
Interface Operation Instructions How to Use iOS Cast In the main interface, select "iOS Cast", press the "OK" key on the remote control to enter the interface, and and then set up in the order in the interface. Note: The projector needs to be connected to the Internet for using the iOS Cast or upgrading the projector for the first time 1. The iOS device and the projector are connected to the same network 2. Open the control center of the iOS device and select Screen mirroring 3.
Interface Operation Instructions How to Use Miracast Select “Miracast” in the main interface and press the “OK” key on the remote control to enter the interface, and then set up in the order in the interface. 1. Turn on the WIFI of the Android device. (It is recommended that the projector is connected to the same router or the WIFI of the Android device is not connected to any router)· 2. Turn on the "Wireless Display" of the Android device. 3. Select the corresponding projector device name.
Interface Operation Instructions How to Play Files in USB Disk Select the required category “movie”, "music", "photo" or "Office Suite" in the main interface, and press the “OK” key on the remote control to enter the corresponding category. Then find the file you want to play in that category, start playing by pressing “OK” key. (You cannot enter the required category without connecting a USB disk.
Troubleshooting Problem 1. The indicator light does not work when the power switch is turned on. Possible Causes ◎ Prower cable is not connected properly . ◎ The power switch is faulty . ◎ The power switch is turnedf.of 2. The projector does ◎ The remote control has no batteries or the batteries are . low not work on when using the remote control. ◎ The remote control is not being aimed at the IR receiver . ◎ The IR receiver is under strong lights. ◎ The input source may not be correct. ◎ No input signal.
Specifications Projection Technology: 5” LCD TFT display Native Resolution: 1920x1080 Image Flip: 360° Projection mode: Front-Desktop / Rear-Desktop / Front-Ceiling / Rear-Ceiling Lens: 5 pieces of glasses lens Aspect Ratio: 16:9 & 4:3 Lamp Type: LED lamp, 50,000 hours life Image Size: 40-150 inch Digital Zoom: 50%-100% Working Voltage: AC100-240V/50-60Hz Projector Size: 260×230×110mm Net Weight: 2.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
C
