User's Manual

All-in-One PC
User Manual
Thank you for choosing our All-in-One PC,Please read
this user manual carefully before using this
product
and
retain it for future reference.
Technical Details
Display
23.8-inch 2k display
Intel Core 4th Generation i5-4200M Processor (Dual Core, 3M Cache,
2.5 GHz, with Turbo Boost up to 3.1GHz w/HD Graphics 4600)
802.11ac Wi-Fi wireless networking;IEEE 802.11a/b/g/n compatible,
Bluetooth 4.2 wireless technology
Processor
Wireless
尺寸：160*120mm*4 折叠方式：折页 材质：157g铜版纸+过油
Ram
4GB DDR3
Rom
256GB SSD
Video Support VGA video output,HDMI video output
Starting for the first time
When you start your computer for the first time,a series of screens appear to guide you
in configuring your windows 10 operating system.
To start your All-in-One PC for the first time:
1.Press the power button on your All-in-One PC.Wait for a few minutes until the setup
screen appears.
2.From the setup screen,pick your region and a language to use your computer.
3.Carefully read the License Terms,Select I accept.
4.Follow the onscreen instructions to configure the following basic items:
* Personalize
* Get online
* Settings
* Your account
5.Once the setup process is complete,the start screen appears.
1.Press the computer power switch located on the back of the host to start the
computer and enter the operating system.
2.Precautions for moving the pc.
Shutting down (turning off ) the computer
The Shut down command closes all open programs, including the operating
system, and then turns off the computer. Shut down the computer under any
of the following conditions:
1. When you need to access components inside the computer
2. When you are connecting an external hardware device that does not connect
to a USB or video port or to a headphone or microphone jack
3. When the computer will be unused and disconnected from external power for
an extended period
Although you can turn off the computer with the power button, the recommen-
ded procedure is to use the Windows Shut down command.
Connecting Bluetooth devices
Before you can use a Bluetooth device, you must establish a Bluetooth connection.
1. Type bluetooth in the taskbar search box, and then select Bluetooth and other
devices settings.
2. Enable Bluetooth, if it is not already enabled.
3. Select Add Bluetooth or other device, and then in the Add a device dialog box,
select Bluetooth.
4. Select your device from the list, and then follow the on-screen instructions
Dialy maintenance
1. Please pay attention to heat dissipation during use, especially pay attention to the
following points:
1): Do not let the direct sunlight on your all-in-one computer.
2): Do not place the all-in-one computer near a heat source.
3): Do not block the heat dissipation hole of the all-in-one computer with other objects
during use.
2. Do not spill water and other liquids on the all-in-one computer. If this happens acci-
dentally, you should immediately disconnect the all-in-one computer power.
3. Dust is also bad for the use of the all-in-one computer. At regular intervals, such as
half a year, the all-in-one computer should be cleaned.
4.Avoid putting pressure on the LCD screen surface and avoid wiping the LCD screen
surface with water.