Intelligent All-In-One Machine User’s Manual Applicable for model(s) : TC200/TC200(N)/TC200(L) TC500/TC500(N)/TC500(L) TC800/TC800(N)/TC800(L) TC1200/TC1200(N)/TC1200(L) GUANGZHOU OSTEC ELECTRONIC TECHNOLOGY CO.,LTD. http://www.ostec.com.cn KS090500G4-Ver1.
Content Chapter 1 Notes and Safety Requirements ............................................ - 1 1.1 Cautions and Notes .................................................................... - 1 Chapter 2 Software System Requirements ............................................ - 2 2.1 System Requirements for connection to PC Work Mode ......... - 2 2.2 System Requirements for HDMI Work Mode .......................... - 2 2.3 System Requirements for WiFi Work Mode .............................
Chapter 1 Notes and Safety Requirements 1.1 Cautions and Notes (1) To avoid danger or damage incurred to the lens, do not touch the lens or sensor directly with your fingers. (2) (3) To avoid failure or electric shock hazard and so on, do not disassemble or modify the internal structure of the device. Do not plug in or unplug the USB port or the HDMI port when hands are wet. (4) Do not use alcohol and other organic solvents to clean.
Chapter 2 Software System Requirements 2.1 System Requirements for connection to PC Work Mode ● Windows 7(64 bits) 、Windows 8(64 bits)、Windows8.1(64 bits)、Windows10(64 bits) ● Dual core 3.0 GHz or higher CPU ● 8G RAM or more ● At least 10 GB available hard-disk space ● 1000Mbps/100Mbps compatible with network cable interface 2.2 System Requirements for HDMI Work Mode ●The monitor has an HDMI TYPE A interface. ● The display supports up to 3840x2160 P60 input ● Display HDMI interface support hot plug 2.
Chapter 3 Package List 1.Smart all-in-on displayer camera 4.Mouse 2.12V AC adapter 5.Keyboard 3.Allen key 6.Installation disk KS090500G4-Ver1.
Chapter 4 Introduction to Camera Body 4.1Introduction to camera body ①WiFi antenna: external signal antenna can enhance WiFi signal transmission ②15.6" LCD screen ③Speaker hole: volume channel hole 4 USB3.0 interface:Can connect a mouse, keyboard or USB flash disk, convenient use of ○ embedded APP 5 USB2.
⑮Focusing screw: screw the adjusting screw to adjust the focal length of the microscope. ⑯Master interface: connect with the eyepiece end of the biological microscope. ⑰Public interface: connect with the objective end of the biological microscope. ⑱Tightening screws: tighten screws with allen key to fix the eyepiece of the biological microscope. KS090500G4-Ver1.
Chapter 5 Product Installation 5.1 Install with a binocular microscope 1. Separate the objective end of the microscope from the eyepiece end, as shown in figure 1. 1) loosen the fixing screw of the microscope; 2) take out the eyepiece end of the microscope. 2.
5.2 Uninstallation with a binocular microscope 1. Reverse the installation order KS090500G4-Ver1.
Chapter 6 Instructions for Use 6.1 Software installation 1. Install the KoPa Capture software, put the attached CD into the DVD drive of the computer, click the KoPa Capture Install file, and install the software according to the prompts. Refer to[ User Manual of KoPa Capture ] for the specific installation steps. 2. Install android APP with CD (for android system mobile devices only) 3.
Method 2: Manually connect to mobile devices by entering a password 1) mounting the camera to a microscope: refer to "Chapter 5" 2) power the camera 3) search for the following WiFi signal in the Settings of the mobile device and enter the password WiFi name: WiFiCamera_5G_xxxxxx; Default Password: 12345678 4) Run "KoPa WiFi Lab" APP and click the preview icon of the APP to display image. 5) Please refer to [ User Manual of KoPa WiFi Lab ] for detailed operation. 6.2.2 HDMI connection 1.
Chapter 7 Disclaimer 1. In order to protect the legitimate rights and interests of users, please carefully read the instructions, disclaimers and safety instructions provided with this product before using it. The company reserves the right to update the above documents. Please operate the product according to the instructions and safety instructions. 2.
FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.