USER MANUAL 1 2 3 4 5 6 7 8 9 * 0 # Note: 1. Before using this lock, please pair it to the mobile phone App . 2. This lock is equipped with mechanical keys for manual unlocking. Remove mechanical keys from the package and keep them in a safe place and always have access to them. 3. To power on the lock, four alkaline AA batteries(not included) are required. Non-alkaline and rechargeable batteries ARE NOT RECOMMENDED. 4. This lock is not designed to be exposed to direct sunlight or rain.
Door Preparation 1. Check door thickness and Door Frame. Door frame≧110mm Door thickness: 38-48mm Door drill hole map 2. Check door open direction.
Installation Diagram A B D I K F C H E G A) Outdoor lock body * 1 B) Silicon gasket * 1 C) Mounting plate * 1 D) Indoor lock body * 1 E) Deadbolt * 1 F) Cylindrical sleeve bolt * 1 Installation Diagram Step 1 L J M G) M4 x 25mm cross flat head bolt *1 H) M4 x 30mm cross flat head bolt * 3 I) M4 x 10mm cross flat head bolt * 2 J) M4 x 25mm cross flat head self-tapping screw * 4 K) Mechanical key * 2 L) Strike plate * 1 M) Latch holding plastic box * 1 According to the map drilling holes on the door
Step 2 Install the deadbolt (E) with screws (J) on the door. Note: The deadbolt has TWO backset options: 60mm or 70mm, please adjust it by yourself. E Step 3 H Note: DO NOT Push the latch out before installation. Install outdoor unit(A) with cylindrical sleeve bolt(F)and gasket(B) on outdoor unit(A). F Step 4 J A B Install mounting plate (C) with M4 cross flat head bolt (H) on the door. C Note: The cable goes through the notch on the lower right part of the mounting plate at first.
Install indoor unit(D) with M4 cross flat head bolts(I、G) on the door. Step 5 D I L G R If it is a left hand door, please turn the switch to L. If it is a right hand door, please turn the switch to R. VERTICAL Note:(1) If it's a RIGHT opening door lock, pls put the lock spindle VERTICALLY into the hole connected to the knob at the indoor unit of the lock, and the rotating part of the knob should also be turned to VERTICAL position.
Feartures Accessing - Three ways to access the lock: Bluetooth access, Pin code & Mechanical key. Safety - There are multiple safety mechanisms within the lock. a) Auto Lock: After an unlocking, S110BBL can lock automatically after a period of time (can be 5s, 10s, 30s, 60s or custom seconds, the time can be set via the smart phone App) b) Keypad Locked: After 6 failed pin code attempts, the keypad will shut down for 3 minutes before being able to attempt the pin again.
App Operation Guide 1. APP Installation and Registration 1.1. Download the "TTLock" App form Google play store or Apple store. 2.2. Install and register an account with your phone number or email. Note: The APP only supports Android 4.3 / IOS7.0 version and above. Once you pair a device with your phone/account, the device will not be able to link to other accounts, unless you remove the link from the App. 2. APP Connection 2.1. Turn on the Bluetooth on your phone. 2.2. Open the APP.
3.3. eKeys: A file to manage the status and history of eKeys. 3.4. Passcodes: A file to manage the status and history of Passcodes. 3.5. Records: View locking and unlocking information to check when and who used it. 3.6. Authorized Admin: Authorize the admin to the users who can operate the lock as an A dmin user. 3.7. Setting 3.7.1.
Operation Instructions for Different Functions 1. Unlock 1.1. Unlock with APP: Turn on the app and click the lock icon in the interface to unlock it (The phone should be within 10 meters from the door lock). 1.2. Unlock with passcode: enter the numeric passcode and then press the # key to confirm the unlocking (The Admin Passcode can be set in the APP setting). 1.3. Unlock by touching the keypad: Open the APP, then turn on the“Touch to Unlock option”in the System Settings.
5. Switch Administrator 5.1. Delete the Administrator right Open the APP- locate the lock - click Setting - click Delete - enter your account password - click OK - Using a new phone to pair the lock again. A lock can only be paired with one administrator phone. Please stand within 10 meters away from the lock to open and connect the APP. 5.2. Switch through the Transfer locks function.
FQA Q: How can I reset my ttlock app account if I forgot my password? A:1. Open the ttlock lock App, click Forgot password, enter the email address you registered for your ttlock account. 2. Enter a new password, check Get code. You should receive verification code in the email, Enter the verification code to reset your password. Use the new password to sign in the account. Q: Can I still use the smart lock when my phone is lost or turn off? A:1. Yes.
Q: The smart lock has started beeping whenever I lock or unlock the door. A:This is an indication your battery is low; it's time to change the batteries. Q: I'm unable to open the door from a distance of 10 meters / yards A:1. The app works via a Bluetooth connection, which can be impacted by the environment. 2. For both security and functionality reasons, try moving as close as possible to the lock." 3. The battery is low, use the emergency power supply for the door. Important Safeguards 1.
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.