User's Manual

www.mcohome.com User Manual
MCOHome Technology Co., Ltd
1
Fan Coil Thermostat
MH8-FC/MH8-FC4
Introduction
MCOHome Fan Coil Thermostat is a Z-Wave enabled device for indoor temperature control. It is
mainly applied to a 2-pipe or 4-pipe Fan coil system. It can read room temperature and local time, and
automatically control fan speed based on the temperature difference. The device is of high reliability
and practicability. This product can be included and operated in any Z-Wave network with other
Z-Wave certified devices from any other manufacturers.
Features：
 Capacitive touch buttons
 Tempered glass panel, PC alloy enclosure
 Precise temperature calibration function
 Non-volatile Memory, working state saved even power failure
 Intelligent on/off control of 3-speed fan, electric (ball) valve or air-valve
 Easily steel frame back plate installation
Specification
 Power Supply：AC85V~260V, 50/60HZ
 Resistive Load: ≤3A
 Self Consumption：< 1W
 Temperature Sensor: NTC 15K
 Display Accuracy: 0.1 ℃
 Working Environment：0～55℃; <95%
RH（Non-condensation)
 Temp. Setting :5～35℃（41~95℉）
 Dimension：86* 86*42mm
 Hole Pitch ： 60-65mm （ 86 Standard
junction box）
 Z-Wave Frequency: 868.42MHz(EU)/
908.4MHz(US) or other customized
frequency
Safety Information
To protect yourself and others from danger and to protect the device from damage, please read the
safety information before using it.
Important!
 A qualified electrician with the understanding of wiring diagrams and knowledge of electrical
safety should complete installation following the instructions.
 Before installation, please confirm the real voltage complying with the device’s specification.
Cut off any power supply to secure the safety of people and device.
 During installation, protect the device from any physical damage by dropping or bumping. If
happens, please contact the supplier for maintenance.
 Keep the device away from acid-base and other corrosive solids, liquids, gases, to avoid damage.
 Avoid overexertion during operation, to protect device from mechanical damage.
 Read all instructions and documentation and save for future reference.