Owner's Manual

ManualsBrandsGuangzhou Rantion Technology ManualsElectronicsBluetooth 5.0 Audio Transmitter and Receiver

Moukey MBRT1 Bluetooth 5.0 Audio Transmitter and Receiver

Owner’s Manual

Precautions

Read Carefully Before Proceeding

Please keep this manual in a convenient place for future reference

Power Supply

Please connect the original USB cable to the USB charger, make sure the charger is DC

5V, 1A above current.

Connections

Always turn off the power before connecting or disconnecting. This will help prevent

malfunction and damages.

Environment Considerations

Avoid using the unit in any of the following conditions that could cause malfunction:

●Extremely hot or cold places

●Under direct sunlight

●Magnetic fields

●Near heaters and other heat sources

●Sandy or dusty places

●Places that are extremely humid or exposed to splashing water

●Places with lots of vibrations

Electrical Interference

Devices that are very susceptible to interference or that emits powerful electromagnetic

waves (e.g. radios and TVs) should not be placed near this unit, as interference could

occur. Electromagnetic interference could cause malfunction and could corrupt or destroy

data.

Always operate this unit at a suitable distance from these devices

Handling

Do not apply excessive force to the switches and other controls, exposing the unit to

strong impacts, which could cause it to break.

Do not put foreign objects or liquids into the unit.

Never open the case or attempt to modify the product in any way since this can result in

damage to the unit. Clean only with a soft, dry cloth.

Manufacturer: Guangzhou Rantion Technology Co., Ltd

Summary of content (9 pages)

PAGE 1
Moukey MBRT1 Bluetooth 5.0 Audio Transmitter and Receiver Owner’s Manual Precautions Read Carefully Before Proceeding Please keep this manual in a convenient place for future reference Power Supply Please connect the original USB cable to the USB charger, make sure the charger is DC 5V, 1A above current. Connections Always turn off the power before connecting or disconnecting. This will help prevent malfunction and damages.
PAGE 2
Main Features Moukey MBRT1 Bluetooth 5.0 Audio 2 in 1 Transmitter and Receiver is a wireless long range audio transmitter & receiver incorporating the „aptX‟ and „aptX low-latency‟ technology for CD-like quality sound with virtually no delay. Featuring the Bluetooth 5.0 and support for Qulacomm aptX LL, aptX, AAC decoding, FS decoding and SBC decoding, Moukey MBRT1 will bring you ultimate music listening experience. Moukey MBRT1 can receive a range of the Bluetooth signal up to 30m in doors.
PAGE 3
Button Mode Power Function RCA/ Coaxial / SPDI/F /AUX Switch Power ON/OFF Operation Press once to switch between RCA/ Coaxial / SPDI/F /AUX audio mode. The Led will indicate the input/output status. Press and hold once to switch the power ON/OFF. Press once to switch between transmitting Transmitter Mode mode or receiving mode. The Led will indicate the RX/TX status and show the audio decoding mode.
PAGE 4
normal AptX codec, or the SBC one, those codecs will be used instead. 3. After Bluetooth connected, the LED will indicate the decoding mode automatically. If your headphones or speakers do not support aptX LL, the LL LED will not light. 4. Moukey MBRT1 does not support simultaneous transmit and receive functions. 5. Digital Optical / Coaxial Audio sources for transmitting must be set to PCM or Stereo. Dolby / DTS input is not supported. Setup Instruction Use as a transmitter (TX mode) 1.
PAGE 5
3 2 Press the Power button Select the correct audio input mode (RCA/ Coaxial / SPDI/F /AUX) 4 Press RX/TX switch to the "TX" position Use as a Receiver (RX mode) 1. Connect audio source (Speakers,Amplifier etc.) to MBRT1 audio jacks (RCA/ Coaxial / SPDI/F /AUX) with the audio cables (RCA/ Coaxial / SPDI/F /AUX). 2. Connect MBRT1 to a power source (Highly recommended connecting to power adapter) with a USB-C to USB-A cable.
PAGE 6
3. Press the Power button to turn on MBRT1. 4. Select the correct audio output mode (RCA/ Coaxial / SPDI/F /AUX) by pressing the Mode button (Very Important). 5. Press RX/TX switch to the "RX" position. 6. Pairing - Pair MBRT1 with your Bluetooth-enabled Mobile phone,PC etc. • Active Bluetooth on your phone or another device to find “Moukey MBRT1” to connect. • Wait and connected (For quick pairing, better keep them within 1 meter when pairing).
PAGE 7
MBRT1 will auto-enter pairing mode. Active Bluetooth on your phone or other device & Find "Moukey MBRT1" to connect Note: 1. Highly recommend using power adapter to connect MBRT1, connecting to TV / Computer / DVD may cause ground noise or power shortage. 2. When the device is pairing, it may cause few seconds or minutes. It depends on the Bluetooth protocol of your device and the distance between two devices.
PAGE 8
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 9
Troubleshooting Question Answer Having trouble pairing and connecting to my Bluetooth device 1. Your wireless device supports the wireless profiles listed in the specifications. 2. MBRT1 and your device are next to each other or within 3 feet / 1 meter. 3. Make sure both MBRT1 and the wireless device are in pairing mode. After connecting and pairing with wireless device, cannot hear any music from sound system. 1.