User's Manual

ManualsBrandsGuangdong Xizhongxi Technology ManualsElectronicsTWS

Earbuds indicator

The earbuds

connect successfully

After successful pairing, the light of the

main ear flashes alternately in red and

white

Specifications

Version V5.2+EDR

Support HFP,HSP,A2DP,AVRCP

Transmission distance 10m

Frequency range 2.402GHz~2.480GHz

Speaker Φ 10mm* 2

Impedance 32 Ω

Standby time 60 hours

Talking time 5 hours

Playing time 6 hours

Earbud battery capacity 50mAh

Fully charged time 1 hour

Charging case battery capacity 380mAh

Charging time of charging case About 1.5 hour

Weight (single earbud) 4.7 g

N05

User Manual

Button control

Attentions

iOS and part of the Android users can awake

the voice assistant by 4-click the L/R earbud

touch button.

Siri and other Voice Assistant

The voice assistant will be automatically activated

depends on different OS in mobile system.

demonstration

Error

1 3 5

7 9 11

13 1715

OFF

Make sure that the ear

caps face down and put

the earbuds into the ear

in the angle shown as

the picture on the right.

After putting on the

earbuds, gently

rotating the earbuds

to a comfortable and

secure position shown

as picture 3 on the right.

Now the earbuds are

put on correctly!

Do not wear the earbuds

like the way shown as

the picture on the right

4.The indicator of one earbud will go off and

another will flash red and White light

alternately

(In pairing mode)

Red &White

Flash

Indicator off

Thanks for using our wireless electronic

products. For a good user experience, please

read the manual carefully before using the

products. Notice: To avoid unnecessary troubles,

please do not disassemble these products by

yourself, and please use the standard charger to

charge.

Please make sure that the products are

dry. If there is water droplet on the surface,

please wipe it with a dry cloth before

putting them back into the charging case to

avoid demaging the device.

3.Open the charging case, the earbuds will turn

on and pair automatically, waiting to be pairing

with the device (the indicator light will alternately

turn red and white)

●The earbuds will automatically turn on after

opening the top lid of the charging case.

●Press and hold the power switch for 5s then

stop to hold, the earbuds will turn on.(Not in the

charging compartment and is in the off state)

●

Put the earbuds into the charging case and

the lid, they will automatically

shut down.

●

While in the non-working state, press and

hold the

power switch

for 5s, the two earbuds

will be turned off at the same time.

●

Automatically shut down after not connected

for more than 10 minutes

Warm notice： If earbuds are not turned on or

there is no sound come out, please put the earbuds

back into the charging case and close the lid again,

make sure that earbuds are in the charging state

before opening the lid and taking out them to use

(red/White light flash alternately)

Status

Light

Turn on

White light flashes for 1 second

Turn off

Red light flashes for 1 second

Search earbuds

Red and white light flash alternately

Music play

No light

Clear connection and

pairing memory

Turn off after the red

light is on for 1 second

Calling No light

Connect with mobile phone successfully

No light

Low battery

Red light of earbud flashes once every 3s

Charging

Red light on

Full battery Red light off

Turn on ANC mode

Turn off ANC mode

Turn on

Transparency mode

In a non-calling state, click the MFB button

once on the left earbud to switch the following

modes in turn.

TWS state

ANC (Active Noise

Cancelling)

Charging case indicator

Warm notice

For any single earbud, when it is in standalone

mode, you can’t use it to play the previous song

or decrease the volume.

Settings

Bluetooth

N05

Bluetooth

Now discoverable as”Qi iPhone”.

MYDEVICES

To pair Apple Watch with your iPhone, go to the

Watch app.

First time using

Restore factory setting

1.When the earbuds are turned on and not

connected to the cell phone, quickly touch

the left and right earbuds buttons 5 times at

the same time, the red light will be on for

1 second, then the earbuds clear the memory

and shut down automatically .

2.Please delete all paired records on the

phone and search again for "N05"on the

bluetooth of mobile phone and reconnect.

There is a built-in lithium battery in this

product. To avoid explosion, do NOT

expose the product to strong sunlight,

fire or throw it into fire.

Battery Warning ！

1.Do not use corrosive liquid to clean this product.

3.Do not use this product under extreme circumstances

for temperature below -10 degree Celsius or above

60 degree Celsius .

4.To avoid explosion, please do not throw this product

into fire.

5.To avoid scratches, please do not touch the earbuds

with sharp objects.

6.Do not insert objects into the earbuds, otherwise it

would cause damage to the internal components.

7.Do not disassemble the earbud.

8. Please keep regular charge to earbuds, don’t leave

them become empty battery status to keep their lifetime.

9. Please do not charge products with power

adapter over 2A current. Excessive current may

cause the damage to battery.

2.If it comes into contact with chemicals, please rub

it with a damp cloth wet with clean water.

Product overview

Choose the ear cap that suits you.

Decline

Reject

track

Next track

Volume- Volume+

Play/Pause

Voice assistant

Settings

Bluetooth

N05

Bluetooth

Now discoverable as”Qi iPhone”.

MYDEVICES

To pair Apple Watch with your iPhone, go to the

Watch app.

Bluetooth

Forget This Device

N05

Device Type

Forget Device

cancel

5.Turn on the Bluetooth function on your phone

and search for【N05 】and connect it.

2 4 6

8 10 12

14 18

1.Tear off the insulating film.

Charging case：Please use a charger with an

output voltage of DC5V/1A to charge the charging

case. You can also use a computer USB or other

USB interface charger to charge (Must choose a

charger certified by a regular manufacturer）.

Magnetic Contact Pin

Earbud Cap

Charging Case

Indicator

Microphone

MFB Touch Button

Indicator

Put the earbuds in the charging case, and the

lid must be closed to charge it, and they will

automatically turn off and disconnect when

the charging case lid is closed.

Steps of charging for earbuds:

2.Put the earbuds into the charging case

and close the lid to charge(the earbuds

are in charging state).

If there is noise, broken sound, or low sound,

please take off the silicone ear cap and wipe it

with a cotton swab.

If the earbud is not charged properly, wipe

the charging column with a cotton swab, and

then charge it again.

ANC

Status

White

light

Left earbud in charging "L" light on the charging case on

Left earbud in full battery "L" light on the charging case off

Right earbud in charging "R" light on the charging case on

Right earbud in full battery "R" light on the charging case off

LED lights on when opening LED lights off after about 15s

the charging case

Charging case in full battery 3

white

LED lights on

the charging case on

Charging case in low battery "L" light on the charging

case is flashing

100%

66%-99%

33%-65%

5%-32%

TWS state

Switch ANC

Charging indicator of Right earbud

Charging indicator of Left earbud

Gentle Tips: For two unpaired earbuds and no device is

connected also at the meanwhile, three-click the left/right

earbuds after turning on to enter the TWS pairing state,

the white light flashes quickly; when pairing is

successful, the red and white flashes alternately.

Note: Nothing need to do if the earbuds are paired and

connected.

If you want to connect with another device, please turn

off the Bluetooth function in the previously connected

device or delete the pairing name of 'N05',then you can

search "N05" in a new device to pair and connect them.

L&R Earbud

FCC Caution