Smart Door Lock User Manual Special Attention: 1. Mechanical keys please keep outdoor, just in case keys lock in doors. 2. Please charge for the battery when low wattage alarm. 3. Reading this manual carefully before installation, and keep it for future reference.
1.
2.Specifications Suitable for Models G20 Materials Zinc Alloy Lock Size 370*79mm Lock Body Type 60*68 Unlocking way Fingerprint/Password Card/Mechanical key Colour Red Brass/Golden/Black Doors Applicable Wood Door Door Thickness to Fit 40-120mm Working Voltage 6V (4x AA Batteries) Low Wattage Alarm Below 4.
3.
4.Registration 4.1 Connect lock to the phone 1) Android mobile phone, please scan the QR code as above 2) Apple mobile phone, please search “TTlock” from App Store. 3) Register a new account (phone number or email) or login with an existing account.
4.2 Unlock(The Admin unlock) 4.2.1 Bluetooth unlock After mobile phone and door lock connected,Click " " as show as figure2- 1 to unlock.(the phone is within 5meters from the door lock) 4.2.2 remote control unlock(Option) After confirming that your phone and door lock are connected to the gateway,Click " " as show as figure 2-1 to unlock.You can unlock it anywhere you have a network.(How to set up the gateway to connect to your phone refer to step 5.3) 4.2.
4.2.5 Fingerprint unlock Click " " as shown in finger 2-1→Click " "→Add Fingerprint→set the name and effective time of the fingerprint → Start → Place your finger on the sensor follow the instructions → Add fingerprint OK→Place your fingerprint on the sensor to unlock. 4.2.6 Dynamic password unlock Click " "as shown in finger 2-1 → You can set the effective time and effective number of passwords→Generate password→Input password to unlock.
4.3 Set up the connection between the gateway and the phone(Option) Ensure your phone is connected to the desired WIFI network→Click " Click "Gateway"→Click " "as shown in finger 3-1→ " on the top right corner→ Enter WIFI password and Gateway name as shown in finger 3-2→Longer press the SETTING key until the Green LED blinks faster,then press "Next" as shown in finger3-3→Setup complete 4.
4.6 Fingerprint management 1) Click " "as shown in figure 2-1 →Click " "on the upper right corner of the interface→ Choose "Clear Fingerprint" or "Add Fingerprint" according to your needs. 3) If you only need to manage some of the Fingerprints,click the Fingerprint that you want to manage,your can manage it or delete it according to your need. 4.
Packing list picture name Front Panel Rear Panel User manual mortise quantity 1 1 1 1 name Pointed screw Strike Box Mechanical Key card quantity 4 1 2 2 picture picture name Square Shaft quantity 1 Pull the screw posts Pull the screws back back and forth and forth 2 2 5 Gateway 1(Option)
Guarantee Customer name: Customer calls : Purchase date : Product name : Product model : Note: 1) please keep this card so that you can use it when you need warranty service. 2) we provide you with a one-year warranty from the date of purchase. 3) this warranty service is valid for customers in any country in the world.